12 volt 3 position ignition switch Key removes only in Off, spring return. Electrical rating: 12 volt DC - 10A ignition/5A start. 3 brass screw terminals - chrome plated brass face nut. Brass: case/mounting hardware. Brass mount stem: 13/16"-24 long 1-7/32". Fits panels up to 1" thick. Weight: .1 lb

Comes with kit of tubes and hoses, reducing foot and adapter Use for bilges, sump tanks, transfer, or oil changing from engine crank case, stern drive or inboard. Tube to insert in dipstick hole for oil pump out. Tough marine plastic will not rust or corrode. No priming to start pump action. Red discharge tube, gray hand pump. Weight: .75 lb

Prevents you from starting while in gear and activates backup lights. May activate a buzzer when control is moved to reverse. For use with Allison MT 30 and 40, HT 70 transmissions. Manufacturer's number: B45184. Color: Black.

Reduces labor and increases your bottom line. Masker is ergonomically designed and easy to use. Kit contains: - QM5000 masker - 1 roll of 72" X 90' masking film - A 12" film cutting blade - 1 roll of 1.5" X 164' KleenEdge PerfectEdge painting tape.

STA-BIL, America's top selling fuel stabilizer.
Keeps fuel fresh for quick, easy starts after storage.
Removes water to prevent corrosion.
Cleans carburetors and fuel injectors.
Protects engine from gum, varnish, rust, and corrosion.
Eliminates the need to drain fuel before storage.
Part #: 22206.
Use 1 oz. in 2.5 gallons.
Size: 10 oz. (treats up to 25 gallons).

STA-BIL, America's top selling fuel stabilizer.
Keeps fuel fresh for quick, easy starts after storage.
Removes water to prevent corrosion.
Cleans carburetors and fuel injectors.
Protects engine from gum, varnish, rust, and corrosion.
Eliminates the need to drain fuel before storage.
Part #: 22214.
1 oz. treats 2.5 gallons of fuel.
Size: 32 oz. (treats up to 80 gallons).

Gasoline vapor warning plaque. Bright yellow plastic construction. A good warning to post near starter switch. Size: 4-1/2" X 2". Weight: .01 lbs.

Protects fuel during storage.
Engineered to enhance fuel performance.
Increases fuel lubricity and prevents gelled fuel.
Increases cetane levels for easier cold starting.
Intended to clean system of sludge.
Two ounces treats 15 gallons.
"EZ-pour" bottle dispenses a measured amount.
Size: 16 oz.

"Before starting engine operate blower 5 min." Color: Yellow and black.

"Before starting engine operate blower 5 min." Color: Black.

Provides outboard engines with more fuel for quick starts. Includes safety check valves. Size: 3/8".

Ideal for inboards, stern drives and outboards.
For single or dual station use.
Controls uses 33C and 43C type cables. Not
suitable for use with Mercury® and OMC® OEM type
control cables. 43C cables require the additional 40
series hardware kit.
Highly polished corrosion resistant stainless steel
covers and handle.
Simple, rugged, compact design.
Mechanical advantage - shift 2.77:1/throttle 2.77:1.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Gear detent kit.
- Additional hardware is required for twin station use.

Single-function control, each lever controls throttle or shift.   
Ideal for inboards, stern drives and outboards.
For single or dual station use.
Highly polished stainless steel cover.
Simple, rugged, compact design.
Easily adjustable throttle friction and shift detent feel.
Mechanical advantage - shift 2.77:1 / throttle 2.77:1.
Uses 33C and 43C type cables.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Shift detent kit (if used in dual stations; use on main station only).
- Throttle hold kit.

Johnson electronic float switch. Vent capped to prevent false starts. Electronics are sealed in epoxy and high-impact plastic. Model number: 36252. Operates on 24 volts, 10 amps. Dimensions: 3-1/4" X 1-1/2" X 3".

Quickly cleans and dissolves varnish, gum, gunk, dirt, and carbon deposits.
Aids faster starter and smooth idling.
Helps restore performance and gas mileage.
For all carbureted internal combustion engines.
Safe for catalytic converters and oxygen sensors.
Leaves no oily residue.
VOC compliant formula.
Size: 12 oz.

Nylon pump body. Automatically starts when pressure drops to 50 psi. Rated for 5.2 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

Insulates stud type connectors. For on alternators, starters, windlasses and other devices. .50 stud. Black PVC construction.

Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices Material: PVC Cable Size: 2-2/0 Weight: .07 lb

Insulates stud type connectors. For on alternators, starters, windlasses and other devices. 8-4 wire. Black PVC construction.

Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices Material: PVC Cable Size: 8-4 Weight: .05 lb

Insulates stud-type connector. For alternators, starters, and other devices. For 18 - 10 gauge wire.

Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices Material: PVC Cable Size: 18-10 Weight: .05 lb

Interstate deep-cycle battery. Provides long life and reliable starting power. 12 volt. Terminal style L. Interstate Battery product ID: DSRM-8DL. Size: 11.12" X 20.75" X 9.88". Weight: 127 lbs.

Corrosion-resistant plated steel wire.
Pyramid shaped trap.
Strung with tough poly take-up cords.
Size: 14" X 14".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Complete cylinder and piston replacement assembly.
For CL-B4 and CL-T4 Hynautic control heads.

Single station - single engine hydraulic steering system.
Designed for smaller outboards up to 150 HP.
Low-friction, 5 turns from lock-to-lock.
Balanced cylinder, featuring a compact design that fits most
splashwells and provides full engine movement.
Compact helm has only a 5" footprint; needs only 3" dash hole.
Standard 3/4" tapered steering shaft.
Fast, easy installation.
Includes:
- BayStar helm pump (HH4314-3)
- BayStar cylinder (HC4645H)
- BayStar tubing kit (HT4420H with two 20' hoses)
- Hydraulic steering fluid (2 each HA5430)
- Filler kit (HA5438)
- Detailed instructions.

Complete cylinder and piston replacement assembly.
For ST-06 Hynautic control heads.

STA-BIL Marine, America's top selling marine fuel stabilizer.
Keeps fuel fresh for quick, easy starts after storage.
Removes water to prevent corrosion.
Cleans carburetors and fuel injectors.
Protects engine from gum, varnish, rust, and corrosion.
Eliminates the need to drain fuel before storage.
STA-BIL Marine is concentrated to outperform regular STA-BIL.
Will improve your marine engine performance year-round.
Part #: 22239.
Treats up to 80 gallons.
Size: 8 oz.