Female to male shut-off valve. Brass construction. Size: 1/4".

Group 29-31 series battery tray.
Non-corrosive hi-strength plastic construction.  
Self locking security knobs.
Stainless steel hold-down rods.
Dimensions: 16.19" L x 7.50" W x 11.50" H.
Holds batteries up to 13.00" L x 7.43" W x 10.00" H.

Non-corrosive high-strength polyethylene construction.
Resists chemicals and rust.
Complete with hold-down strap and mounting hardware.
.185" thick walls.
For 27, 30, and 31 series batteries.
Holds batteries up to 12.75" X 7" X 9.00".
Dimensions: 16.37" X 9.5" X 11.37".

Non-corrosive high-strength polyethylene construction. Resists chemicals and rust. .185" thick walls. For 24 series batteries. Holds batteries up to 10.50" X 7" X 8.37". Dimensions: 14" X 9.62" X 10.75".

Direct-sight mechanical tank sending unit.
A replacement fuel gauge.

Connects fuel line assemblies and fuel tanks. For Johnson / Evinrude. 1/4".

Connects fuel line assemblies and fuel tanks. For Nissan / Tohatsu. 1/4".

Portable fuel tank. Includes a mechanically vented easy-grip fuel cap. Features an easy-to-read mechanical sight gauge. Manufactured from a sturdy, high-density polyethylene. Tank is non-corrosive, unbreakable, and dent resistant. Capacity: 3 gallons. Dimensions: 18-1/8" X 8-7/8" X 9-7/8". 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Connects fuel line assemblies and fuel tanks. For Mercury (1998 and newer). 1/4".

High-quality aluminum construction. Provides anti-siphon protection on all gasoline-powered boat 3/8" male NPT to 3/8" hose barb.

Universal round cup motor flusher. No tools required, easy-to-use For use on all lower units with side water inlets.

Built to strict OEM standards. Designed for use with Honda outboard systems. Attaches to the fuel hose on the engine side. Size: 1/4".

Moeller low-permeation fuel line assembly - 5/16". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034395-10. Intended for use with 5/16" lines. Weight: 1 lb.

3/8" NPT x 1/4" NPT tube. For tanks up to 12" deep. Aluminum construction.

3/8" NPT x 1/4" NPT tube. For tanks up to 24" deep. Aluminum construction.

Traps dirt and metallic particles. Lets you immediately inspect your fuel condition. Not for use on inboard engines. Includes connection barbs in 1/4", 5/16", 3/8".

Removes particles and emulsified water from gasoline. Filtration media will not separate 2-cycle oil from gasoline Designed for: Mercury, BRP (Johnson/Evinrude), Yamaha, Suzuki, Honda, Tohatsu & Nissan engines. Universal use also. High performance 3/8" NPT ports. Powder-coated aluminum filter head. Not recommended for use with diesel engines.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 033389-10 Intended for use with 3/8" lines. Length: 12 feet. Weight: 1 lb.

Brass construction.
Used to connect permanent tank to a single motor.
Hose barb: 3/8".
Pipe thread: 1/4".

Provides anti-siphon protection on gasoline-powered boats. Made of tough aluminum. Features 1/4 NPT threads.

Connects fuel line assemblies and fuel tanks. For Chrysler engines. 5/16".

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034394-10. Intended for use with 3/8" lines. For Yamaha motors. Weight: 1 lb.

Brass construction. Meets ABYC H-24 requirements. Provides anti-syphon protection. Size: 1/4".

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 3/8". Weight: .3 lb.

Connects fuel line assemblies and fuel tanks.
Yamaha.
3/8".

High-quality aluminum construction. Provides anti-siphon protection on all gasoline-powered boat 1/4" male NPT to 1/4" hose barb.

Built to strict OEM standards. Designed for use with Mercury outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Built to strict OEM standards. Designed for use with Suzuki outboard systems. Attaches to the fuel hose on the engine side. Size: 5/16".

Connects fuel line assemblies and fuel tanks. For Nissan / Tohatsu. 3/8".

Connects fuel line assemblies and fuel tanks. Johnson / Evinrude. 3/8".

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034385-10. Intended for use with 3/8" lines. FOr Mercury two-prong clip style lines, 1998 and newer. Weight: 1 lb.

Gathers fuel level information. Connects to dash mounted gauge without a conversion capsule. Measure tank depth and make the swingarm the correct length. Internal components will not rust or corrode. Float rotates easily in 90° increments. For 12" to 24" deep tanks.