Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
S2K Commerce - Products Dropdown
Actions
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
S2K Commerce - Order Entry
Actions
Low oil pressure detector
Low oil pressure detector.
Two terminal normally closed switch that opens at 10 PSI and closes when pressure falls below 10 PSI.
1/8" MPT base.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL202
Manufacturer:
Aqualarm
Available:
In Stock
35.2400
Your Price:
28.19
EACH
Water flow detector - 1"
1" FPT paddle type detector monitors raw water flow and activates an boat alarm (not included) to prevent engine damage due to overheating.
Works with 1" and 1-1/4" raw water hoses.
Normally closed two wire, non-polarity switch that opens with flow and closes if you loose flow.
Note: a flow rate of 3 to 4 GPM is needed for proper performance.
For smaller engines with lower flow rates, refer to AquaAlarm 13209.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL210
Manufacturer:
Aqualarm
Available:
In Stock
140.9400
Your Price:
112.75
EACH
Bolt-on engine overheat sensor
Two terminal, non-polar, normally open.
Engine overheat detector that closes when engine temperature reaches 200°F and then activates a visual and/or audible alarm.
Bolts on the engine block or engine head using the engine or head bolts.
Multi-voltage, for 12, 24, and 32 volt systems.
Engine overheat detector that closes when engine temperature reaches 200°F and then activates a visual and/or audible alarm.
Bolts on the engine block or engine head using the engine or head bolts.
Multi-voltage, for 12, 24, and 32 volt systems.
Item#:
AQL212
Manufacturer:
Aqualarm
Available:
In Stock
39.9300
Your Price:
31.95
EACH
Automatic alarm system kit
Twin engine 12 volt vessel monitoring system with indicator panel, PC board, & detectors.
Includes the following detectors: low oil pressure, fire, engine temperature, high bilge water, cooling water flow, and bell.
This marine alarm system is completely automatic, no switches to set; just start your engine and go.
If the systems alarms, the loud bell alerts to trouble and the easy-to-read warning lights indicates which detector is activated.
Panel includes a mute button.
Panel size: 4"W x 6"H x 2-3/4"D.
Item#:
AQLASM12-T
Manufacturer:
Aqualarm
Available:
In Stock
703.5300
Your Price:
562.82
EACH
2-1/2" MPT large capacity cooling water flow detector.
Paddle type detector monitors raw water flow and activates a boat alarm (not included) to prevent engine damage due to overheating.
Normally closed two wire, non-polar switch that opens with flow and closes if you loose flow.
This detectors work with flexible hose or rigid plumbing.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL13111
Manufacturer:
Aqualarm
Available:
Out of Stock
124.5000
Your Price:
99.60
EACH
Call to Order
Remote fire detector (UL and ULC listed) and warning panel.
Monitors heat level and activates the red light on the warning panel and sounds a loud buzzer, built into the panel, when the temperature reaches 135° F or rate of rise is reached.
Multiple remote fire detectors can be wired in parallel on this boat fire alarm.
Fire alarm panel size 1-3/4"H x 3"W.
Voltage: 12V DC.
Item#:
AQL20230
Manufacturer:
Aqualarm
Available:
Out of Stock
116.2800
Your Price:
93.02
EACH
Call to Order
Panel for engine exhaust alarm
Replacement panel for single engine exhaust alarm kit. Green light indicates power, red light indicates overheat. Monitors exhaust temperature and activates alarm at 200 F. Helps prevent serious damage to your marine engine. For 12 volt electrical systems. Weight: 1 lb.
Item#:
AQL20251
Manufacturer:
Aqualarm
Available:
In Stock
41.1100
Your Price:
32.89
EACH
Includes one panel and one bell.
Simple switch activates a loud bell in an emergency.
Panel measures 3" X 2".
12 volt.
Simple switch activates a loud bell in an emergency.
Panel measures 3" X 2".
12 volt.
Item#:
AQL20381
Manufacturer:
Aqualarm
Available:
In Stock
104.5300
Your Price:
83.62
EACH
4 compartment bilge warning panel only.
Shows which compartment has a high water condition by activating a red warning light and a loud panel mounted piezo buzzer.
It can be used with any bilge switch, sensor, or detector.
Panel includes a mute button.
Panel size: 3-5/16"W x 3-3/4"H.
Voltage: 12V DC.
Item#:
AQL20362
Manufacturer:
Aqualarm
Available:
Out of Stock
75.1700
Your Price:
60.13
EACH
Call to Order
Bilge water warning panel
6 compartment bilge warning panel only.
Shows which compartment has a high water condition by activating a red warning light and a loud panel mounted piezo buzzer.
It can be used with any bilge switch, sensor, or detector.
Panel includes a mute button.
Panel size: 3-5/16"W x 4-5/8"H.
Voltage: 12V DC.
Item#:
AQL20364
Manufacturer:
Aqualarm
Available:
Out of Stock
85.7400
Your Price:
68.59
EACH
Call to Order
Automatic alarm system kit
Single engine 32 volt vessel monitoring system with indicator panel, PC board, & detectors.
Includes the following detectors: low oil pressure, fire, engine temperature, high bilge water, cooling water flow, and bell.
This marine alarm system is completely automatic, no switches to set; just start your engine and go.
If the systems alarms, the loud bell alerts to trouble and the easy-to-read warning lights indicates which detector is activated.
Panel includes a mute button.
Panel size: 4"W x 6"H x 2-3/4"D.
Item#:
AQLASM32-S
Manufacturer:
Aqualarm
Available:
In Stock
421.6500
Your Price:
337.32
EACH
Voltage converter
Voltage converter. 24 volt and 32 volt power conversion in a small wire assembly. Part number 29214. Weight: .1 lb.
Item#:
AQL29214
Manufacturer:
Aqualarm
Available:
In Stock
11.6900
Your Price:
9.35
EACH
Bilge level warning system
Bilge water level warning system. Uses a loud bell and red panel light to signal "High Water." Includes bell, bilge water level detector, and warning light Easily connected to 32 volt marine systems. Weight: 3 lbs.
Item#:
AQLRBWS-32
Manufacturer:
Aqualarm
Available:
In Stock
135.0700
Your Price:
108.05
EACH
Bilge level warning system
Bilge water level warning system.
Uses a loud bell and red panel light to signal "High Water."
Includes bell, bilge water level detector, and warning light.
Easily connected to 12 volt marine systems.
Uses a loud bell and red panel light to signal "High Water."
Includes bell, bilge water level detector, and warning light.
Easily connected to 12 volt marine systems.
Item#:
AQLRBWS-12
Manufacturer:
Aqualarm
Available:
In Stock
131.5400
Your Price:
105.24
EACH
PC control board - 12 volt
PC control board. Interface for detectors with indicator panels or alarms. Required to create alarm circuits. Item number 20020. For 12 volt systems. Weight: 1 lb.
Item#:
AQL851
Manufacturer:
Aqualarm
Available:
In Stock
136.1900
Your Price:
108.95
EACH
Standard alarm bell - 32 volt
Standard alarm bell. Produces a classic loud clanging alarm. Weatherpoof enamel and stainless steel construction. Ideal for marine environments. Easily connected to existing 32 volt systems. Color: red. Size: 6" diameter. Weight: 3 lbs.
Item#:
AQLRBA-32
Manufacturer:
Aqualarm
Available:
In Stock
93.9600
Your Price:
75.17
EACH
3/4" MPT cooling water flow detector is designed to be inserted into an adapter or it can also be drilled and tapped into a ridged nipple or plumbing.
Monitors raw water flow and the paddle design is ideal for easy operation and it resists debris build-up.
Activates a visual or audible device immediately whenever raw water flow is stopped or impeded.
Two wire, non-polarity switch that is normally closed and opens at 3-4 GPM of raw water flow.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL10235
Manufacturer:
Aqualarm
Available:
Out of Stock
104.5300
Your Price:
83.62
EACH
Call to Order
Weatherproof marine design.
Impact resistant construction.
60,000 candle power brightness.
Operates at 12 volts DC, draws 115 mA.
Color: Amber.
Dimensions: 3-3/4" X 2-7/8".
Impact resistant construction.
60,000 candle power brightness.
Operates at 12 volts DC, draws 115 mA.
Color: Amber.
Dimensions: 3-3/4" X 2-7/8".
Item#:
AQL70035
Manufacturer:
Aqualarm
Available:
In Stock
61.0700
Your Price:
48.86
EACH
Includes panel and bell.
Simple on/off switch.
Panel measures 3" X 2".
24 volt.
Simple on/off switch.
Panel measures 3" X 2".
24 volt.
Item#:
AQL20381-24
Manufacturer:
Aqualarm
Available:
Out of Stock
104.5300
Your Price:
83.62
EACH
Call to Order
12 volt bilge pump switch
Automatic bilge pump system. Sensor-activated bilge pumping system. Switches bilge pumps on and off. Pumps until job is done, then for 15 seconds to clear line. Warning light indicates when pumping is excessive. Handles pumps up to 30 amps. Easily connected with existing 12 volt systems. Weight: .5 lbs.
Item#:
AQL20035
Manufacturer:
Aqualarm
Available:
In Stock
104.5300
Your Price:
83.62
EACH
Bilge pump counter system
Electronically counts number of times bilge pump switches.
Bright LED digital readout (four digits to 9999) with reset retains count until reset; even when powered off.
Can be used with any type of pump.
Panel size 3"W x 2-1/2"H x 1-3/4"D.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL20045
Manufacturer:
Aqualarm
Available:
In Stock
93.9100
Your Price:
75.13
EACH
A "Helmsman Minder" alarm unit.
Displays a LED countdown of time.
Key lockout for security.
Set the clock up to 99 minutes, and if the reset button is not pushed, a loud buzzer will sound.
Then, if the buzzer is not stopped, it can send an additional alert to a secondary system.
Dimensions: 5.2" X 3.2" X 2".
Displays a LED countdown of time.
Key lockout for security.
Set the clock up to 99 minutes, and if the reset button is not pushed, a loud buzzer will sound.
Then, if the buzzer is not stopped, it can send an additional alert to a secondary system.
Dimensions: 5.2" X 3.2" X 2".
Item#:
AQL20011
Manufacturer:
Aqualarm
Available:
In Stock
270.1400
Your Price:
216.11
EACH
Cooling water flow detector
2" FPT cooling water flow detector monitors water flow to prevent engine damage due to overheating.
Two wire, non-polar switch that is normally closed and opens at 8 to 10 GPM of raw water flow.
Activates a visual or audible device (not included) immediately whenever raw water flow is stopped or impeded.
AquaAlarm cooling water flow detector is unique in the marine electronic industry, developed and patented specifically for marine engines.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL200
Manufacturer:
Aqualarm
Available:
In Stock
152.6900
Your Price:
122.15
EACH
Water detector sensor - 1-1/2"
1-1/2" FPT cooling water flow detector monitors water flow to prevent engine damage due to overheating.
Two wire, non-polar switch that is normally closed and opens at 6 to 8 GPM of raw water flow.
Activates a visual or audible device (not included) immediately whenever raw water flow is stopped or impeded.
AquaAlarm cooling water flow detector is unique in the marine electronic industry, developed and patented specifically for marine engines.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL206
Manufacturer:
Aqualarm
Available:
In Stock
140.9400
Your Price:
112.75
EACH
Remote fire detector - 135 F
Remote fire detector sensor. Activates at 135 degrees F. Compact size, easy two wire installation. Size: 2-1/2" diameter.
Item#:
AQL204
Manufacturer:
Aqualarm
Available:
In Stock
86.1300
Your Price:
68.90
EACH
Automatic alarm system kit
Single engine 12 volt vessel monitoring system with indicator panel, PC board, & detectors.
Includes the following detectors: low oil pressure, fire, engine temperature, high bilge water, cooling water flow, and bell.
This marine alarm system is completely automatic, no switches to set; just start your engine and go.
If the systems alarms, the loud bell alerts to trouble and the easy-to-read warning lights indicates which detector is activated.
Panel includes a mute button.
Panel size: 4"W x 6"H x 2-3/4"D.
Item#:
AQLASM12-S
Manufacturer:
Aqualarm
Available:
In Stock
421.6500
Your Price:
337.32
EACH
Aqualarm 12 volt alarm siren
Alarm siren. Creates loud 125 decibel siren tones. Six selectable tone choices. Weather proof housing. Can be used with any detector. Weight: 2 lbs.
Item#:
AQLEA-12A
Manufacturer:
Aqualarm
Available:
In Stock
65.7700
Your Price:
52.62
EACH
Engine exhaust alarm kit
Single engine exhaust alarm kit. Includes wet overheat detector, sensors, and wiring kit. Monitors exhaust temperature and activates alarm at 200 F. Helps prevent serious damage to your marine engine. For 12 volt electrical systems. Weight: 1 lb.
Item#:
AQL20245
Manufacturer:
Aqualarm
Available:
In Stock
93.9100
Your Price:
75.13
EACH
Fire detector
Remote fire detection unit - 135°. Measures a combination of temperature and rate of rise. Normally open contacts. Compatible with any Aqualarm fire panel. Diameter: 4". Height: 1-3/4". Weight: 1 lb.
Item#:
AQL20512
Manufacturer:
Aqualarm
Available:
In Stock
70.4700
Your Price:
56.38
EACH
Fire detector
Remote fire detection unit - 194°. Measures a combination of temperature and rate of rise. Normally open contacts. Compatible with any Aqualarm fire panel. Diameter: 4". Height: 1-3/4".
Item#:
AQL20514
Manufacturer:
Aqualarm
Available:
In Stock
74.3900
Your Price:
59.51
EACH
Alarm visual indicator panel
Alarm system monitoring visual indicator panel. Five lights, with 10" connector cable. Includes wiring instructions/diagram. For use with single engine systems. Size: 3-1/2" X 4-5/8". Weight: 1 lb.
Item#:
AQL852
Manufacturer:
Aqualarm
Available:
In Stock
44.6300
Your Price:
35.70
EACH
Piezo alarm buzzer
Piezo alarm buzzer. Creates a loud 85 decibel buzzing tone. Compact design, can be used with any detector. Can be mounted flush on many surfaces. Available for 12, 24, or 32 volt systems. Weight: 2 lbs.
Item#:
AQLEA-12
Manufacturer:
Aqualarm
Available:
In Stock
34.0600
Your Price:
27.25
EACH
Screw engine overheat sensor
Two terminal, non-polar, normally open engine overheat detector that closes when boat engine temperature reaches 200°F and then activates a visual and/or audible boat alarm device.
1/2" MPT.
Multi-voltage, for 12V, 24V, & 32V systems.
Item#:
AQL212A
Manufacturer:
Aqualarm
Available:
In Stock
46.9300
Your Price:
37.54
EACH
Remote fire detector - 190 F
Remote fire detector sensor. Activates at 190 degrees F. Compact size, easy two wire installation. Size: 2-1/2" diameter.
Item#:
AQL204A
Manufacturer:
Aqualarm
Available:
In Stock
86.1300
Your Price:
68.90
EACH
Bilge water level detector
Bilge water level detector. Sensor detects when water rises. Detector is able to activate visual/audio alarm. Designed to work with 12, 24, or 32 volt systems. Does not switch bilge pump on or off. Weight: .2 lbs.
Item#:
AQL208A
Manufacturer:
Aqualarm
Available:
In Stock
55.2000
Your Price:
44.16
EACH
Standard alarm bell - 12 volt
Standard alarm bell. Produces a classic loud clanging alarm. Weatherpoof enamel and stainless steel construction. Ideal for marine environments. Easily connected to existing 12 volt systems. Color: red. Size: 6" diameter. Weight: 3 lbs.
Item#:
AQLRBA-12
Manufacturer:
Aqualarm
Available:
In Stock
88.0900
Your Price:
70.47
EACH