O-rings and seals. For R-4, R-10, R-13 and R-14.

Single-lever, dual action - throttle and shift.  
Sturdy control provides one-handed positive engine
control.
Neutral warm-up is done by pulling out the hand
levers in the neutral position.
Built-in friction drag helps reduce slippage and
throttle creep while underway.
Includes hardware for 33C control cables.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 26'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 28'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 24'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 20'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 15'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 14'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 16'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 10'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 13'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 12'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 18'.

Front-mount balanced cylinder for outboards.  
Designed for single/twin non-power assisted engines.  
Ultra corrosion-resistant construction.  
Rigid tilt tube mount.  
Pivoted tiller connection.  
Integral bleeding fittings.
Bore: 1.375"
Shaft diameter: .75"
Stroke: 8"
Volume: 8.34 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5157

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 3". Length: 12.5 feet.

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.25"
Shaft diameter: .50”
Stroke: 7”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports. 
Seal kit: HS5154

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 5/8".

Power assist sterndrive cylinder.
For use with specific Volvo sterndrives.  
Bore: 1.25"
Shaft diameter: .50"
Stroke: 8"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154

Shieldsflex II marine water/exhaust hose.
Black synthetic rubber tube and cover.
Reinforced with a wire helix imbedded in HD synthetic cord.
Resistant to exhaust fumes, mild chemicals, ozone, antifreeze, and saltwater.
Abrasion and odor permeation resistant.
Primarily used for engine intake, wet exhaust connections, bilge pump intake, scupper lines, toilet exchange / discharge and more.
Meets SAE J2006 type R2 standards.
Color: Black with blue stripe.
Diameter: 3-1/2".
Length: 12.5 feet.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: Black.

Clutch or throttle universal connection kit for single or dual station applications.
For use with 33C series cables.
Includes instructions.

Neutral safety switch kit for S and Twin S controls.

Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 3/8".

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4458D. Size: 5" or 6".

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4457D. Size: 4".

60 series cable clamp.
1-1/4" center to center bolt pattern.
Used with 37884 shim.
Plated steel.

Inboard balanced cylinder.
Replaced Hynautic K-19 cylinder.
Universal mount.
Cylinder equipped with swivel joints at each end.
Shaft diameter: .75"
Stroke: 9"
Volume: 9 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: KS-02

Heavy-duty rubber exhaust protecting flapper valve. Keeps water from entering exhaust outlet. Part No: 18-4456D. Size: 3".

Air pressure relief valve for R-04 & R-13 reservoirs.
Rated for 150 lb. 

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 3/4".

Dual cable clip bracket for use with 33C
throttle and shift cables.

Inboard steering cylinder for single and dual rudder
vessels.   
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.50"
Shaft diameter: .63"
Stroke: 7"
Volume: 10.2 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5156
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Eye terminal for 30C series cable.
5/16" eye, 10-32 threads.  
Aluminum construction.
Replaces Morse eye terminal  31980.

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 1/4".
50 feet per box.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/4". 250 feet per spool.