Kit for securing an ice chest. Designed to be used with Ice Station Zero coolers. For 125, 170, and 270 quart coolers.

Kit for securing an ice chest. Designed to be used with Ice Station Zero 94 quart cooler.

40 gallon permanent fuel tank. Rotationally molded, cross-linked polyethylene plastic. Aluminum 3/8" withdraw fitting provides 360-degree rotation. Conforms to all ABYC, NMMA and USCG regulations. Dimensions: 26" X 20-1/2" X 18-1/2".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Replacement EPA-compliant fuel cap. 
Audible "click when closed" 2-stage seal. 
Has integrated tether and 2-stage venting mechanism.

For use with Moeller below deck fuel tanks. Weight: .5 lb.

Designed for use in gasoline applications. All reed switch senders are pre-calibrated. Durable SS construction. Gasket and screws (5) included. 22".

Gauge float assembly - PBW 12. For use with Moeller fuel tanks. Manufacturer number: 621006-10. Weight: .4 lb.

Self-priming, quick-dry formula. Designed to withstand up to 1200° F. 12 oz. aerosol can. Color: High heat white.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Volvo metallic silver.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Shadow black.

Brass construction.
Meets ABYC H-24 requirements.
1/4" NPT X 3/8" barb.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034390-10. Intended for use with 3/8" lines. Universal use, 7 feet long. Weight: 1 lb.

Universal motor flushing unit with rectangular cups. A customer favorite. Useful for all engines over 50 horsepower. For use on all lower units with side water inlets.

For surfaces above the waterline Usable on bare metal, steel, iron, fiberglass, and wood. Quick-dry formula covers and fights rust. Improves bonding of color coat. 12 oz. aerosol can. Color: Platinum grey.

Direct sight gauge. Gathers fuel level information with the float. Accurate gauge will fluctuate as the fuel "sloshes". Length: 7-1/2".

Increases luster and depth of paint. Finishes any paint project with a clear seal. Quick-dry formula. Use for all outboard/inboard engines, stern drives. Gives enhanced UV protection. 12 oz. aerosol can. Color: Clear.

Built to strict OEM standards. Designed for use with Honda outboard systems. Attaches to the fuel hose on the engine side. Size: 1/4".

Female 3-way valve bottom outlet. Allows the connection of two permanent tanks to one motor. Will only draw from one tank at a time. Brass construction. Size: 1/4". Connectors on two sides and bottom.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034393-10. Intended for use with 3/8" lines. For Chrysler / Force motors. Weight: 1 lb.

A do-it-yourself fuel sensor and gauge kit. Includes: - Swingarm electric sending unit for measuring fuel levels - Fuel gauge for dash mounting. Components are rust and corrosion resistant. Fully adjustable and accurate. Weight: .5 lb.

Low Profile Manually Vented Fuel Cap Weight: 1.25 lbs

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Mercury Phantom black.

Built to strict OEM standards. Designed for use with Mercury outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Telescoping design is easy to install and use. No tools required. Large cup prevents water blow-by or fall-off during use.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Alpine GM green.

Connects fuel line assemblies and fuel tanks. For Mercury. Bayonet style. 3/8".

Built to strict OEM standards. Designed for use with Mercury outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Caterpillar yellow.

Matched to your engine's original color. Formulated for the marine environment. Use on all outboard/inboard engines, stern drives. Oil and gasoline resistant. Quick dry formula. 12 oz. aerosol can. Color: Gloss white.

Connects fuel line assemblies and fuel tanks. For Yamaha. 1/4".

High-density unbreakable polyethylene.
Reversible self-venting spout.
Color: Light blue.
Dimensions: 15-1/4" X 10-1/2" X 14-1/2".
Capacity: 5 gallon.

Built to strict OEM standards. Designed for use with Nissan / Tohatsu outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Connects fuel line assemblies and fuel tanks. For Suzuki. 1/4".

Straight bulkhead connection. 3/8". Brass construction.

Built to strict OEM standards. Designed for use with Suzuki outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".