Vinyl-coated steel wire construction.
Built-in bait cage.
Large side and top opening hatches.
Three ramp entrances.
Stretch tube and hook closures.
Two escape rings for smaller crabs.
Dimensions: 30" X 30" X 12".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Crab caliper for Alaska, Washington, Canada, and Oregon.
Displays various sizes.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Durable, polypropylene sinking crab line.
High strength, low stretch.
Good abrasion resistance.
Diameter: 1/4".
Tensile strength: 1,200 lb.
Color: Gray with orange tracer.
Length: 600 ft.

Includes: - Red and white float - 50 feet of 1/4" poly retrival rope - Line snap and weight.

A popular crawfish trap.
Made with 1/2" X 1" vinyl-coated wire.
Features two mesh entrance tunnels and an attached bridle rope.
Opens from the top for easy bait and catch access.
Tunnel openings are approximately 7" X 7", funnels down to 2.5" X 2.5".

Made in the USA. Not intended for commercial use.
Note: Check your local and state regulations for season and gear restrictions before use.

Manufactured from 3" x 3" black vinyl coated wire.
Opens from the top for easy catch and bait access.
Features four entrance gates and includes an attached harness.

Designed for use in WA, OR, CA, AK. Please check local regulations before use.

Dimensions: 24" X 24" X 9".

Made in USA.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Rubber-wrapped rebar with stainless steel wire netting.
Two entrance tunnels.
Opens from the top for easy dumping of catch.
Dimensions: 27" X 10".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Promar collapsible crab pot.
Vinyl-coated steel frame.
Heavy-duty poly netting.
Three tunnel entrances.
Two 4-1/4" escape rings.
Model TR-632.
Size: 32" diameter, 12" high.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

An octagonal shrimp pot with four tunnel entrances.
Exclusive ladder-ramp openings make this pot a top producer.
Has plenty of room to hold lots of shrimp.
High-quality vinyl-coated 14 gauge steel wire construction.
6" X 17" round bait tube, with a separate opening.
4" entrances.
Equipped with a "rottin' cotton" escape hatch that will allow shrimp to escape if pot is lost.
 
Overall dimensions: 30" X 17".
 
Not intended for commercial use. Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 30" wide. 1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Rectangular weight for a crab or shrimp trap.
Weighs down the trap so it will not float out of place.
2.5 pounds.

Rectangular weight for a crab or shrimp trap.
Weighs down the trap so it will not float out of place.
5 pounds.

Steel T-handle clam gun.
Measures 31" in height.
With a 5" X 15" long barrel.
Reinforced for strength at all joints.

Promar collapsible crab pot.
Vinyl-coated steel frame.
Heavy-duty poly netting.
Three tunnel entrances.
Two 4-3/8" escape rings.
Model TR-632A.
Size: 32" diameter, 12" high.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps
16 gauge, 12" wide.
1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Stainless steel construction.
Dual ramped entry tunnels.
Stretch mesh size: 3".
Overall dimensions: 16" X 32".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

Flat plastic netting great for making crayfish pots. 1/4" X 1/4" X 48". Available in 100 foot rolls.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Deluxe, made for larger West Coast crabs.
Made with rugged polypropylene netting.
Steel rings: 32" upper, 12" lower, 16" deep basket. 

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options. 

This rig will let you catch crabs with a rod and reel.

Simple to use: fill the cage with your favorite bait and cast the snare.

Bait door closes with a rubber band and hook.
Six clear monofilament loops.
Weighed down with a 2.5 ounce weight.

Proven design and non-metallic material. Aims the tunnel entrances upward. Clips onto middle cross bar of crab pot. Two suggested per pot.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 36" wide.
1" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.'

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Two entrance tunnels.
Opens from the top for easy dumping of crab.
Welded steel wire covered with blue powder coating.
Comes with a bait box.

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

For the CT04 and CTO3R octagon crab trap hatches. Comes assembled and ready to install. Includes biodegradable cord.

Small mesh slows crabs' access to bait.
Heavy-duty rubber band door.
Vinyl coated steel wire.

Two part kit: 
- Galvanized steel grappling hook. 
Hook has 30 feet of rope. 
- 5-1/2" white float. 
Float has 6 feet of rope and a stainless steel clip.

Galvanized steel construction. For grabbing pots out of the water. Dimensions: 8" X 5".

5" X 11" red and white float.
100 feet of leaded sinking rope.
Usable with any sport crab trap / pot.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 24" wide.
1" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Stainless steel construction.
Three ramped entrance tunnels.
Two 4-3/8" ID escape rings.
Large latched top opens easily for you to remove your crab catch.
Has a threaded shaft for installing a zinc.
Dimensions: 32" X 12".

For use in Washington and Alaska.
Not intended for commercial use.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Corrosion-resistant plated steel wire.
Pyramid shaped trap.
Strung with tough poly take-up cords.
Size: 14" X 14".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

A sacrificial anode helps prevent galvanic corrosion.
Cast aluminum.
Thread size: 1/2" NC.
2 lb.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
11 gauge, 36" wide.
3" X 3" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Vinyl-coated steel wire construction.
Built-in bait cage.
Large side and top opening hatches.
Four entrance gates.
Stretch tube and hook closures.
Two escape rings for smaller crabs.
Dimensions: 30" X 30" X 9".

Not intended for commercial use.
Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

May be cast with fishing rod.
Top mount swivel gives tangle free use.
2-1/2".

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
16 gauge, 24" wide.
1/2" X 1/2" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 36" wide. 1" X 1" spacing.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.