Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 3/16" X 12". 10 tubes per package. Color: Black.

Use with 305CRCN or 205CRCN. For 20 and 30 amp female connectors.

Safety duplex cable, 16/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 500 feet per spool. Weight: .05 lb. per foot.

Reinforced nylon base and polycarbonate cover construction.
Features breakouts for superior electrical insulation.
Meets ABYC insulating requirements.
Used with BLS2105, BLS2106 MaxiBus BusBars.

Intended for use with Blue Seas PN 2127 and 2128.
Has breakouts for superior electrical insulation.

Meets ABYC insulation requirements.

Heat-activated adhesive interior. 
When properly used, makes a watertight seal. 
Tinned for corrosion resistance. 
Copper construction with brazed seam. 
UL listed, CSA recognized. 
Size: 22-18. 
Three per package. 

Heat shrink tubing - 1/4" X 48". Cross linked polyolefin tubing is much stronger than PVC. Heat activated adhesive lining provides impervious seals. Protects from saltwater, oil, acid, sunlight, and strain. Able to shrink down to 1/3 of original size. Dimensions: 1/4" X 48". Color: Red. Weight: .15 lb.

Three-prong conductor. Vinyl cord. Provides a telephone connection for boats. Length: 50 feet.

Safety duplex cable, 14/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 100 feet per spool.

Ancor primary wire, 10 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Red. Length: 8 feet.

Locking design. Glass-filled polyester construction. Watertight cap. Rear safety enclosure. Stainless steel trim. 30 amp, 125 volt.

Safety duplex cable, 14/2 AWG. Manufactured from tinned copper for corrosion prevention. Covered with an anti-abrasive, easily-removed outer jacket. Resists cold, salt water, UV rays, and many petrochemicals. Color-coded red and yellow inner conductor wire. Length: 500 feet per spool. Weight: .07 lb. per foot.

Ancor primary wire, 12 AWG. Manufactured from tinned copper for corrosion prevention. Insulated with a flexible proprietary vinyl coating. Resists cold, salt water, UV rays, and many petrochemicals. Color: Black. Length: 12 feet.

Nylon insulated ring terminals. Features double-crimped, tinned copper connectors. Marine grade nylon helps insulate from moisture. Wire range: 12-10 Stud size: #6. 25 terminals per package.

Heavy-duty cable with watertight caps. Features an LED indicator light. Moisture proof sealing ring. Built in 10 amp fuse. Extends to more than 6 feet.

SeaLink 12 volt plug and receptacle.
Provides maximum connectivity.
(12VRC and 12VPG packaged together).

Rugged, insulated copper wire.
Meets USCG standards.
Resists water, acid, oil, UV radiation.
16 AWG.
Color: Gray.
Spool length: 100 feet.

Dual USB charger with 12V receptacle.
Features two ports to charge cell phones, tablets and other devices powered by USB's.  
Blue LED shows that power is available.
Water resistant covers protect against dust and water.  
Dual USB has 12 to 24V DC input with a 5V DC output, a total of 2.1 amps output between the two ports.  
The 12V DC receptacle is rated to 20 amps, and is compatible with 12V plugs.  
Designed for longevity in the marine environment.
Insulated terminals included.

20 amp female connector.

With 4mm power tapping plate. Features increased stainless steel stud length. Clear polycarbonate cover for insulation and protection. Double studs feature "snap out" insulating partition. Size: 8mm. Dimensions: 1.9" x 1.9" x 2.4".

Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .1 lb

With 4mm power tapping plate. Features increased stainless steel stud length. Clear polycarbonate cover for insulation and protection. Size: 8mm. Dimensions: 1.9" x 1.9" x 2.4".

With 4mm power tapping plate. Features increased stainless steel stud length. Clear polycarbonate cover for insulation and protection. Size: 10mm (3/8"). Dimensions: 1.9" x 1.9" x 2.4".

316 stainless steel. Locking waterproof cap. Rear safety enclosure with strain relief. 50 amp, 125 volt.