For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

- 39 GPM maximum inlet flow
- 5000 PSI maximum inlet pressure
- 145 PSI maximum back pressure outlet port
- #12 SAE ORB pressure port
- #12 SAE ORB return port
- #6 SAE ORB load sense port.

Walvoil EX38 end cover - standard end plate.

For DPX100 valve section.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

Open center. 25 GPM. 5000 PSI maximum. Spring to center with fourth position float. Fourth position allows for anchor winch freewheel.

Needed for electrically actuated EX38 valves.
12 volt DC.
With # SAE ORB "Y" port.

Walvoil EX38 full flow sharing sectional valve. 
- Pressure-compensated flow control work sections 
- Sectional valve (1-10 sections) 
- Load sensing 
- Full flow pressure relief 
For use with mechanical, hydraulic, pneumatic and proportional electro-hydraulic controls. 
Manually actuated, spring to center spool. 
16 GPM. 
#10 SAE ORB Work ports 

Pressure compensated flow controlled sections.
Load sense configuration, adjustable pressure relief.
1 spring work section / 2 friction work sections.
Available in 16 GPM or 22 GPM work sections.

Open center / cylinder spool. 12 GPM rated flow. 3625 PSI maximum work pressure. P, A, and B ports #8 SAE O-ring. T port #10 SAE O-ring. Spring to neutral. Nickel plated spool. 2 banks.

Open center / cylinder spool. 12 GPM rated flow. 3625 PSI maximum work pressure. P, A, and B ports #8 SAE O-ring. T port #10 SAE O-ring. Spring to neutral. Nickel plated spool.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Walvoil EX38 full flow sharing sectional valve. 
- Pressure-compensated flow control work sections 
- Sectional valve (1-10 sections) 
- Load sensing 
- Full flow pressure relief 
For use with mechanical, hydraulic, 
pneumatic and proportional electro-hydraulic controls. 
Manually actuated, spring to center spool. 
22 GPM. 
#10 SAE ORB work ports.

Long handle. 
Length: 210mm long. 

1/2" NPT ports. 20 GPM maximum flow. Cast iron body. Hard chrome-plated spool.

3/4" NPT ports. 40 GPM maximum flow. Cast iron body. Hard chrome-plated spool.

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Spring to center.
Cylinder spool.

For Salami pump.

Open center / cylinder spool. 18 GPM rated flow. 3000 PSI. 3/4" NPTF inlet / outlet ports. 1/2" NPTF work ports. Cast iron body, stainless steel spool.

Replacement handle for a hydraulic valve. 
For use with Salami VDM08 valve. 

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Friction hold.
Cylinder spool.

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Rotary.
Cylinder spool.