1 - 36 of 38 ▶|
View:
 
Description
Price
Quantity

DUCT SEAL BLACKBURN 1LB

Duct seal compound
Paintable, non-toxic sealant that is pliable and soft. It can be used on oddly shaped gaps and holes. Does not damage or corrode plastic or metal. 1 lb. block.
Item#:
BHWTABDX1
6.9800
4.65
EACH

BONDO FIBERGLASS FILLER 272 QT

Bondo Fiberglass Repair -Quart
Unique reinforced filler containing short, interlocking fiberglass strands and fibers that make it twice as strong as regular body filler Repairs small (dime size or smaller) rusted-out metal holes and shattered fiberglass body parts Eliminates the need for backing strips, fiberglass resin or cloth on small holes and rusted-out areas Sandable in only 20 minutes and compatible with all paint systems - Waterproof - Includes red cream hardener Weight: 2.5 lbs
Item#:
BON272
Manufacturer:
Three M (3M) Marine
23.4500
18.76
EACH

KIT GIT ROT 4 OZ

Git Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 4 oz.
Item#:
BTL1063
Manufacturer:
BoatLife / Life Ind.
24.9700
20.58
EACH

KIT GIT ROT PINT

Git-Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 pint.
Item#:
BTL1064
Manufacturer:
BoatLife / Life Ind.
57.0500
47.03
EACH

KIT GIT ROT QUART

Git-Rot liquid epoxy kit
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 quart.
Item#:
BTL1065
Manufacturer:
BoatLife / Life Ind.
96.2800
79.36
EACH

FIX REPAIR PUTTY WHITE 3 OZ

Two-part Fix repair putty
Fix repair putty. A non-sagging repair putty that cures like steel. May be used underwater. Once cured, Fix putty may be drilled, sanded and painted. Bonds well to fiberglass, wood, metal, glass and concrete. Easily cleaned up with soap and water (before cure). Size: 3 oz. Weight: .2 lb.
Item#:
BTL1197
Manufacturer:
BoatLife / Life Ind.
24.4500
20.14
EACH

FAMOWOOD FIR 1/4 PT

Famowood wood filler - 1/4 pt.
Famowood wood filler. A professional wood flour-based substance. May be stained, sawed, drilled, sanded and more. Will fill just about any hole or crack. Colored to match fir wood. Size: 1/4 pint. Weight: .47 lb.
Item#:
FAM36041116
Manufacturer:
Eclectic Products
5.6700
4.54
EACH

FAMOWOOD MAHOGANY 1/4 PT

Famowood wood filler - 1/4 pt.
Famowood wood filler. A professional wood flour-based substance. May be stained, sawed, drilled, sanded and more. Will fill just about any hole or crack. Colored to match mahogany wood. Size: 1/4 pint. Weight: .47 lb.
Item#:
FAM36041122
Manufacturer:
Eclectic Products
6.2500
5.00
EACH

FAMOWOOD OAK 1/4 PT

Famowood wood filler - 1/4 pt.
Famowood wood filler. A professional wood flour-based substance. May be stained, sawed, drilled, sanded and more. Will fill just about any hole or crack. Colored to match oak wood. Size: 1/4 pint. Weight: .47 lb.
Item#:
FAM36041128
Manufacturer:
Eclectic Products
5.6700
4.54
EACH

FAMOWOOD RED OAK 1/4 PT

Famowood wood filler - 1/4 pt.
Famowood wood filler. A professional wood flour-based substance. May be stained, sawed, drilled, sanded and more. Will fill just about any hole or crack. Colored to match red oak wood. Size: 1/4 pint. Weight: .47 lb.
Item#:
FAM36041134
Manufacturer:
Eclectic Products
5.6700
4.54
EACH

FILLER RAGE GA W/ HARDENER

Rage Filler - Gallon
Premium filler is tack-free and stain-free Reduces risk of staining top coats Will not load or clog sandpaper. No cheese grating needed. Cures to non-tacky surface in 15-20 minutes. Blue cream hardener included. Weight: 9.25 lbs
Item#:
FGE100106
Manufacturer:
Evercoat Co.
119.2000
95.36
EACH
Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: White.
Size: 4 oz.
Item#:
FGE100340
Manufacturer:
Evercoat Co.
9.2400
7.39
EACH
Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: Blue.
Size: 1 oz.
Item#:
FGE100361
Manufacturer:
Evercoat Co.
3.9900
3.19
EACH

POLYESTER GLAZING PUTTY 36 OZ

Polyester Glazing Putty
The original polyester glazing putty Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats. Easily fills grind marks, pinholes, low spots and other minor imperfections. Contains ZNX-7 for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes. No shrinkage. Easy dry. Reduces risk of staining. Blue cream hardener included. Weight: 2.75 lb
Item#:
FGE100400
Manufacturer:
Evercoat Co.
55.0900
44.08
EACH
High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1 quart
Item#:
FGE100570
Manufacturer:
Evercoat Co.
47.1100
37.69
EACH
High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1 pint
Item#:
FGE100571
Manufacturer:
Evercoat Co.
33.3100
26.65
EACH
Call to Order
High quality, white plastic filler. For permanent repair of fiberglass, wood, metal. Useful for filling dents, scrapes and gouges. Will not shrink, crack, or pop out after curing. Can be tinted with coloring agents. Includes hardener. Size: 1/2 pint.
Item#:
FGE100572
Manufacturer:
Evercoat Co.
20.4800
16.39
EACH

POLYESTER GEL PASTE PT

Polyester Gel-Paste
Make gelcoat quality repairs with a simple paste. For fixing scratches, nicks, and gouges. Mixes with Evercoat color agents to match your original hue. Will adhere to gelcoat, fiberglass and most woods and metals Size: 1 pt.
Item#:
FGE100695
Manufacturer:
Evercoat Co.
42.2900
33.83
EACH
Best known for its bridging capabilities in rebuilding shattered fiberglass and for reinforcing torn or rusted areas of sheet metal. Formulated with long strands of chopped fiberglass Double the strength of standard fillers Waterproof. Rustproof. Can be used with or without fiberglass cloth or mat Should be finished with Rage and/or Metal Glaze Blue cream hardener included Weight: 3.666 lbs
Item#:
FGE100868
Manufacturer:
Evercoat Co.
43.5200
34.82
EACH

FILLER METAL-2-METAL QT KIT

Evercoat Metal-2-Metal
Aluminum body repair filler For metal surfaces. Has excellent corrosion resistance properties. Adheres well to galvanized steel and aluminum. Will not sag: known as "the nearest thing to lead". Moisture proof. Easily sands to a fine feather edge. Metal-2-Metal liquid reactor included. Size: 1 qt.
Item#:
FGE100889
Manufacturer:
Evercoat Co.
64.6300
51.71
EACH

CAB-O-SIL QT 25-001

CAB-O-SIL colloidal silica
CAB-O-SIL fumed colloidal silica.
Adds strength to epoxies.
Creates an extremely hard, high-density solid finish.
Ideal for structural bonding, filling, and filleting.
Simply add into mixed epoxy.
Absolutely clear finish when dry; no white residue.
Size: 1 quart.
Item#:
MAS25-001
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
22.7800
13.67
EACH
Call to Order

CAB-O-SIL 1/2 GA 25-002

CAB-O-SIL colloidal silica
CAB-O-SIL fumed colloidal silica. Adds strength to epoxies. Creates an extremely hard, high-density solid finish. Ideal for structural bonding, filling, and filleting. Simply add into mixed epoxy. Absolutely clear finish when dry; no white residue. Size: 1/2 gallon. Weight: .25 lbs.
Item#:
MAS25-002
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
31.8900
19.14
EACH
Call to Order

CELL-O-FILL FILLER 25-003 QT

Cell-O-Fill epoxy filler - qt.
Cell-O-Fill epoxy filler. A fibrous, all-natural cellulose epoxy additive. Reduces sagging and slumping when applying MAS epoxy. Will not billow in the air like silica. Comes as a non-toxic white powder. Size: 1 quart. Weight: 2 lbs.
Item#:
MAS25-003
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
13.6600
8.20
EACH

MILLED FIBERS QT 25-005

Milled fibers - 1 quart
Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1 quart. Weight: .1 lbs.
Item#:
MAS25-005
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
41.0100
24.61
EACH

MILLED FIBERS 1/2 GA 25-006

Milled fibers - 1/2 gallon
Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1/2 gallon. Weight: .2 lbs.
Item#:
MAS25-006
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
74.4600
44.68
EACH

MICRO BALLOONS QT 25-007

Phenolic micro balloons, quart
Phenolic micro balloons, organic phenolic hollow spheres.
Low density, lightweight epoxy additive.
Used when sandable, paint-ready surfaces are required.
Ideal for fairing.
Size: 1 qt.
Item#:
MAS25-007
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
37.9700
22.78
EACH

MICRO BALLOONS 1/2 GA 25-008

Phenolic micro balloons
Phenolic micro balloons, organic phenolic hollow spheres Low density, lightweight epoxy additive. Used when sandable, paint-ready surfaces are required. Ideal for fairing. Size: 1/2 gallon. Weight: .6 lbs.
Item#:
MAS25-008
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
62.2800
37.37
EACH

WOOD FLOUR QT 25-020

MAS 'Wood Flour' - 1 quart
'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1 quart. Weight: .5 lbs.
Item#:
MAS25-020
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
19.7400
11.84
EACH

WOOD FLOUR 1/2 GA 25-021

MAS 'Wood Flour' - 1/2 gallon
'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1/2 gal. Weight: 1 lb.
Item#:
MAS25-021
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
28.8500
17.31
EACH

COMPOUND AQUA ZONE 2 GA KIT

Aqua Zone epoxy putty
A versatile, 1:1 putty for use above or below the waterline. Cures in air or underwater. Two part, hand-mixed. For boat hulls, buoys, docks, and more. Color: Green. Size: 2 gallons.
Item#:
MAS31-010
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
355.8000
213.48
EACH

COMPOUND AQUA ZONE 2 QT KIT

Aqua Zone epoxy putty
A versatile, 1:1 putty for use above or below the waterline. Cures in air or underwater. Two part, hand-mixed. For boat hulls, buoys, docks, and more. Color: Green. Size: 2 quarts.
Item#:
MAS31-020
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
142.6500
85.59
EACH

COMPOUND AQUA ZONE 2 PT KIT

Aqua Zone epoxy putty
A versatile, 1:1 putty for use above or below the waterline. Cures in air or underwater. Two part, hand-mixed. For boat hulls, buoys, docks, and more. Color: Green. Size: 2 pints.
Item#:
MAS31-030
Manufacturer:
MAS Epoxies
 
Ground Shipping Only
85.6000
51.36
EACH

EZ-FAIR 2-PART 7050 8.5 OZ CRT

EZ Fair epoxy compound
A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.
Item#:
PET7050C
Manufacturer:
Pettit Paint / Kop-Coat
 
Ground Shipping Only
46.5900
27.95
EACH

EZ-FAIR 2-PART 7050 1.5 QT KIT

EZ Fair epoxy compound
A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.
Item#:
PET7050Q
Manufacturer:
Pettit Paint / Kop-Coat
 
Ground Shipping Only
111.9700
67.18
EACH
Call to Order
A fast-cure, two-part epoxy fairing putty kit.
Lightweight and microballoon-filled.
Has excellent moisture resistance.
Each part, resin and hardener, are color coded.
Easy to mix.
Non-sagging, butter-like consistency.
Cures enough for machine sanding in 4 hours (@ 77º F).
Mized color: Tan.
Kit size: 1.5 pints.
Item#:
SST1400K40
Manufacturer:
System Three Resins
45.2400
36.19
EACH

CREAM HARDENER F/ BONDO 2.75OZ

3M cream hardener/catalyst
3M cream hardener. A catalyst for fiberglass fillers and putties. Has a creamy consistency that mixes easily and quickly. Size: 2.75 fl. oz. tube. Weight: .5 lb.
Item#:
THM05830
Manufacturer:
Three M (3M) Marine
7.5200
6.02
EACH
1 - 36 of 38 ▶|
View: