Engine Brite: the world's best selling engine degreaser! A heavy duty cleaning formula. Packed with powerful solvents. Quickly, easily removes the toughest grease, dirt, and grime Size: 16 oz. Weight: .25 lb.

Red gel high-temperature threadlocker. Designed for pin-point application. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Withstands temperatures up to 450 degrees F. Size: 10 ml.

Heavy-duty hand cleaner solution. Removes the toughest grime, tar, grease, ink, and more. Leaves hands clean and smelling like a fresh orange. Designed to be tough on dirt, easy on your skin. Size: 1 gal.

Blue gel threadlocker. Easy to apply where it's needed. Locks and seals screws and nuts. Prevents loosening from vibration. No-run, no-drip formula and applicator. Medium-strength for easy disassembly with hand tools. Appropriate for vertical application. Size: 10 grams.

Fifteen-minute epoxy. Two part adhesive/filler. Can be drilled, sanded, painted, filled. Resists cleaning fluids. Size: 2 oz.

Will not foul oxygen sensors. Replaces most cut gaskets. Resists cracking, shrinking, moving. Temp: -65°F to 500°F. Resists auto/shop fluids. For engine covers, pans, housing, and pumps. Color: Clear. Size: 3 oz.

12 volt 3 position ignition switch Key removes only in Off, spring return. Electrical rating: 12 volt DC - 10A ignition/5A start. 3 brass screw terminals - chrome plated brass face nut. Brass: case/mounting hardware. Brass mount stem: 13/16"-24 long 1-7/32". Fits panels up to 1" thick. Weight: .1 lb

Rugged combination warning light and buzzer system. Universally useable with any electrical switch. LED, red lens, long life 12 volt DC. Size: 1-7/8" X 1" X 1-11/32" Weight: .1 lbs.

Marine construction PVC coated brass housing. 1 circuit - 10A at 12 volt DC 6A-36V DC. Chrome-plated brass knob 10-32 thread. 2 insulated copper wire leads, 12" long. Brass mount stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Mount hardware included. Weight: .1 lb

Heavy-duty push/pull marine construction switch. Two circuits, SPDT 10A at 12V DC. Brass housing, chrome-plated brass knob. Three screw terminals. Brass mounting stem: 3/8"-32 thread X 1-1/4". Fits panels up to 1" thick.

Red gel high-strength threadlocker. Designed for large bolts and studs, 1" or more in diameter. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Size: 36 ml.

Biodegradable, waterless, petroleum and solvent free. No harsh chemicals or ammonia to sting your hands. Pure fresh-smelling natural citrus does the cleaning. Fortified with aloe, lanolin, and glycerin conditioners. Gently cleans away the toughest dirt, odors and more. Size: 15 oz.

Terminal block with common hot feed connector. Molded plastic. Two holes for #10 countersink flathead screws, ten gangs. Size: 5-3/4" X 1.3" Mounting: Ten #8-32 screws, two 1/4-20 studs. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, six gangs. Size: 4.33" X 1.3" Mounting: Twelve #8-32 screws. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, eight gangs. Size: 5.46" X 1.3" Mounting: Sixteen #8-32 screws. Weight: .1 lbs.

Terminal block with independent hot feed connector. Molded plastic with protective insulator barrier strips. Four 0.220" mounting holes, ten gangs. Size: 6.59" X 1.3" Mounting: Twenty #8-32 screws. Weight: .1 lbs.

Knob pull switch. 20A at 12V DC 6-36V. Brass housing, 2 brass screw terminals. Chrome plated brass knob, gasket sealed case. Brass mounting stem: 3/8"-32 thread 1-1/4" long. Fits panels up to 3/4" thick. Weight: .1 lbs.

Heavy-duty push/pull switch with marine construction. Rated at 10A at 12V DC. Three position: Off, On-1, On-2. Three brass screw terminals. Fits panels up to 1" thick. Weight: .1 lbs.

Aerosol adhesive sealant. For all gaskets and flanges. Great for threaded fittings, hose connections and more. Size: 9 oz.

Biodegradable, waterless, petroleum and solvent free. No harsh chemicals or ammonia to sting your hands. Pure fresh-smelling natural citrus does the cleaning. Fortified with aloe, lanolin, and glycerin conditioners. Gently cleans away the toughest dirt, odors and more. Smooth texture. Size: 7.5 oz.

Allows user to quickly check both AC and DC current. Tests up to 28 volts with the power on. Helps locate shorts or breaks in wiring. Complete with insulated grounding clip.

Blue threadlocker Easy to apply where it's needed. Locks and seals screws and nuts. Prevents loosening from vibration. Medium-strength for easy disassembly with hand tools. Appropriate for vertical application. Size: 36 ml.

Activator for anaerobics. Increases strength of threadlocker adhesive. Speeds curing as much as 50%, Useful in cold weather as a general-purpose solvent. For cleaning surfaces and preparing parts, nuts, and more. Size: 4.5 oz.

Fast-drying, metallic copper aerosol sealant. Helps dissipate heat and fill surface irregularities. Resists all types of petrochemicals. Temperature range -50°F to 500°F. Size: 12 oz.

Heavy duty on/off/on toggle switch. Rated for 25A at 12V DC. Plastic housing with plated steel cap. Nickel plated brass 11/16" handle and mountings. 6 screw terminals. Weight: .1 lbs.

Allows switching between either of two batteries or both. Rated for 500 amps intermittent, 310 amps continuous. Heavy duty construction.

General-purpose epoxy adhesive. Packaged in a syringe for easy mixing. Designed to bond dissimilar materials. Fills gaps and will not shrink. Sets in five minutes. Dries clear. Size: 1 oz.

Locks and seals threaded fittings. Resists leakage, vibration, moisture, engine fluids. Easy assembly/disassembly. Repositionable for up to 4 hours. Use on PSI sending units, fittings, brakes, steering. Size: 6 ml.