Vent cap assembly for Forespar vented loops. "Duck bill" style. Commonly used in marine toilet or engine cooling systems. Molded from corrosion-proof Marelon. Manufacturer number: 903002 MF-841.

Vented loop assembly. Commonly used in marine toilet or engine cooling systems. A valve at the top of the loop allows air to enter line when system isn't in use, but seals when fluid is present. Molded from corrosion-proof Marelon. Manufacturer number: MF 844 903007. Barb size: 1". Dimensions: 7" X 9". Weight: .8 lb.

Forespar MF 849 flange mounting seacock. Molded in high strength glass-reinforced Marelon. Strong, lightweight, and corrosion resistant. Uses a ball valve to control flow. For controlling water needs above or below the waterline. Diameter: 3/4". Weight: .4 lb.

Forespar MF 849 flange mounting seacock. Molded in high strength glass-reinforced Marelon. Strong, lightweight, and corrosion resistant. Uses a ball valve to control flow. For controlling water needs above or below the waterline. Diameter: 1/2".

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECF 24, 901010. Thread size: 1-1/2". Tailpipe/hose diameter: 1-1/2". Weight: .3 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 8, 901000. Thread size: 1/2". Tailpipe/hose diameter: 5/8". Weight: .1 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 16, 901002 Thread size: 1". Tailpipe/hose diameter: 1". Weight: .2 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 12, 901001 Thread size: 3/4". Tailpipe/hose diameter: 3/4". Weight: .15 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 24, 901004. Thread size: 1-1/2". Tailpipe/hose diameter: 1-1/2". Weight: .25 lb

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 20, 901003. Thread size: 1-1/4". Tailpipe/hose diameter: 1-1/4". Weight: .2 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECF 8, 901006. Thread size: 1/2". Tailpipe/hose diameter: 5/8". Weight: .1 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECM 32, 901005. Thread size: 2". Tailpipe/hose diameter: 2". Weight: .3 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECF 16, 901008. Thread size: 1". Tailpipe/hose diameter: 1". Weight: .2 lb.

King nipple pipe to hose connector - 90° elbow. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: HECF 12, 901007. Thread size: 3/4". Tailpipe/hose diameter: 3/4". Weight: .15 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 3" X 1-7/8". Threads: 1/2" NPT. Weight: .35 lb.

Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 2-3/4" X 4-3/4". Threads: 1" NPT. Weight: .85 lb.

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 3/4".

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 1".

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 1-1/4".

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 1/2".

King nipple pipe to hose connector. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: 905010. Thread size: 1-1/2". Tailpipe/hose diameter: 1-7/16". Weight: .12 lb.

King nipple pipe to hose connector. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: 905006. Thread size: 1/2". Tailpipe/hose diameter: 5/8" Weight: .08 lb.

King nipple pipe to hose connector. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: 905009. Thread size: 1-1/4". Tailpipe/hose diameter: 1-1/4". Weight: .1 lb.

King nipple pipe to hose connector. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: 905008. Thread size: 1". Tailpipe/hose diameter: 1". Weight: .1 lb.

King nipple pipe to hose connector. Molded from high-strength glass-reinforced Marelon. Perfect for joining hose lines to ball valves or seacocks. Manufacturer number: 905007. Thread size: 3/4". Tailpipe/hose diameter: 3/4". Weight: .08 lb.

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 1-1/8".

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 2".

Will fit all Forespar water strainers and valves. Allows you to check for flow at a glance. Standard NPSM threads. Strong, lightweight. Will not corrode or degrade. Size: 1-1/2".

Hose tailpipe threaded mushroom head thru-hull.
Features a barbed tailpipe connector.
Ideal for hose connections.
Manufacturer number: CF 253.
Size: 1-1/2".

Threaded mushroom head thru-hull.
Features a barbed tailpipe connector.
Ideal for hose connections.
Manufacturer number: 906024.
Size: 3/4".

Forespar threaded mushroom head thru-hull. Used for hose connections. Manufacturer number: 906018. Size: 1-1/2".

Forespar threaded mushroom head thru-hull. Used for hose connections. Manufacturer number: 906016. Size: 1-1/4".

High-strength scoop strainer. Cast from glass-reinforced non-corrosive Marelon. Easy to install. Thread size: 1-1/4"

Water strainer gasket set. Replacement parts for the Forespar 906066 water strainer. Manufacturer number: 906067 MF 811. Weight: .09 lb.

Forespar water strainer. Fully adjustable and repostionable universal mouting bracket Maralon, stainless steel and polycarbonate construction. Intake and exit ports are 1-1/2" ANP standard threads. Size: 6.1" X 6.3". Weight: 1.8 lbs.

Replacement lid for water strainer. Clear polycarbonate construction. The cover attaches by one screw. For use with 906066 water strainer. Diameter: 6.3". Weight: .1 lb.