200 watts, 220 volts. For Aqua Signal floodlights.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034393-10. Intended for use with 3/8" lines. For Chrysler / Force motors. Weight: 1 lb.

Reverse eye round loose hook. Regular wood shell. Single sheave. Bronze bushings. Working load limit: 1200 lb. Fits 5/8" rope. Size: 5".

A resin-based additive for speeding up the curing process. For use in traditional one-part paints and varnishes. May be added for a harder, more scratch-resistant finish. Do not use with Epifanes Mono-urethane or Nautiforte. Size: 1/2 liter.

A hardened steel tip for a long life with less stripouts. Phillips #1 head.

External hailer speaker. 
Supports loudhailer listen-back radio features. 
Features a 5" white plastic horn speaker. 
4 ohm, up to 40 watt input. 
Easily hooks up to VHF radio external audio output. 
Size: 13" X 7".

Contains 400 reusable stickers. Ocean scenes for kids to play with. 16 pages.

Chrome plated brass tops with black plastic base Vertical surface mount. Complete with 12 volt bulbs Vessels up to 39.4' Dimensions: 4-1/4" x 2-3/8" x 1-5/8" Set of both port and starboard.

Mounting plate for MC-19 remote control. Designed for flush surface mount situations. A small 3/4" hole is required for installation. Weight: .25 lb.

Incandescent Bulb 130 Volt, 40 Watt 2/Pk Basic general purpose utility bulbs for direct, unfiltered light.

Heavy gauge chrome plated stamped brass. Removable pin 6 screw holes Height: 3", Width: 3" Weight: .5938 lb

C.S. Osborne sewing palm.
No. 266.
Left handed.
A fine quality leather palm.
Vinyl and iron thimble for sewing.

Bronze construction.
Full flow drain and grounding screw.
Hard chrome bronze ball.
Vinyl-coated stainless steel handle.
Pipe: 2".

---
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Do not use in connection with drinking water. Wash hands after handling.

Nitrile thermoplastic laminate (NTL) tube.
Reinforced with multiple high tensile textile spirals.
Covered with black OZO.
Formulated for gasoline, diesel and alcohol.
Flame-resistant, designed for engine compartments.
Meets all requirements of USCG, NMMA, ABYC.
Size: 5/16".
Available as 250 foot spool.

Knob for Dickinson motor speed control switches. Part # 01-120. Weight: .01 lbs.

Series 43 light.
Optimized for boats up to 50 meters.
High quality polycarbonate construction.
Inverse polarity protected.
Black housing.
Color: Green, starboard.

Dickinson speed control switch. Potentiometer rocker switch component only. Rated for 12 volts. Part # 01-072. Weight: .3 lbs.

Unlined, lightweight natural rubber latex.
Diamond pattern grip.
15 mil thickness.
Beaded cuff.
Length: 13".
Size: Extra large.

Quartzline halogen bulb 1000 watts, 240 volts. NMP, double ended. Q1000T3.

Wishbone harness style. Four-pin flat connection. Length: 18".

Wesbar Electric Wire Harnesses/Connectors Trailer Connector 48 Wishbone Provides years of dependable service. Conforms to SAE, NMMA/TMA standards.

Miniature lamp bulb with bayonet base - twin pack Features heavy duty glass envelope for break resistance and nickel-plated brass base helps prevent corrosion. Filaments designed to give hours of reliable burning. 12 volt, 3.8 watt, rated for 1000 hours. Weight: .04 lb.

The original System Three general purpose epoxy hardener.
Does not contain any VOCs, solvent-free.
Has excellent pot life and cure-time control.
Type: #2, Medium.
Provides a tack-free thin film in 4-6 hours @ 77° F (25° C).
Size: 1/2 gallon.

Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.
Diameter: 1-3/8".

Please contact us for shipping options. 

Equipped with a Viton O-ring. Quad port X 1/2" connector. Two per package.

Polyester fabric.
Designed for a range of water transfer/discharge solutions.
Softwall, non-wire construction.
Great for straight routings, not for steam.
Great for bilge, toilet, scupper and water discharge.
Meets SAE J2006R1 for marine exhaust hose.
Color: Black with blue stripe.
Rated for -40°F to 250°F.

Please contact us for shipping options. 

Screw pin anchor shackle. Regular wood shell. Double sheave. Bronze bushings. Working load limit: 1800 lb. Fits 5/8" rope. Size: 5".

Polyethylene-coated polypropylene construction. Non-skid, PE-coated covers provide non-slip protection. A durable barrier against paint, resin, and other liquids. One size fits all.