Adapts 33C series cables to be used with OMC engine controls.

Heavy duty balanced inboard brass cylinder with bleed
fittings; chrome plated stainless steel rods & ball joint.
Stainless steel and bronze mounting hardware.
2-axis articulation.
Bore: 2"
Shaft diameter: .75"
Stroke: 7"
Volume: 18.9 cu. in.
Seal kit: HS5184
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.35"
Shaft diameter: .625"
Stroke: 7"
Volume: 8.3 cu. in.
3/8” compression fittings.
Seal kit: HS5155

Replacement 33C 3300 red jacket control cable.
Stainless steel rods, hubs, and end fittings.
10-32 threaded ends, 3" covered core wires.
UV resistant polyethylene outer jacket.
Replaces your Morse 33C control cable.
Size: 17 feet.

For steering systems.
Bronze construction.

Cable-Gard tilt tube seal kit.
For most outboards with tilt tubes.
Helps to keep the tilt tube clean.
The kit is designed to fit engines having a tilt tube
with a minimum of 3/8" length of exposed 7/8-14UNF threads
and/or an exposed lock nut measuring 1-1/4" across the flats.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/4". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-1/8". Length: 50 feet.

13.5" black 3 spoke steering wheel with center trim cap.
Hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for mechanical steering.
This item is bulked packed and does not include the box.

Plastic center trim cap for SeaStar Champion
& Stealth steering wheels.

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 5/8".

Replacement control handle for Hynautic control head.
Brushed anodized aluminium.
Black synthetic knob.

Replacement control handle for Hynautic control head.
Brushed anodized aluminum.
Red synthetic knob.

Hand lever for a dual-function, single-lever control.
Sturdy, traditionally styled top-mounted handle provides one-handed engine control with excellent feel characteristics.
Start and warm-up are done by pulling out hand levers in the neutral position.
This disengages the clutch and allows throttle to be advanced in neutral.
Returning to neutral detent re-engages clutch.

For Yamaha outboard engines. Size: 5/16". Mates with tank connector. Packaged for retail display.

For Yamaha outboard engines. Size: 1/4". Mates with tank connector. Packaged for retail display.

For Yamaha outboard engines. Size: 1/4". Mates with tank connector. Packaged for retail display.

Supports steering cable at engine.
Aluminum construction.

Galvanized steel construction. Size: 1/2".

Stainless steel construction. Size: 1/2".

Servo valve block seal kit for all SeaStar power steering cylinders.
#HS5196.

Gland replacement kit includes gland, o-ring, and bleeder tee.
For HC5370 cylinder.

Replacement shaft and lever assembly for
SeaStar SR engine control.
Cast aluminum construction. 

Seal kit for Capilano HC5319, HC5350,
HC5356 and HC5373 inboard cylinders.

Seal kit for Capilano HC5318, HC5349,
HC5355, and HC5369 inboard cylinders.

Seal kit for Capilano HC5362, HC5378,
and HC5379 inboard cylinders.

Seal kit for Capilano HC5351, HC5354,
HC5357, and HC5369, inboard cylinders.

Contains replacement snap rings, O-rings and seals for cylinders with snap ring type
end glands only.
For cylinders HC5340 and HC5394.

Seal kit for all SeaStar 1.7 and 2.4 helm pumps manufactured from 1984 thru 1989.

Seal kit for SeaStar HC5303, HC5312, HC5328, HC5329, HC5330,
HC5331, HC5335, HC5338, and HC5380 steering cylinders.
125 EM MV BJ ATM.
Includes thread locker.

Seal kit for HC5370 & HC5371 cylinders.

Seal kit for SeaStar HC5314, HC5326, and HC5336 steering cylinders.
150 EM MV BJ ATM.
Includes thread locker.

Seal kit for SeaStar HC5313, HC5327, and HC5332 steering cylinders.
135 EM MV BJ ATM.
Includes thread locker.

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.
Includes seal glands, seal gland guide, O-rings & wrench.

Seal kit for Capilano HH0132 (250V), HH0217 (275V),
HH5250 (1250V), and HH5275 (1275V) helms. 

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.     
Includes seal glands, seal gland guide, and O-rings.   
Does not include wrench.