Engine Brite: the world's best selling engine degreaser! A heavy duty cleaning formula. Packed with powerful solvents. Quickly, easily removes the toughest grease, dirt, and grime Size: 16 oz. Weight: .25 lb.

Red gel high-temperature threadlocker. Designed for pin-point application. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Withstands temperatures up to 450 degrees F. Size: 10 ml.

Heavy-duty hand cleaner solution. Removes the toughest grime, tar, grease, ink, and more. Leaves hands clean and smelling like a fresh orange. Designed to be tough on dirt, easy on your skin. Size: 1 gal.

Blue gel threadlocker. Easy to apply where it's needed. Locks and seals screws and nuts. Prevents loosening from vibration. No-run, no-drip formula and applicator. Medium-strength for easy disassembly with hand tools. Appropriate for vertical application. Size: 10 grams.

Fifteen-minute epoxy. Two part adhesive/filler. Can be drilled, sanded, painted, filled. Resists cleaning fluids. Size: 2 oz.

Will not foul oxygen sensors. Replaces most cut gaskets. Resists cracking, shrinking, moving. Temp: -65°F to 500°F. Resists auto/shop fluids. For engine covers, pans, housing, and pumps. Color: Clear. Size: 3 oz.

12 volt 3 position ignition switch Key removes only in Off, spring return. Electrical rating: 12 volt DC - 10A ignition/5A start. 3 brass screw terminals - chrome plated brass face nut. Brass: case/mounting hardware. Brass mount stem: 13/16"-24 long 1-7/32". Fits panels up to 1" thick. Weight: .1 lb

Rugged combination warning light and buzzer system. Universally useable with any electrical switch. LED, red lens, long life 12 volt DC. Size: 1-7/8" X 1" X 1-11/32" Weight: .1 lbs.

Marine construction PVC coated brass housing. 1 circuit - 10A at 12 volt DC 6A-36V DC. Chrome-plated brass knob 10-32 thread. 2 insulated copper wire leads, 12" long. Brass mount stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Mount hardware included. Weight: .1 lb

Heavy-duty push/pull marine construction switch. Two circuits, SPDT 10A at 12V DC. Brass housing, chrome-plated brass knob. Three screw terminals. Brass mounting stem: 3/8"-32 thread X 1-1/4". Fits panels up to 1" thick.

Red gel high-strength threadlocker. Designed for large bolts and studs, 1" or more in diameter. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Size: 36 ml.

Biodegradable, waterless, petroleum and solvent free. No harsh chemicals or ammonia to sting your hands. Pure fresh-smelling natural citrus does the cleaning. Fortified with aloe, lanolin, and glycerin conditioners. Gently cleans away the toughest dirt, odors and more. Size: 15 oz.

Terminal block with common hot feed connector. Molded plastic. Two holes for #10 countersink flathead screws, ten gangs. Size: 5-3/4" X 1.3" Mounting: Ten #8-32 screws, two 1/4-20 studs. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, six gangs. Size: 4.33" X 1.3" Mounting: Twelve #8-32 screws. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, eight gangs. Size: 5.46" X 1.3" Mounting: Sixteen #8-32 screws. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, ten gangs. Size: 6.59" X 1.3" Mounting: Twenty #8-32 screws. Weight: .1 lbs.

Knob pull switch. 20A at 12V DC 6-36V. Brass housing, 2 brass screw terminals. Chrome plated brass knob, gasket sealed case. Brass mounting stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Weight: .1 lbs.

Green penetrating-grade threadlocker. OEM specified. This low-viscosity formula can wick down assembled threads. Localized heating and tools are needed for disassembly. Size: 6 ml.

All-season windshield cleaner fluid.
For automotive and boating needs.
Size: 1 gal.

Red gel high-strength threadlocker. Designed for pin-point application. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Size: 36 ml.

Heavy-duty momentary push button switch. Two position: normally Off, push button for On. Spring return to off. Two 8-32 screw terminals, copper contacts. Chrome plated brass button, steel housing. 15A resistive, 10A inductive at 12V DC. Weight: .1 lbs.

Five-minute quick-setting epoxy. Packaged in a two-part syringe. Eliminates brazing, fills gaps, no shrinking. For metals, fiberglass, rubber, concrete, most plastics. Appropriate for temperature range of 60°F to 180°F. Once cured, has a permanent strength of 34000 PSI. Size: 25 ml.

Red gel high-strength threadlocker. Designed for pin-point application. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Size: 10 grams.

Designed for cut gaskets and stamped parts. Slow-drying, non-hardening. Resists common fluids and fuels. Easy disassembly if required. Use where sealing is more important than adhesion. Manufacturer number: 2B. Size: 3 oz.

Hard-setting sealant. Ideal for permanent assemblies. Fills in uneven surfaces. Will repair gaskets and threaded connections. Manufacturer number: 1B. Color: Brown. Size: 3 oz.

2-position marine ignition switch.
Key removable in off position only.
No spring return.
O-ring seal in stem, brass case material.
Mounting panel thickness: 1".
Ignition/Run: 10A / 12V DC.
Ignition-proof: SAE J259.
Blister packed.

High-temp, heavy-duty use. Temps: -75°F to 650°F intermittent. Manufacturer's number: 26B. Color: Red. Size: 11 oz.

Heavy duty on/off/on toggle switch. Rated for 25A at 12V DC. Plastic housing with plated steel cap. Nickel plated brass 11/16" handle and mountings. 6 screw terminals. Blister packaging. Weight: .1 lbs.

Universal continous duty solenoid. Insulated. 85A rating. Normally open, 200A carry only. Plasticized steel housing, copper contacts. Straight bracket, 5/16" X 19/32" holes. Weight: .1 lbs.

Rugged combination warning light and buzzer system. Universally useable with any electrical switch. LED, red lens, long life 12 volt DC. Size: 1-7/8" X 1" X 1-11/32" Weight: .1 lbs. Blister packaging.

Fast-curing, sensor-safe, low-odor and noncorrosive. OE silicone spec. High-flexibility, oil-resistant. Use on covers, pans, seals, engine. Covers a temperature range of 75°F to 650°F. Size: 3.35 oz.

Boot For toggle switch protection. Allows any length handle to protrude. Seals tightly to handle. Suitable for all Cole Hersee toggle switches. Blister packaged.