A centrifugal booster pump. Bronze construction. 1/2" inlet and outlet. 12 volt.

Full flow. Bronze construction. Dimensions: 3" NPT to 3-1/4" hose.

Standard Flow 90 Degree King Nipple 1-1/2" NPT x 1-1/2" hose - Bronze Weight 1.12 lbs

Allows air to enter to break siphon. Does not permit air and odors to escape. Assures clog free anti-siphon protection. If used in exhaust system, overboard venting is required. Hose connection: 1-1/2".

Triangular flange base. Full flow. Side port has a quick-release plug for emergencies. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 2" NPT top and bottom ports.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1-1/4" NPT top.

NPT pipe to hose fitting.
Bronze construction.
Size: 3".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 1".

Full flow. Bronze construction. Dimensions: 2" NPT to 2" hose.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1" NPT top.

Gives structural stability in valve / thru-hole locations. Bottom port has straight threads to mate with thru-hulls. Top port has tapered threads to mate with ball valves. Use where in-line valves have been used as seacocks. Size: 2". Weight: 2.04 lbs.

Equipped with a drain plug. For use with Groco ARG-500 raw water strainer.

Magnifying cap for easy inspection Unique mounting system allows for removal without tools One piece molded sight glass eliminates tie rod and gaskets O-rings seal all mating surfaces Bond connection-both sides Monel basket Diameter: 1/2".

P-9000 rotary pump. Self-priming, positive displacement design. Bronze, stainless steel, Teflon and Delrin construction. Able to run dry. 1/2" shaft. Inlet and outlet are 3/4" NPT.

Standard Flow 90 Degree King Nipple 1/2" NPT x 1/2" or 5/8" hose - Bronze Weight .22 lbs

Full flow. Bronze construction. Dimensions: 1/2" NPT to 3/4" hose.

Bronze construction. Extra long. Thru-hull fitting with grounding nut. Diameter: 3/4".

Type 304 stainless steel.
Used with raw water strainers.
Dimensions: 3.1" X 15.5".

Type 304 stainless steel.
Used with raw water strainers.
Dimensions: 3.1" X 11.9".

An auxiliary water pump. 1" inlet and outlet. 12 volt.

Hull strainer with access door. Bronze construction. Makes it easy to access thru-hull and seacocks. Maximum thru-hull length: 2". Dimensions: 10.25" X 4.38" X 1.63".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 1-1/2".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 3/4".

Bronze construction.
Drilled top holes, cast side slots.
NPT thread: 3/4".
Overall size: 1.88" X 1.88".

Full flow. Bronze construction. Dimensions: 1-1/2" NPT to 1-1/2" hose.

Bronze construction.
Patented selectable rotating handle.
Accept standard ratchet.
400 WOG rated.
Full pipe size flow.
Stainless steel handle and hardware.
Chrome plated solid brass ball (not a hollow ball).
Bonding attachment.
PTFE seats and seals.
UL listed for fuel.
Diameter: 3/4".

For repairing the HF Master Groco toilet.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 3/4" NPT top.

Bronze construction. Patented selectable rotating handle. Accept standard ratchet. 400 WOG rated. Full pipe size flow. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). Bonding attachment. PTFE seats and seals. UL Listed for fuel. Diameter: 1-1/4".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 2" and 2-1/2" seacocks. Diameter: 7.13".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3" and 4" seacocks. Diameter: 9.5".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3/4" and 1" seacocks. Diameter: 4.29".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 1-1/4" and 1-1/2" seacocks. Diameter: 5.38".

Allows air to enter to break siphon. Does not permit air and odors to escape. Assures clog free anti-siphon protection. If used in exhaust system, overboard venting is required. Hose connection: 3/4".

EB master service kit. Includes: - Diaphragm - Gaskets - Valves - Seals - Hardware.

Bronze construction. Patented selectable rotating handle. Accept standard ratchet. 400 WOG rated. Full pipe size flow. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). Bonding attachment. PTFE seats and seals. UL Listed for fuel. Diameter: 1".