For use with MAS epoxies. Strong handle, robust construction. Don't destroy your paint roller - use nylon. Length: 9".

 

100% solid, two-component epoxy.

Formulated for deep pour casting, encapsulating, molding.

Cures to a clear, glass-like finish.

Resists scratches and yellowing.

3:1 mix ratio.

Kit consists of 1 gallon resin, 1/3 gallon hardener.

Moderately reactive epoxy hardener. Designed to be used with MAS epoxy resin. Gels and sets quickly enough for controlled application. Manufacturer suggests overnight cure before sanding. Low viscosity, moderate cure. Resin:hardener 2:1 mix ratio. 23 minute pot life; 4 hour set time, 2-7 day cure time. Size: 1 qt. Weight: 2 lbs.

A great low-viscosity epoxy resin, designed with artists in mind.
1:1 mix ratio, long 60 minute working time and improved UV resistance.
Developed with input of dozens of makers, artists and woodworkers.

Size: 2 quart kit.

FLAG epoxy in a handy take-along size. Small enough to keep on board, large enough for most repairs Medium body epoxy designed for fileting, laminating, gluing. Includes 4 mixing containers, 4 pairs of gloves. Size: 16 oz. FLAG resin, 8 oz. medium hardener. Weight: 1.8 lbs.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 gal. Weight: 8 lbs.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 qt. Weight: 2.2 lbs.

Low-viscosity resin.
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding.
600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1/2 gal.

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive diluent solution.
Low VOCs, no blush.
Ideal for boat hull production, laminating, and bonding.
600 cps viscosity for smooth, easy wet-out lamination jobs.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 4 gal.

Marked with standard and metric units.
Capacity: up to 2 oz.
10 cups per package.

'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1/2 gal. Weight: 1 lb.

Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1/2 gallon. Weight: .2 lbs.

Phenolic micro balloons, organic phenolic hollow spheres Low density, lightweight epoxy additive. Used when sandable, paint-ready surfaces are required. Ideal for fairing. Size: 1/2 gallon. Weight: .6 lbs.

CAB-O-SIL fumed colloidal silica. Adds strength to epoxies. Creates an extremely hard, high-density solid finish. Ideal for structural bonding, filling, and filleting. Simply add into mixed epoxy. Absolutely clear finish when dry; no white residue. Size: 1/2 gallon. Weight: .25 lbs.

"5-to-1" hardener, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 pt.

"5-to-1" hardener, designed for bonding and coating wood Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 qt.

A strong, medium-body resin Designed for filleting, laminating, and gluing. Ideal for general-purpose gluing applications where wet-out of fiberglass is not a consideration. Perfect for all your filleting and fairing needs. The medium viscosity works well with fillers. gluing slurries and filleting systems are required. Size: 1/2 gal. Weight: 5 lbs.

"5-to-1" hardener, designed for bonding and coating wood Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 resin. Size: 1 qt.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1 ga. Weight: 8 lbs.

Rapid-cure epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for bonding jobs, spot filling, and fairing. Gels and sets quickly at room temperature. Add to Slow or Medium hardener for custom cure times. Low viscosity, fast cure, very strong. Resin:hardener 2:1 mix ratio. 7 minute pot life; 2 hour set time, 2-5 day cure time. Size: 1 qt. Weight: 2.2 lbs.

"5-to-1" resin, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 hardener. Size: 1 ga.

"5-to-1" resin, designed for bonding and coating wood. Provides superb penetrating power. Has superior moisture resistance and high strength. Must be combined with a MAS 521 hardener. Size: 1 qt.

A must for epoxy work. Spreads, squeegees and more. Each side has different sized teeth to fit any job. Weight: .05 lb.

Designed for use with a single 185 ml cartridge.

Moderately reactive epoxy hardener. Designed to be used with MAS epoxy resin. Gels and sets quickly enough for controlled application. Manufacturer suggests overnight cure before sanding. Low viscosity, moderate cure. Resin:hardener 2:1 mix ratio. 23 minute pot life; 4 hour set time, 2-7 day cure time. Size: 1 gal. Weight: 4 lbs.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin : hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 gal.

Moderately reactive epoxy hardener.
Designed to be used with MAS epoxy resin.
Gels and sets quickly enough for controlled application.
Manufacturer suggests overnight cure before sanding.
Low viscosity, moderate cure.
Resin:hardener 2:1 mix ratio.
23 minute pot life; 4 hour set time, 2-7 day cure time.
Size: 1 pt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 qt.

Penetrates deep into wood surfaces. Adds strength, structure, and restores rotten wood. A two-part kit, resin and hardener. Size: 1.5 pt.

100% solids, two-component resin epoxy system.
1:1 ratio by volume.
Cures to a clear, glass-like finish that resists scratching.
Will not distort or blush with age.
Easy to use on table tops, bars and more.
Kit includes two 1 quart bottles.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1 pt. Weight: 1 lbs.

Low-viscosity resin Easy-flow low-drip blend of resin and reactive dilutents. No VOCs, no blush. Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations. To use, mix 2:1 resin:hardener with MAS hardener. Size: 1 gal. Weight: 9.4 lbs

Low-viscosity resin
Easy-flow low-drip blend of resin and reactive dilutents.
No VOCs, no blush.
Ideal for boat hull production, laminating, and bonding. 600 cps viscosity for smooth, easy wet-out laminations.
To use, mix 2:1 resin:hardener with MAS hardener.
Size: 1 qt.

Slow-speed epoxy hardener. Designed to be used with MAS epoxy resin. Ideal for jobs where increased working time is required. Low viscosity, slow cure. Resin:hardener 2:1 mix ratio. 27 minute pot life; 5 hour set time, 7 day cure time. Size: 1/2 gal. Weight: 4.2 lbs.

Calibrated resin pumps.
Set contains both the 8cc and 4cc pumps.
May be used with 1 quart, 1/2 gallon, 1 gallon, 4 gallon, and 5 gallon containers.

60cc plastic syringe Intended for use with MAS epoxy. Full load gives you 60 cubic centimeters. Makes it easy to dispense exact amounts Good for small to medium jobs. Reach that difficult spot with ease! Weight: .1 lbs.