Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 21.65 lbs

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1b Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 22.8 lbs

Prevents particles from entering pump. Cuts down on repairs, easy to install. Transparent housing for quick inspection. Stainless steel filter screen. Accepts snap-in ports, one botton port for 90° installations

Intuitive, simple-to-use marine toilet.
Twist-'N'-Lock handle prevents backflow.
White vitreous china bowl - large.
Enameled wooden seat and cover.
Reversible pump mounting for either side of toilet.
Corrosion-resistant, may be used with fresh or salt water.

Long life circulation, high efficiency and flow Use for hot and cold water systems, live well and bait tank systems, liquid transfer also windscreen washing 3/4 " NPT or BPS Dimensions: 6" L x 6-1/2" W x 5" H Weight: 4 lbs

Continuous duty motor and thermal overload protection No harm if pump runs dry Self priming can install above water line Calibrated for correct water movement for lively bait Use with 15 to 30 gallon tanks Includes 3/4" strainer Uses: Diesel fuel, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing, oil elastometer Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb Weight: 4 lbs

Provides high pumping capacity and reliability.
All-in-one pump and intelligent switch.
Designed to activate at 2-1/2" deep water.
Circuit will automatically cycle when needed.
1-1/8" discharge outlet.
12 volts DC.

Cam screws for Jabsco pumps. Pack of three.

Uses: Transferring diesel fuel or pumping light oil Vectra rotor and vanes are not affected by petroleum products; pump head is corrosion-resistant bronze. Self-priming up to 5 ft. and delivers up to 8-1/2 GPM Empties a 55 gallon drum in less than 7 minutes Ports: 1/2" internal pipe threads, 1" external hose barb, includes 3/4" external garden hose adaptors High speed motor is thermally protected, complete with 6 ft. power cord. Dimensions: 5-3/4"H x 5-5/8"W x 9-1/2" L Weight: 19.1 lbs

Neoprene impeller for Sherwood 17000 Weight: 1 lb

Electronic water sensor and pump in one housing.
Provides high pumping capacity and reliability.
Circuit will automatically cycle when needed.
1" and 1-1/8" discharge outlets.
Rated for 2000 GPH.
24 volts DC.

Prevents particles from entering pump. Cuts down on repairs, easy to install. Transparent housing for quick inspection. Stainless steel filter screen. 5/8" hose barb ports.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
1-1/2" discharge outlet.
Model number: 14A.
3700 GPH.

For use with 3000 series manual toilets. Includes seals, gaskets, hardware.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Compact, great for small spaces.
Cycles every 2.5 minutes.
Fully automatic, doesn't require float switch.
High efficiency, low amp motor
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 27SA, round.
Three wire.
1100 GPH.
(Replaces RUL27S-3.)

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 27DA.
1100 GPH.

Designed for washdown or for livewell tanks.
Heavy-duty construction.
Ideal for commercial or pleasure boats.
1-1/2" inlet, 1-1/2" discharge outlet.
Rated for 3700 GPH.
Must be mounted below waterline.
Operates at low pressure; not self-priming.
12 volts DC.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
32 volts DC.
1-1/2" discharge outlet.
Model number: 15A.
3700 GPH.

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
High efficiency, low amp motor.
Built-in strainer base snaps off for easy cleaning.
Includes both straight and 90° port attachments.
24 volts DC.
1-1/2" discharge outlet.
Model number: 16A.
3700 GPH.

Neoprene. 6 blades. Diameter: 1-1/4".

Nitrile. 6 blades. Diameter: 1-1/4".

Fits Jabsco pumps: - 2620-1001 - 11810-0003 - 11810-0013 - 3890-9011 - 5850-0001.

Seat, lid, and hinge kit.
Dimensions: 17.72" X 16.73" X 13.19".
Color: White.

Neoprene impeller for Sherwood 10615 Weight: .425 lb

Replacement strainer base. For round Rule pumps. Rated for 3700 GPH.

Strainer base for Rule pumps. #10, #02, #09, #11. Rated for 1500 to 2000 GPH.

3-Way Hose Fitting "Y" 1-1/8" for Bilge Hose

An optimized impeller gives great flow at low amperage.
A built-in thermal cut-off protects pump and vessel.
Backflow preventer helps keep bilges dryer and cleaner.
Completely submersible, rust and corrosion proof.
Built-in strainer base snaps off for easy cleaning.
3/4" discharge outlet.
Includes both straight and 90° port attachments.
12 volts DC.
Model number: 20DA, square.
800 GPH.

For use with 3" ducting. Output: 105 cubic meters per minute. Designed for flexible mounting. Simple slip-on inlet ducting connection. Corrosion-resistant. 12 volts DC.

For Jabsco pumps. Three per bag.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Self-priming with ability to operate in either direction at variable speeds Removable end cover for easy impeller service 83 GPM - 2" NIPT - 1" diameter shaft Weight: 21 lbs