Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
{}
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Reserved for Web Administrator
Seattle, WA 98199
*Click to change your account
Switching Accounts
Are you sure you want to switch accounts?
Switching Accounts
Switching accounts in the middle of an order will clear your current cart. Are you sure you want to switch accounts?
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
/contenthandler/!ut/p/digest!_HZ0ZGr_2cswIaZ6JLEorw/pm/oid:--portletwindowid--@oid:Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
/contenthandler/!ut/p/digest!_HZ0ZGr_2cswIaZ6JLEorw/um/secure/currentuser/profile?expandRefs=true
- Accessories
- Buoys & Floats
- Closeout
- Clothing
- Electrical
- Engine & Steering
- Fishing Gear
- Hardware
- Hydraulics
- Knives & Cutlery
- Maintenance
- Netting
- Paints & Solvents
- Plumbing
- Rope, Line & Twine
- Safety
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
KIT GIT ROT PINT
Git-Rot liquid epoxy kit
Item #:
BTL1064
UPC #:
020537010648
Manufacturer:
BoatLife / Life Ind.
Available: In Stock
78.8900
67.06
EACH
Quantity:
| Quantity | Price |
| 1 | 67.06 |
Repairs dried-out, rotted, and weathered wood. This unique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry before application. Apply by injecting into wood. The epoxy will soak into wood by capillary action.
One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.
How to use Git-Rot:
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.
For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.
Size: 1 pint.
One-half hour pot life after mixing. Sandable, paintable, and can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.
How to use Git-Rot:
First, locate the dry rot. There are a couple of techniques you can use to find dry rot - try tapping suspect areas with a hard instrument and listen for those "hollow-sounding" dead spots. Use a knife to probe where you think water is likely to pool or places that are constantly being re-wetted. In particular, make sure you check around hatches, seams, transom, planking, toe rails, stem and ribs.
For maximum strength and saturation, you will need a volume of Git-Rot epoxy approximately equal to half the volume of the rotted wood. When using Git-Rot, only mix small batches (around 4 oz.) since the larger the quantity, the greater the reaction and the faster the cure. Mix 1 part "B" and 3 parts "A", and shake vigorously for a minute. Immediately apply to the dry rotted area -- the epoxy penetrates best immediately after it's mixed. It will solidify overnight, but needs a full week for maximum strength.
Size: 1 pint.
Ground Shipping Only
KIT GIT ROT 4 OZ
Git Rot liquid epoxy kit
Item#:
BTL1063
Manufacturer:
BoatLife / Life Ind.
Available:
Out of Stock
34.5400
Your Price:
29.36
EACH
Call to Order
KIT GIT ROT QUART
Git-Rot liquid epoxy kit
Item#:
BTL1065
Manufacturer:
BoatLife / Life Ind.
Available:
In Stock
133.1300
Your Price:
113.16
EACH