Saturating wood oil for tropical woods - matte. Gives a rich transparent non-glossy finish. All previous finishes must be removed before use. Wood should be clean and sanded before application. Designed to be applied in multiple coats. Size: 1 liter.

Saturating wood oil for tropical woods - matte. Gives a rich transparent non-glossy finish. All previous finishes must be removed before use. Wood should be clean and sanded before application. Designed to be applied in multiple coats. Size: 2.5 liters.

High gloss oil varnish. Gives a rich, transparent glossy finish. Produces the best results when applied after Deks Olje D1. Wood should be clean and sanded before application. Designed to be applied in multiple coats. Size: 1 liter. Weight: 2.38 lbs

High gloss oil varnish. Gives a rich, transparent glossy finish. Produces the best results when applied after Deks Olje D1. Wood should be clean and sanded before application. Designed to be applied in multiple coats. Size: 2.5 liters.

A versatile, highly penetrating air drying oil.
Can be used alone or added to paint.
Used alone it provides a tough, flexible finish.
Drives out excess moisture and air to stop rust.
Fills dry porous wood to stop paint peeling.
When added to any oil or alkyd based coatings, it gives increased wet edge time and improved flowing and adhesion.
Size: 1 liter.

Owatrol ALU marine aluminum paint. Coating for aluminum and steel surfaces above the waterline Insulates and provides rust protection. Provides good brightness, coverage and lasting adherence. Uses a bright, high quality aluminum pigment Applies direct to rusted surfaces quickly and easily. Resists temperatures up to 347 degrees F when dry. Size: 2.5 liters.

C.I.P - Corrosion Inhibiting Primer. Penetrates and stabilizes surfaces. Creates a solid, stable base layer for other coatings. For use on new or rusted surfaces, interior or exterior. Great for protecting from severe environmental conditions. Size: .5 liter.

C.I.P - Corrosion Inhibiting Primer. Penetrates and stabilizes surfaces. Creates a solid, stable base layer for other coatings. For use on new or rusted surfaces, interior or exterior. Great for protecting from severe environmental conditions. Size: 2.5 liter.

Removes ground-in and surface dirt. Restores a bright look to fiberglass and marine woods. Does not use bleach or chlorine; will not damage wood fibers Fast acting, restores wood to natural color in 20 minutes. Excellent degreaser for tropical hardwoods. Safe to use near plants. Size: 1 liter. Weight: 2.48 lbs.

Removes ground-in and surface dirt. Restores a bright look to fiberglass and marine woods. Does not use bleach or chlorine; will not damage wood fibers Fast acting, restores wood to natural tone in 20 minutes. Excellent degreaser for tropical hardwoods. Safe to use near plants. Size: 2.5 liters. Weight: 5.93 lbs.

A deep penetrating oil that restores gelcoat appearance. Restores dull faded fiberglass to its original color. Restorer penetrates deep into gelcoat to re-wet pigment. Dries to a tough long lasting and flexible finish. Eliminates the need for expensive waxes and polishes. Size: .5 liter.

A deep penetrating oil that restores gelcoat appearance. Restores dull faded fiberglass to its original color. Restorer penetrates deep into gelcoat to re-wet pigment. Dries to a tough long lasting and flexible finish. Eliminates the need for expensive waxes and polishes. Size: 1 liter.

Marine oil rust inhibitor and paint conditioner. A versatile, highly penetrating air drying oil. Can be used alone or added to paint. Used alone it provides a tough, flexible finish. Drives out excess moisture and air to stop rust. Fills dry porous wood to stop paint peeling. When added to any oil or alkyd based coatings, it gives increased wet edge time and improved flowing and adhesion. Size: 5 liters.