For use with 3" ducting. Output: 112 cubic meters per minute. For use in engine rooms, galleys or heads. Flange designed to mount directly to bulkhead. Corrosion-resistant.

Complete overhaul kit for marine toilet. Used with Johnson pump toilets.

Whisper quiet operation Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption flush Automatic back-flow prevention Weight: 26 lbs

Reduces water pressure to 40 - 50 psi. Standard 3/4" GHT thread for easy hookup. Corrosion-resistant bronze.

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/2" and 2" ports. Rated for 4000 GPH.

Built from stainless steel and sturdy plastic. Features dual-heating design, both electrical and indirect. Thermostat is fully adjustable for safety. Uses polyurethane foam heat insulation. 5.81 gallon capacity, 1200 watts. For 120 volt systems.

Chrome plated brass faucet. Includes compression fitting hardware. Integrated 35 psi shutoff pressure switch. Low power consumption (2.5 amps at 12 volt). Quiet operation and self priming.

Solid-state, sealed electronic float switch unit. Activates pump at 2" water depth. Deactivates pump at 3/4" water depth. May be attached to all pumps in the Johnson L-series line. Dimensions: 3" X 1-1/2" X 3-1/4".

Johnson electronic float switch. Vent capped to prevent false starts. Electronics are sealed in epoxy and high-impact plastic. Model number: 36252. Operates on 24 volts, 10 amps. Dimensions: 3-1/4" X 1-1/2" X 3".

Digital technology uses mirus field effect detector cells producing micro-electrical fields to detect disruptions caused by water and fluids Cells are totally sealed and never contact water They will not corrode and are not affected by oil or foreign debris No moving parts, totally sealed solid state electronics Environmentally sensitive, no mercury or exposed sensors Activates at 2" fluid level and deactivates at 3/4" fluid level A 3 second delay prevents false starts Weight: .1 lb

Rated for 1000 GPH. For showers, dishwashers, galley sinks, and more. Automatic action for draining from sump tank. Has a tight-fitting lid to prevent spashes and odors. Dimensions: 11.42" X 8.26" X 5.7".

Equipped with fuse. Indicator light shows when pump is active. 12 volts.

Heavy-duty, magnetic-driven, enclosed pump. Permanent magnet, ball-bearing mounted motor. Designed for continuous use. 5/8" or 3/4" hose. Dimensions: 6.97" X 2.68" X 3.35".

Bronze body. 1-1/2" ports. Rated for 73 gallons per minute. 1" shaft.

Original Johnson Pump Style Pump 62 GPM F8B8 Bronze body, stainless steel shaft, 1-1/4" ports, 1"shaft keyd. Mounted shaft with perm. Lubricated double ball bearings. Mechanical seal, neoprene impeller.

100db alarm and LED warning light. Ignition protected and sealed construction. Three way panel switch: Test / Armed / Off.

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/8" and 1-1/4" ports. Rated for 2200 GPH.

Nylon pump body. Nitrile valves and diaphragm. Rated for 3.5 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

Nylon pump body. Automatically starts when pressure drops to 50 psi. Rated for 5.2 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

Designed for automatic operation with an Ultima switch. Rated for 1250 GPH. Equipped with easy-to-install Dura-Port discharge ports. 1-1/8" fitting.

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/8" ports. Rated for 1600 GPH.

Designed for automatic operation with an Ultima switch.
Rated for 1000 GPH.
Equipped with easy-to-install Dura-Port discharge ports.
3/4" fitting.

Nylon pump body. Rated for 3.5 gallons per minute. Activates at 25 PSI, cuts out at 40 psi. Quiet operation, smooth flow. Compact design. 3/8" port, 1/2" hose output. 12 volt DC.

Johnson Aqua Jet water pressure system. A postive displacement diaphragm pump for small craft. Works great for pressurized water supply systems. Rated for 3.5 GPM. 3/8" NPT, 1/2" hose ports. Weight: 5.5 lbs.

Thermoplastic pump body. Rated for 5 gallons per minute. Stainless steel shaft. 3/4" ports. 12 volts DC.

For engine cooling pumps. 12 blades. Diameter: 2.56".

Provides pumping power at the push of a button. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/2" ports.

Has some of the most advanced features in the industry. Rated for 500 GPH. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting. Dimensions: 2.75" X 4.4".

Bilge Pro motor cartridge. For 750 gallon per hour pumps.

Has some of the most advanced features in the industry. Automatic operation, with a non-clogging electric float. Removable motor cartridge for cleaning and replacement. Rated for 750 GPM. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting. Dimensions: 3" X 4" X 4.4".

Rated for 5 gallons per minute. 70 PSI maximum pressure. Includes: - Pump - 25 feet of coiled hose - Pump protector inlet strainer - Spray nozzle - Two-way panel switch with fuse.

Has some of the most advanced features in the industry. Removable motor cartridge for cleaning and replacement. Rated for 750 GPM. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting. Dimensions: 2.75" X 4.4".

Nylon pump body.
Rated for 5.2 gallons per minute.
Activates at 25 PSI, cuts out at 40 psi.
Quiet operation, smooth flow.
Compact design.
3/8" port, 1/2" hose output.
12 volt DC.