Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1-1/8".  NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Single Safe-T QC quick connect rotary steering helm.
Standard 3/4" round tapered steering shaft.
Conical plastic nut holds spent travel tube.
16" maximum steering wheel diameter , 5" maximum wheel dish.
Included in SeaStar SS137 steering system kits.
Accepts SeaStar SSC62QC steering cables and
SeaStar SB27484P or SB27483P bezel kits.

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 6'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 8'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 12'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 10'

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1/2".

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 22'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 24'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 26'

SeaStar standard outboard steering hose kit.
Includes two hoses.
For all SeaStar systems, except SeaStar PRO,
BayStar, Capilano and 3-line inboard systems.
Factory swaged fittings.
Length: 28'

Used in conjunction with BayStar and SeaStar kits.
Required on some outboard applications.
 For use with Teleflex hydraulic steering cylinder HC5345 and HC5358.

Dual connection throttle and shift connection kit. Connects two 3300 type engine control cables. Includes instructions and 14 pieces of hardware.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1-1/4".

Kink resistant and flexible. Designed with an EPDM tube and cover. Wire-reinforced with two fabric plies. Resistant to toilet chemicals, odors, salt water and heat. Primarily used for toilet to holding tank connections. Works well as a holding tank pump-out hose. Diameter: 1".

Deigned for outboard feed and vent lines. Remains flexible at low temperatures. Not for use in Type B1 applications. Diameter: 5/8".

Allows a user to manually steer an auxiliary engine
(kicker motor) using their existing SeaStar hydraulic
steering system.
Incorporates a 40 series Xtreme cable as linkage between
the two engines.
Allows independent trim/tilt and full steering stroke
of both engines.
Works with SeaStar HC5345, HC5358, HC5348, HC5345-3,
HC5358-3, & HC5348-3 steering cylinders.
Not for use with Baystar steering systems.
Simplified installation, using universal connections.
Maximum auxiliary engine horsepower: 20HP
Cable length: 44".

Clear PVC with a black vinyl helix. Abrasion, saltwater, and chemical resistant, flexible. Often used for: - Bilge pump discharge - Potable water tanks fills - Drains for sinks, showers, livewells, or scuppers. This hose uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Not for use with glycol-based antifreeze. Diameter: 1".

Heavy-duty for hot or cold water systems. Extra wall thickness increases kink resistance. FDA-approved virgin vinyl compound. Diameter: 1/2".

For use with a docking light.

33LU cable with Tee knob. Easy to install and operate. For remote control of choke, throttle, or other engine appli Solid stainless core in a non-metallic liner. Cable can be shortened to needed dimensions. Size: 30 feet. Weight: 4 lbs.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 25 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 20 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 15 feet.

SeaStar 3/8" OD nylon tubing is
recommended for inboard, sterndrive,
and SeaDrive steering systems with SeaStar
(1.7 cubic inch/rev displacement) helms only.
Length: 50'

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 5 feet.

SeaStar 3/8" OD nylon tubing is
recommended for inboard, sterndrive,
and SeaDrive steering systems with SeaStar
(1.7 cubic inch/rev displacement) helms only.
Length: 25'

Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 1/4".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-3/4". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines.
Reinforced with wire helix embedded in synthetic material. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-3/8". Length: 12.5 feet.

For use with SeaStar single cylinder outboard system. Length: 27-1/2". Includes instructions.

For pivot mount cylinders. No adapters are required.

Connects fuel line assemblies and fuel tanks. Built to OEM specifications. For Yamaha engines.

Heavy duty balanced inboard brass cylinder with chrome
plated stainless steel rods & ball joint.
Stainless steel and bronze mounting hardware.
2-axis articulation.
Bore: 2"
Shaft diameter: 1"
Stroke: 11"
Volume: 26.0 cu. in.
Seal kit: HS5185
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid. 

For Morse 100 series control systems. Diameter: 7/16".