Female tank connector with male.
1/4" NPT.
Resin material.

Replacement filter element.
5 micron.
Appropriate for drinking water.

Racor fuel filter / water separator turbine with three-stage filtration.
Provides maximum protection of diesel engine components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
See-through bowl.
2 micron element included.
Max flow rate: 90 GPH.
Port size: 5/8" ORB.
Replacement element: 2040N series.
 
Dimensions: 16.5"H X 5.96"W X 5.96"D.

Surface-mounted audio/visual alarm. Buzzer and red light activates when water is detected. Does not have "mute alarm" option. Buzzer sounds until water is drained from fuel filter bowl.

Spin-on filter. Dimensions: 9-19/32" X 4-21/32"

Secondary fuel filter, spin-on.
Fits: Case consolidated Diesel Cummins engines; Komatsu equipment.

2 micron. For secondary (final) filtration. Includes seals.

Replacement element for the Racor 025-RAC-02 filter assembly.
Includes required seals for replacement.
Filter rating 10 micron.
Racor S-2502.

Built to strict OEM standards. Designed for use with Yamaha outboard systems. Attaches to the fuel hose on the engine side. Size: 5/16".

Designed to absorb angular prop thrust loads. 
Heavy-duty aluminum casting. 
Oil and fuel resistant elastomer element. 
Comes complete with nuts and washers. 

Kit includes:
- Clear bowl
- Replacement gasket
- 1/2" SAE plug.

Includes O-rings and bowl plug Use with model 500MA Weight: .5 lb

Water/fuel separator cartridge. For Racor FBO 10. 10 micron. Dimensions: 9.93" X 6".

Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines. Includes a bracket for mounting.

Protects your engine from wear particles that can otherwise lead to premature parts failure.

Spin-on design.

#8 MORB X #10 MJIC.

For OMC outboard engines. Size: 5/16". Mates with tank connector. Packaged for retail display.

Connects fuel line assemblies and fuel tanks. Built to OEM specifications. For Evinrude engines.

For OMC outboard engines. Size: 3/8". Mates with tank connector. Packaged for retail display.

Water-absorbing fuel storage tank element.
Absorbs up to 3 ounces of water over life span of filter.
Flow rate: 25 GPM pumped, 10 GPM gravity fed.
15 micron.
1-1/8" mounting stud.
Length: 4-7/8".

Spin-on fuel filter / water separator assembly. For gasoline fuel only. Flow rate: 30 GPH. Uses Aquabloc II filter element, 10 micron. Has a see-through bowl with a drain. Dimensions: 6-1/2" tall, 3-1/4" diameter.

Connects fuel line assemblies and fuel tanks. Built to OEM specifications. For Yamaha engines.

Outside diameter: 3-11/16".
A full-flow lubricant filter unit.
Thread: 3/4" - 16.
#BT216.
Compatible with Perkins 2654403.

For Yamaha outboard engines. Size: 5/16". Mates with tank connector. Packaged for retail display.

For Yamaha outboard engines. Size: 1/4". Mates with tank connector. Packaged for retail display.

For Yamaha outboard engines. Size: 1/4". Mates with tank connector. Packaged for retail display.

For 900/1000.
Coverts older models to meet the new ABS rules.
Part number: RK11734.

Racor fuel filter / water separator turbine
with three-stage filtration.
UL-approved.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
Equipped with see-through bowl with metal heat
shield.
2 micron element included.
Maximum flow rate: 90 GPH.
Port size: 5/8" MJIC.
Replacement element: 2040N series.
Dimensions: 16.2"H X 5.96"W X 6.76"D.

Engineered to repel water and remove contaminates. A secondary filter for 900 series turbine assemblies. Filter is 10 microns.

A high-efficiency spin-on filter for oil.
Designed to keep contaminants away from critical parts.
Highly durable and reliable.
Replaces a Caterpillar 1R1808 filter.
Thread: 1-1/2".
Length: 12-3/32".
9.8 micron rating.

Features: - 2 micron element - See-through bowl - Primber bulb. Not recommended for gas applications. (This model does not have a probe).

T-handle vacuum gauge fitting. Size: 1/4" NPT threads to 9/16"-18 UNF. For use with Racor vacuum gauge. Part number: 11-1668. Weight: .25 lb.

For use with 900/1000 turbine series filters. Includes O-ring.

Racor gasoline / water seperator unit.
Features a reusable see-through bowl with a self-venting drain.
Size: 10 microns.
Designed specifically for Mercury / MerCruiser outboard applications.