Buzz Bomb. "Nite Glo". For mooching, casting, or trolling. 3".

Sinker with a spinner.
6-bead chain with a swivel.
Size: 6 oz.

High-quality, durable construction. Stronger than a standard diamond jig. Thick gauge wire with a high-strength swivel. 14 ounce. Color: Blue Bass.

Net dimensions: 6" X 5-1/4". Handle length: 14".

Stainless steel. Unique design. Spring action for easy snap on / snap off use.

For trolling, casting, or bottom fishing. Features: - Multi-disc star drag system - Convertible power handle - Shielded, stainless steel - Precision machined, stainless steel pinion - High strength, manganese bronze main gear - Single-piece aluminum spool. Line capacity yards/pounds: 320 / 20. Gear ratio: 3.2 : 1.

A popular rock cod rig.
Two flies tied onto 60 lb. leader.
7/0.

Color: White / pink.

Buzz Bomb. "Hot Pink". For mooching, casting, or trolling. 3".

Single release. Attached with leader to a #9 snap. Black clip.

Release has firm tension to reduce false releases. Allows you to run two lines off the same downrigger

Buzz Bomb. "Blue Pearl". For mooching, casting, or trolling. 2-1/2".

High-quality, durable construction. Stronger than a standard diamond jig. Thick gauge wire with a high-strength swivel. 14 ounce. Color: Mackerel.

Breaking strength: 122 lb.
Size: 6.

100 per package.

High-quality 500 lb. test mono paired with ROSCO swivels, a USA-made corkscrew for attaching your sinker, and two high quality circle hooks.
Hook sizes: 18/0.

High-quality, durable construction.
Stronger than a standard diamond jig.
Thick gauge wire with a high-strength swivel.
14 ounce.
Color: Baby Red.

A super-round, long-lasting braided line.
Each strand is coated, braided and heated.
Length: 300 yards.
65 lb. test.
Color: Dark Green.
Made in Japan.

Buzz Bomb. "Army Issue". For mooching, casting, or trolling. 2-1/2".

High-quality, durable construction. Stronger than a standard diamond jig. Thick gauge wire with a high-strength swivel. 14 ounce. Color: Silver Flash.

It's razor clam season! When the weather starts getting colder, it's time to head to the coast!

The Pacific razor clam is one of the most popular types of shellfish harvested in Washington state. They're super meaty with a narrow, slightly curved shell -- much like the handle or blade of an old-style straight razor. (The edge of the clamshell can be "razor-sharp" too, so watch your fingers when you're digging!)

The folks that live in the Pacific Northwest are lucky to have one of the best razor clam locations in the world. Digging for these delicious clams is a fun activity suitable for all members of your family, from kids to grandparents. Depending on where you go, you might see as many as a thousand other razor clam seekers sharing the beach. But don't worry: there are plenty of razor clams for everyone.

So how do you prepare to go razor clam digging?

You definitely need the right gear before you go.
The basic setup for a day of razor clamming includes:
 1) The correct license
 2) A clam shovel or clam gun
 3) A clam net bag to hold your catch

First, make sure you have the proper Washington state license. You will need a razor clam license to harvest clams legally (or one of the shellfish/seaweed combo licenses, there are several different kinds). You can order one online, by phone, or at an authorized license dealer. Once you have it, you'll need to keep that license in your possession while you're digging and after you've caught your limit (in case a ranger needs to inspect it).

Next, you'll need a tool to actually dig down and pull those elusive clams out of the sand. The Danielson clam gun is one option of that necessary gear (the other option is a clam shovel).

This clam gun has been engineered specifically for removing razor clams from sandy ocean beaches. Its ultra-light corrosion-resistant aluminum construction make it easy to transport, while staying strong enough to burrow into any shore in pursuit of shellfish.

Measuring 31" in length, it features a 5" x 15" barrel with a 1-3/16" x 10" T-handle with a polycarbonate lining to pad your hands a little bit. (Some people consider the aluminum Danielson razor clam gun to be the Cadillac of clam guns.)

Now, like the old-time clam expert says: "Ya can't dig ya clams at high tide." After you've found your spot at LOW tide, go searching along the shore for dimples in the sand.

So how do you use a clam gun?

Set your clam gun barrel off-center with more sand on the side facing the water. Push down while twisting back and forth, rocking in a circular manner. Once the barrel is as deep as you can go, block the air vent on the underside of the handle with your finger, then pull straight up. When you remove your finger from the vent hole, a core of sand will drop out onto the beach -- and this is where your razor clam will be, if you've got the clammer's luck.

If you want to know more about clam gun usage, try watching a video or two before you go.

PVC coated, galvanized steel wire mesh.
For use in commercial and recreational shrimp and crab traps.
14 gauge, 30" wide.
1" X 1" spacing.
Color: Green.

Fishing regulations change often: it is the owner's responsibility to know and follow the current federal, state and local regulations for shellfish harvesting while using this product.

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Breaking strength: 122 lb.
Size: 6.

20 per package.

Three-way deluxe spreader. 18/0 hook.

Lead cannonball with stainless steel eye. Weight: 48 oz.

15". For cooking crabs in deep pots. Black enamel coating for a long life of use.

Stainless steel. Rated for 100 pounds. 12 per pack.

From the "Dart Baitfish" lure series. Mimics a needlefish. For jigging, trolling, or casting. Has an attached treble hook. Color: Pearl white. Size: 2-1/4 oz.

Used for trolling and mooching in fresh and saltwater. Crescent shaped for top-notch spinning. Stainless steel bead chain swivel. Nickel crane swivel prevents line from twisting. Swivels are attached to eyes cast into each end of sinker. Size: 1/2 oz.

This rig will let you catch crabs with a rod and reel.

Simple to use: fill the cage with your favorite bait and cast the snare.

Bait door closes with a rubber band and hook.
Six clear monofilament loops.
Weighed down with a 3 ounce weight.

For the CT04 and CTO3R octagon crab trap hatches. Comes assembled and ready to install. Includes biodegradable cord.

Buzz Bomb. "Chrome". For mooching, casting, or trolling. 3".

Small mesh slows crabs' access to bait.
Heavy-duty rubber band door.
Vinyl coated steel wire.

Add a little flair to your grub tails or leaders with a grub skirt!
Made from a proprietary blend of material.
Heavy-duty and durable, yet highly flexible.
Simply slide it over your existing leaders to add more eye catching "candy".

Color: Glow-in-the-Dark.

Made in Alaska.

Two part kit: 
- Galvanized steel grappling hook. 
Hook has 30 feet of rope. 
- 5-1/2" white float. 
Float has 6 feet of rope and a stainless steel clip.

Galvanized steel construction. For grabbing pots out of the water. Dimensions: 8" X 5".

The original stainless steel cod jig.
Used by commercial fishermen all over the world.
Heavy gauge metal design.
Beautifully engineered for a long life in rough conditions.
Size: 36 oz.

High-quality 500 lb. test mono paired with ROSCO swivels and a USA made corkscrew.
Designed for attaching and detaching your primary leader.
This allows you to easily swap out set ups on the fly without having to retie.