Galvanized steel pin and bolt. Bail size: 5/8". Working load limit: 6500 lb.

Molybdenum alloy tool steel edge. Tough flexible high carbon steel backing. Lasts twice as long as high-speed steel. Lasts up to ten times longer than carbon steel. Operates 20% to 50% faster. Tough flexible high carbon steel backing. Length: 12". 18 teeth per inch. Two per pack.

Steel spring. For pliers: NN54, NN55.

Standard tips. Compound action for powerful non-slip locking grip. Nickel-plated finish resists rust and corrosion. Red plastisol dip on release lever for improved comfort. Length: 6".

Galvanized steel pin and bolt. Bail size: 3/4". Working load limit: 9500 lb.

7/8".
Rated for 1200 lb. working load.

Galvanized steel. #3. Thickness: 3/8". 1/2" thread. Working load limit: 2250 lb.

5/8".
Rated for 5200 lb. working load.
3/4" thread.

Galvanized steel. #2. Thickness: 5/16". 3/8" thread. Working load limit: 1250 lb.

Alloy steel pliers with spring action. Great for removing pin bones. Green cushioned grip.

Green cushion grip handle. 
Serrated jaw. 
1-11/16" jaw length. 
Length: 5-1/2".

Aluminum construction. 3 feet long. Easy-to-read yellow with black markings.

Used to file slots, keyways, or surfaces. Double cut. Tapered slightly toward point. Length: 6".

GearWrench combination ratcheting wrench set. Standard, with Flex-heads. Tilts up to 180 degrees 7 pieces. sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4". Weight: 1.5 lbs.

For #29 hooks. Includes: - Spring spacer - Bolt and nut - Latch.

Features a large knurl for a tight jaw fit.
Wide handle helps reduce fatigue and improve comfort.
Chrome-plated finish wipes clean and resists rust and corrosion.
Full jaw capacity: 1-1/8".
Length: 8".

Galvanized steel pin and bolt.
Bail size: 3/8".
Working load limit: 2000 lb.

High visibility orange, high impact case. Easy-to-read yellow blade. Open, four-arm frame design protects blade. Blade width: 1/2". Length: 100'.

Diagonal solid joint cutters. Ideal for close trimming on injection molded plastic parts. Flush ground, oval shaped jaws with fine point. Designed for use in confined areas. Handle coil springs reduce user fatigue. Polished head. Length: 5". Weight: .3 lb.

Galvanized steel. Size: 3/8". Working load limit: 5400 lb.

General purpose chain. Standard commercial quality chain. Low-carbon steel. Galvanized and proof tested. 150 feet per drum. Diameter: 3/4". Working load limit: 6900 lbs. Weight: 5.36 lbs. per foot.

Double-ended snap. Die cast zinc, nickel plated. Size: 4-5/8" Weight: .1 lb

For wood and general yard work. Cuts in both directions. Length: 12".

Galvanized steel pin and bolt. Bail size: 1/2". Working load limit: 4000 lb.

Permabond construction between head and handle. Designed for increased comfort and reduced fatigue. Factory balanced for maximum striking power. Black cushion grip around contoured handle. 16 oz. head. 13" overall length.

Kit contains: - Conical soldering tip - Rope cutting tip - Smoothing tip - Foam cutting tip - Scoring tip.

Rectangular with a slight taper. Double cut on both sides. Single cut on edges. Length: 4".

Galvanized steel. 
Size: 1/2". 
Working load limit: 9200 lb. 

Designed to pivot in two directions.
72-tooth ratcheting mechanism gives a 5° swing arc.
Anodized aluminum finish.
Drive size: 3/8".

Flex head for multi-angle, multi-application use. Compact head design for fitting in small areas. Recessed reversing lever has On/Off markings for safety. Designed to reduce fatigue and for durability. Size: 3/8". Length: 9-1/2".

Generates additional torque with less effort. Compact head design for fitting in small areas. Recessed reversing lever has On/Off markings for safety. Designed to reduce fatigue and for durability. Size: 3/8". Length: 7-3/8".

For #24 hooks. Includes: - Spring spacer - Bolt and nut - Latch.

Knurled shaft provides a non-slip grip. Size: 3/8". Length: 8".

Knurled shaft provides a non-slip grip. Size: 3/8". Length: 6".