BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 5.2 fl. oz. Weight: .4 lb.

Teak Brite natural teak oil and sealer. Billed as "the most advanced teak oil and sealer available." Delivers long-lasting protection in all climates.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak.

Teak Brite Oil Sealer exhibits the beauty of teak, prevents graying, and protects wood. Simply apply liberally on dry teak and allow to dry. Do not apply on wet/damp wood. This product penetrates deep into teak to feed the natural oils and protect finishes. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Color: Golden teak.

Size: 1 quart.

Environmentally safe, non-phosphate, biodegradable formula.
Cleans without removing wax from fiberglass.
Use anywhere on your boat.
Pleasant fragrance.
Size: 1 gallon.

Environmentally safe, non-phosphate, biodegradable formula.
Cleans without removing wax from fiberglass.
Use anywhere on your boat.
Pleasant fragrance.
Size: 1 qt.

BoatLIFE PolyShine boat polish. An easy-to-use liquid polymer formula for fiberglass hulls. Shines and protects your boat's surfaces. Brightens chrome and stainless steel hardware. May be applied by hand or by machine. Size: 1 pint. Weight: 1.07 lb.

BoatLIFE VinyLIFE cleaner and protectant. A dual-purpose product: protects as it cleans. Great for interior and exterior vinyl surfaces. Use it on your seats, tops, upholstery, fenders and more. Restores and brightens colors. Removes dirt, grime and stains. UV protectant. Size: 1 pint. Weight: 1.23 lb.

BoatLIFE test tank cleaner. Designed for engine test tanks. Emulsifies oil in water and removes oil slicks. Non-foaming fomula strips away oil and dirt. Safe for use with rubber impellers and hoses. Also useful as a dispersant in small oil spills. Size: 1 gallon. Weight: 8.72 lbs.

BoatLIFE LifeWax. A long-lasting carnauba formula for protecting fiberglass. "The finest marine grade paste wax available." Great for all environments, including tropical climates. Formulated with superior UV filters for ultimate protection. Size: 9 oz. tin. Weight: .7 lbs

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 10.48 fl. oz. Weight: .83 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 10.48 fl. oz. Weight: .83 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 10.48 fl. oz. Weight: .83 lb.

Release adhesive and sealant remover. For removing cured sealants from fiberglass, wood, metal. Ideal for use on residue from decals, tapes and the like. Safe to use on most vinyl, plastic and other surfaces. Size: 1 pint. Weight: 2.72 lb.

Release adhesive and sealant remover. For removing cured sealants from fiberglass, wood, metal. Ideal for use on residue from decals, tapes and the like. Safe to use on most vinyl, plastic and other surfaces. Size: 1 oz. Weight: .17 lb.

BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 1 oz tube.

Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 4 oz.

Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 quart.

Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.

One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.

How to use Git-Rot:
 
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.

For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.

Size: 1 pint.

Teak Brite teak brightener: a single-part liquid cleaner and brightener for teak. It bleaches teak to a lighter shade, which helps eliminate graying from weather exposure. Ideal for mid-season clean up of dirt, grease, food stains and oil.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil. They use this product, Teak Brite teak brightener. Application is simple, apply and rub in, then rinse thoroughly with water and allow drying completely before applying teak oil sealer.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak. Teak Brite Oil Sealer exhibits the beauty of teak, prevents graying, and protects wood. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Size: 1 quart.

Teak Brite natural teak oil / sealer. Billed as "the most advanced teak oil and sealer available." Delivers long-lasting protection in all climates.

If you have teak to maintain, follow the BoatLIFE teak restoration system: it's gentle and non-damaging but highly effective.

1: Cleaning

There are two different Teak Brite products that clean without harming natural teak wood: Teak Brite Powder Cleaner and Teak Brite Kreme Cleaner. The powder must be scrubbed, and the cream should be allowed to sit, before wiping down the wood.

2: Brightening

A middle step in the Teak Brite restoration system. Some boat owners like restore a lighter shade to their teak before applying teak oil.

3: Oiling / Sealing

The final step in the Teak Brite restoration system: applying oil to seal and protect the teak.

Teak Brite Oil / Sealer exhibits the beauty of teak, prevents graying, and protects wood. Simply apply liberally on dry teak and allow to dry. Do not apply on wet/damp wood. This product penetrates deep into teak to feed the natural oils and protect finishes. It's vital to the life of the timber itself, and is absolutely necessary to keep teak in its best possible condition. If you try to clean teak without reapplying oil, it will quickly oxidize, turn gray and soil much more easily. However, you need to use care when applying teak oil. If you use too much, it will have a varnished appearance and will wear unevenly.

Teak Brite will not damage vinyl, plastic, fiberglass, polysulfide, deck sealant, or other seam compounds.

Color: Natural teak.

Size: 1 quart.

BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Brown. Size: 10.5 oz tube. Weight: 1.4 lb.

BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Brown. Size: 80 ml tube. Weight: .42 lb.

BoatLIFE Life Calk liquid sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 80 ml tube. Weight: .4 lb.

BoatLIFE Life Calk liquid sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: Black. Size: 80 ml tube. Weight: .4 lb.

Heavy-duty fiberglass cleaner and stain remover. Non-scratching powder cleanses dirt and stains. Ideal for non-skid surfaces. Will remove rust stains, scuffmarks and black streaks. Rinses off with fresh or salt water. Size: 26 oz. Weight: 2.08 lbs.

Fix repair putty. A non-sagging repair putty that cures like steel. May be used underwater. Once cured, Fix putty may be drilled, sanded and painted. Bonds well to fiberglass, wood, metal, glass and concrete. Easily cleaned up with soap and water (before cure). Size: 3 oz. Weight: .2 lb.

BoatLIFE Life Seal. A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 1 fl. oz. Weight: .17 lbs.

BoatLIFE bilge cleaner. Emulsifies oil and scum, makes your bilge clean. Water-based, non-foaming, biodegradable and phosphate-free. Works well as a carpet, uphostery or fabric cleaner, too. Removes mold and mildew. Great for fish and bait wells. Size: 1 quart. Weight: 2.3 lb

BoatLIFE fiberglass rubbing compound. A very fine compound for smoothing out gel coat surfaces. Mimizes gel coat loss as it smooths out finishes. Restores by removing heavy oxidation and stains. Used to prepare fiberglass for waxing. Size: 16 oz. Weight: 1.25 lbs.

BoatLIFE mildew remover spray. Features a chlorine-free and acid-neutral formula. Simply spray on and wipe down to remove mildew. Controls odor, too. Safe for most fabrics. Size: 16 oz. Weight: 1.03 lbs.

BoatLIFE Liquid Life Seal. A unique combination of marine silicone and polyurethane. Self-leveling liquid formula for fine cracks and seams. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 5.24 fl. oz. Weight: .4 lbs.

A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Clear. Size: 2.8 fl. oz.

A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: Black. Size: 2.8 fl. oz.

A unique combination of marine silicone and polyurethane. Formulated for use on fiberglass hulls. Fast-curing, low odor, non-corrosive and non-yellowing. Provides a durable, permanent watertight seal. May be used above and below the waterline. Use for sealing decks to hulls, fittings, and hardware. Adheres to metal, glass, wood, Lexan, and ABS. Color: White. Size: 2.8 fl. oz.