Portable fuel tank. Includes a mechanically vented easy-grip fuel cap. Features an easy-to-read mechanical sight gauge. Manufactured from a sturdy, high-density polyethylene. Tank is non-corrosive, unbreakable, and dent resistant. Capacity: 3 gallons. Dimensions: 18-1/8" X 8-7/8" X 9-7/8". 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Connects fuel line assemblies and fuel tanks. For Mercury (1998 and newer). 1/4".

High-quality aluminum construction. Provides anti-siphon protection on all gasoline-powered boat 3/8" male NPT to 3/8" hose barb.

Universal round cup motor flusher. No tools required, easy-to-use For use on all lower units with side water inlets.

Built to strict OEM standards. Designed for use with Honda outboard systems. Attaches to the fuel hose on the engine side. Size: 1/4".

Moeller low-permeation fuel line assembly - 5/16". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034395-10. Intended for use with 5/16" lines. Weight: 1 lb.

3/8" NPT x 1/4" NPT tube. For tanks up to 12" deep. Aluminum construction.

3/8" NPT x 1/4" NPT tube. For tanks up to 24" deep. Aluminum construction.

Traps dirt and metallic particles. Lets you immediately inspect your fuel condition. Not for use on inboard engines. Includes connection barbs in 1/4", 5/16", 3/8".

Removes particles and emulsified water from gasoline. Filtration media will not separate 2-cycle oil from gasoline Designed for: Mercury, BRP (Johnson/Evinrude), Yamaha, Suzuki, Honda, Tohatsu & Nissan engines. Universal use also. High performance 3/8" NPT ports. Powder-coated aluminum filter head. Not recommended for use with diesel engines.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 033389-10 Intended for use with 3/8" lines. Length: 12 feet. Weight: 1 lb.

Brass construction.
Used to connect permanent tank to a single motor.
Hose barb: 3/8".
Pipe thread: 1/4".

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 22".

Gathers fuel level information. Connects to dash mounted gauge without a conversion capsule. Measure tank depth and make the swingarm the correct length. Internal components will not rust or corrode. Float rotates easily in 90° increments. For 6" to 12" deep tanks.

Reinforced polypropylene and metal construction. Suction cups attach to side water inlets or intake. May be used to run motor while out of water. Attaches easily to garden hose.

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 17-3/4".

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 1/4". Connectors on three sides. Handle "clicks" into position.

Clear plastic. Designed for easy inspection. Diameter: 3/8".

Clear plastic. Designed for easy inspection. Diameter: 5/16".

Universal rectangular cup motor flusher unit. No tools required, just slip over inlets. Quickly removes build-up with a simple flush. Removes contaminates from lower unit cooling systems. For use on all lower units with side water inlets. Product # 099076-00.

For aluminum surfaces above or below the waterline.
Strong primer/surface bond is resistant to corrosion.
Corrosive barrier contains high-level of zinc 95%.
Gives maximum resistance against solvents and abrasions.
12 oz. aerosol can.
Color: Zinc rich cold galvanizing gray.

Superior bonding to aluminum and galvanized steel surfaces.
Formulated to work with engine paints.
For use above or below the water line.
Protects against corrosion.
Quick dry formula.
12 oz. aerosol can.
Color: Green.

Superior bonding to aluminum and galvanized steel surfaces. 
Formulated to work with engine paints. 
For use above or below the water line. 
Protects against corrosion. 
Quick dry formula. 
12 oz. aerosol can. 
Color: Yellow. 

Includes a mechanically vented easy-grip fuel cap. Features an easy-to-read mechanical sight gauge. Manufactured from a sturdy, high-density polyethylene. Tank is non-corrosive, unbreakable, and dent resistant. Capacity: 6.5 gallons. Dimensions: 21.18" X 13.5" X 10".
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.