Dry powder that may be added to any topside paint to produce an extra rough textured finish.
Mix one pint skidless compound to 1 gallon of paint.
Stir throughly and occasionally during use.

A permanent, waterproof marine-grade sealant and adhesive.
May be applied above or below the waterline.
Provides excellent flexibility with superior resilience for joint movement +/- 25%.
May be used for sealing bilges, joints, or fillets.
OK for use on fiberglass, wood, steel, and other substrates.
Color: White.
10 oz. cartridge.

Non-skid deck paint.
Super tough non-skid finish.
Durable and weather resistant.
Fade and UV resistant.
Easy to apply.
Color: Gray.
Size: 1 gal.

Non-skid deck paint.
Super tough non-skid finish.
Durable and weather resistant.
Fade and UV resistant.
Easy to apply.
Color: Gray.
Size: 1 qt.

Non-skid deck paint.
Super tough non-skid finish.
Durable and weather resistant.
Fade and UV resistant.
Easy to apply.
Color: Off-White.
Size: 1 qt.

A high-performance coating for boat bilges.
Super-tough, fuel, oil and abrasion resistant.
Easy to apply and withstands tough conditions.
Color: White.
Size: 1 quart.

A high-performance coating for boat bilges.
Super-tough, fuel, oil and abrasion resistant.
Easy to apply and withstands tough conditions.
Color: Gray.
Size: 1 quart.

Mold and mildew resistant marine paint.
High-performance coating for moisture-prone areas.
Super tough satin finish.
Adheres to clean surfaces without sanding.
Easy to apply, fast-drying, no odor.
Color: White.
Size: 1 qt.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 quart kit

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: 2 gallon kit.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: Black.
Size: 1 gal.

General purpose tie coat primer.
Use above or below waterline.
Compatible with anti-fouling bottom paints and all types of single component topside finishes.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.

Designed to use with marine paints and varnishes.
Stronger solvent properties and slower evaporation.
Helps paint retain a "wet" edge for longer time.
Cleans brushes after painting.
1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Dull Dead Grass".
Size: Quart.

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 qt.

Bio-Blue hull surface preperant #92.
De-waxes, cleans, etches.
Easy to use.
Biodegradable and solvent free.
Prepares bare fiberglass hulls for painting.
Size: 1 gal.

Features long-lasting UV absorbers.
Provides outstanding gloss retention and UV protection.
Golden amber color.
One quart.

Penetrates raw wood.
Gives improved stability and moisture resistance.
Prevents excessive absorption of undercoaters and varnishes.
Tung/linseed oil phenolic based resin.
Not for use on teak.
Applies easily by brush or spray.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Blue Ice".
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Jade Green".
Size: Quart.

A traditional tough and flexible standard for marine use.
Protects your boat's finish from damaging UV rays.
Will give a light amber tint to brightwork.
Gives a rich, mirror-like finish and abrasion resistance.
Size: 1 quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Bikini Blue".
Size: Quart.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Kelly Green".
Size: Quart.

A powerful chemical stripper that's effective on many coatings and safe for gelcoat.
Designed to strip multiple layers of varnishes, bottom paints, primers and epoxies.
Gel consistency for working on horizontal and vertical surfaces.

Size: 1 quart.

Textured foam roller.
Designed specifically to apply Tuff Coat nonskid coating.
Will evenly distribute the material, which can't be achieved with a standard roller.
Length: 9".

One per package.

Multi-season antifouling bottom paint.
High copper and high density biocide load.
Provides economical hybrid protection.
Polishes to a smooth finish over time.
Compatible over most bottom paints.
Color: Blue.
Size: 1 gallon.

Designed to use with marine paints and varnishes.
Contains mineral spirits and Xylol.
Requires the use of a NIOSH/OSHA approved fitted respirator.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Burgundy".
Size: Quart.

Highly-rated, one-part polyurethane topside paint.
Improved by the addition of silicone for a brilliant shine.
Easy to apply and produces a lasting gelcoat-like finish.
Contains UV filters, which enhance the glossy look and feel.
Color: "Fire Red".
Size: Quart.