Replacement part for F4-8007.

Pump type: F5B-9.
For Volvo, AQ131, AQ140A-170.
JP part number: 10-32621-2.
Volvo part number: 855517.

Nitrile. F7B. Diameter: 2.56". For Johnson pumps.

Nitrile. F7B. 8 blades. Diameter: 2.56". For Johnson pumps.

Replacement impeller, MC97.
2-1/4" diameter.
Kit includes: O-ring, gasket, lubricant.

Able to connect and disconnect under full pressure. Built from 316 stainless steel. Positive lock bayonet connector. Double viton o-ring seals. Large flow capacity. Standard garden hose connection.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 800 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Replacement pump only, does NOT include clutch. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/2" ports.

Replacement end cover for pump repair. #F4-8007.

Provides pumping power at the push of a button. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/4" ports.

Replacement pressure switch for AquaJet water systems. Rated for 40 PSI.

Rated for 75 PSI. For 30700 series pumps.

Nitrile. F3. 6 blades. Diameter: 2.56". For Johnson pumps.

Flexible impeller self priming bronze pedestal pump.
Typical Marine Applications:
-Engine cooling
-Bilge pump
-Wash-down pump
-Emptying holding tanks  
Bronze body. 3/8" NPT ports.  Rated for 6 GPM at 1800 RPM.  Neoprene impeller. 3/8" stainless steel shaft.
Caution: Do not run dry.

Plastic pump body. Nitrile valves and diaphragm. Rated for 8.1 gallons per minute. 1-1/2" ports. 12 volt DC.

Heavy-duty bilge pump. Liquid-cooled, 12-pole motor with double ball bearings. Stainless steel and strong plastic construction. Operates at 120 l/min, 1900 GPH. 4.5 amps, 6 amp fuze. 1-1/8" and 1-1/4" connectors.

For Johnson pumps. Brass construction.

A rotary cutter shreds waste before it is pumped into or out of the holding tank The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet 15 amp - 1-1/2" hose or 1-1/2" NPT inlet - 1" hose outlet Weight: 5.1 lbs

Polypropylene pump body
Rated for 5.2 gallons per minute
Activates at 25 PSI, cuts out at 40 psi
Quiet operation, smooth flow
Has a 2 liter accumulator tank
1/2" hose output
12 volt DC.

Johnson Pump cam For use with F8B.

For use with 3" ducting. Output: 112 cubic meters per minute. For use in engine rooms, galleys or heads. Flange designed to mount directly to bulkhead. Corrosion-resistant.

Bilge, deckwash, and refueling pump. Rated for four gallons per minute. Used for water circulation, not for petrochemicals. Bronze body, stainless steel shaft. Dimensions: 6.7" X 4" X 3.22".

Johnson gear pump with oil change kit. A light, compact oil change pump. Features: - PTFE body and gears - Oil dip stick extraction tube - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14".

Johnson gear pump. A light, compact oil change pump. Features: - PTFE body and gears - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14". Weight: 2.5 lb.

Designed to be easy to mount and remove in tight spaces. Removable cartridge style. Uses easy-to-install Dura-Port discharge ports. Rated for 750 GPH. Dimensions: 5.75" X 3.2" X 2.82".

Polyurethane.
6 blades.
Diameter: 2".
Dry-run capable.
For Johnson ballast pumps and 18220 series pumps.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 600 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Compact toilet.
Electric diaphragm pump runs silent.
Corrosion resistant parts.
White, vitreous porcelain.
Quiet, easy to clean.
Comes with a proven Aqua Jet diaphragm pump.

12 volt DC.

Designed for automatic operation with an Ultima switch. Rated for 500 GPH. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 1000 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Bilge Pro motor cartridge. For 500 gallon per hour pumps.

Replacement part for Johnson pump. #F4-8007.

Uses a mercury-less switch. Attaches to any SPX Johnson Pump Marine bilge pump Can be used with 6, 12, 24, or 32 V systems Rated for 15 amps.