Vinyl-coated steel wire construction.
Built-in bait cage.
Large side and top opening hatches.
Three ramp entrances.
Stretch tube and hook closures.
Two escape rings for smaller crabs.
Dimensions: 30" X 30" X 12".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Standard baseball cap. Waxed fabric for a water-resistant head covering. Features a Seattle Marine logo. Color: Brown.

100% Thinsulate acrylic.
Rib-knit. Insulates your head in cold weather.
One size fits most.
Color: Heather gray.

Easy to clean, resists chemicals, fats, oils. Meets FDA regulations for food contact. 1.5 mil thick. Dimensions: 28" X 46". Color: Blue. 100 per dispenser.

Sewn from 6.75 ounce 99% cotton jersey knit fabric. Features a rib-knit collar and a left chest pocket. Color: Port. Size: Double extra large.

Strong, lightweight monofilament rope. Excellent resistance to oil, rot, and chemicals. Good abrasion and UV resistance. Twice the tensile strength of manila rope. Color: Black. Diameter: 1". Tensile strength: 12,825 lb. Length: 600 ft.

Provides strong multi-season performance.
Powerful dual biocide for protection under all conditions.
Gives the benefits of both hard and ablative paints.
For fiberglass, wood or aluminum hulls.
Dries to a burnishable racing finish.
Hard, smooth surface is exvellent for trailered boats.
Contains 25% cuprous thiocyanate and 2.8% zinc pyrithione.
Color: White.
Size: 1 gal.

Inflates a four-man dinghy in 1-2 minutes. Supplied with an adaptor for all major boats. Reversible, will deflate dinghies flat. Single-handed operation. Rated for 550 liters / minute.

White funnel for transmission oil. For use with InstaTrim boat leveler systems. Weight: .04 lb.

Standard alarm bell. Produces a classic loud clanging alarm. Weatherpoof enamel and stainless steel construction. Ideal for marine environments. Easily connected to existing 32 volt systems. Color: red. Size: 6" diameter. Weight: 3 lbs.

Provides respiratory protection against non-oil particles. Economical and useful for job sites. Has nose foam and adjustable nose clip. Features a CoolFlow one-way valve for comfort. Great for all-day use, especially in warm situations. Standard size. 10 per box.

About 40% stronger than polypropylene / polyethylene.
Excellent UV resistance.
Superior abrasion resistance.
Resists rot and mildew.
Color: Orange and green.
Diameter: 3/4".
Length: 1200 feet.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Watertight, crushproof and dustproof. Automatic pressure equalization valve. O-ring seal. 2 level Pick'n'Pluck foam for a custom fit. Convoluted lid foam. 1 front and 2 side folding handles. 1 extendable handle. 2 exterior mounted urethane wheels. Interior dimensions: 21.37" X 16.31" X 12.56". Maximum buoyancy: 149.91 lb Color: Black.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Double braided nylon for flexibility and shock absorption.
Professionally spliced soft eye at one end.
Yacht whipped at the bitter end and splice point.
Working load: 960 lbs.
Breaking strength: 4400 lbs.
1/2" diameter, 25 feet long.
Color: Gold

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: 7040 Gray. Size: 1 gal. Weight: 14 lbs.

Nitrile. 6 blades. Diameter: 2".

Designed to give a consistent scratch pattern.

Heavy, "F-weight" paper backing resists tearing.
Resin-bonded aluminum oxide grit.
Easily handles heavy sanding on all wood.

Grit: 60.
Size: 5".

50 discs per box.

Ultra Blue polyolefin-polyester blend fiber.
Medium hard lay minimizes hockling.
Consistent polyester covering over yarns promotes long life.
A long-wearing sinking line.
3-strand, class I splice.
Resists abrasion.
Tensile strength: 3,500 lb.
Size: 3/8".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Classic paring knife with a straight edge.
Stainless steel.
Red handle, polypropylene. 

Blade is 3-1/4". 

Single crimp butt connectors. Nylon insulated, tinned copper terminals. Wire size: 22-18 gauge. 100 per pack. Weight: .24 lb.

Capable of charging two devices simultaneously.
Total output: 4.8 amps.
Protective dust cap extends the life of the charger.
Aluminum / injection molded nylon.
Red anodized finish.

General purpose chain. Standard commercial quality chain. Low-carbon steel. Galvanized and proof tested. 150 feet per drum. Diameter: 3/4". Working load limit: 6900 lbs. Weight: 5.36 lbs. per foot.

Fulton Industries portable sternlight. White light. Operates on two "D" cell batteries. Includes simple bracket. Weight: .3 lb.

Immersion suit donning instructions.
Printed on flexible vinyl material with a high-tack adhesive backing.
Part number: LC1037G.
Poster size: 10" X 14".

China bristles with a hand-formed extra-fine chisel tip. Black laquered hardwood handle. Stainless steel ferrule. Good for top-side enamels and urethanes. Size: 1-1/2".

Heat-activated adhesive built into each sleeve.
When heated correctly, forms a watertight seal.
Size: 16-14.
25 per package.

Nylon insulated disconnect terminals. Features double crimping and a funnel entry. Wire range: 12-10. 100 per pack. Weight: .45 lb.

Stainless steel.
Diameter: 3/8".
Ring opening: 1-1/2".
Mounts with four 1/4" FH fasteners.

Single spool gurdy valve. 4-way, 3 position control valve. Mounts directly on manifold (non-threaded) ported motors. Usable with Charlynn Gurdy motors 101-1019, 1021, 1022. Complete with stainless steel mounting hardware and O-rings. Weight: 6.81 lbs.

20 AMP Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits Weight: .1 lb