Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin : hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 gal.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin:hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 pt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 qt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 pt.

100% solids, two-component resin epoxy system.
1:1 ratio by volume.
Cures to a clear, glass-like finish that resists scratching.
Will not distort or blush with age.
Easy to use on table tops, bars and more.
Kit includes two 1 quart bottles.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 pt. Weight: 1 lbs.

Low-viscosity resin Easy-flow low-drip blend of resin and reactive dilutents. No VOCs, no blush. Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations. To use, mix 2:1 resin:hardener with MAS hardener. Size: 1 gal. Weight: 9.4 lbs

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1 qt.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1/2 gal. Weight: 4.2 lbs.

Calibrated resin pumps.
Set contains both the 8cc and 4cc pumps.
May be used with 1 quart, 1/2 gallon, 1 gallon, 4 gallon, and 5 gallon containers.

60cc plastic syringe Intended for use with MAS epoxy. Full load gives you 60 cubic centimeters. Makes it easy to dispense exact amounts Good for small to medium jobs. Reach that difficult spot with ease! Weight: .1 lbs.

Package of ten mixing sticks. A must for MAS epoxy mixing. Weight: .2 lbs.

Wood-colored two-part epoxy adhesive.
Creates a water and weather resistant bond.
Permanent bonding for all types of wood.
Fits standard caulking gun.
Sets in 25 - 30 minutes.
Size: 185 ml.

Low-viscosity epoxy crack filler.
Creates a water and weather resistant bond.
Excellent adhesion and flow for quick repairs.
For gluing and repairing concrete, brick, acrylic, glass, steps, sidewalks, foundations, walls, and more.
Fits standard caulking gun.
Sets in 25 - 30 minutes.
Size: 185 ml.

Two-part, high-strength epoxy adhesive. Creates a water and weather resistant bond. Bonds wood, plastic, fiberglass, insulation and more. Fits standard caulking gun. Sets in 25 - 30 minutes. Size: 185 ml.

For MAS two-part cartridges. Designed for Gluzilla, Woodzilla or Crackzilla. Allows for pre-mixing of product during dispensing. Two per package.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers. gluing slurries and filleting systems are required. Size: 1 gal. Weight: 10 lbs.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers. gluing slurries and filleting systems are required. Size: 4 gal. Weight: 40 lbs.