Pipe Deck Fill Replacement Cap for: 351350 - 351353 Investment cast 316 Stainless. Models: 351350 - 351353 Cap threads are: 1-1/2" - 12 NPSM Straight

A replacement cap for a Sea-Dog hose deck fill.
Stainless steel.
Fits 1-1/2" threads.

Soft black flange gasket with integral flip-up cap Soft black lip Replacement or upgrade for older holders Weight: .1875 lb

Brass chrome plated Designed to provide a fresh water hookup to a pressurized water system while moored Has standard female swivel hose connector Base Width: 2-3/4" Length: 2-3/8" Weight: .4 lb

Features a locking cap to help prevent fuel theft.
Cap spins freely when in the locked position.
Stainless steel construction.
Fits 1-1/2" hose.

Includes two keys and a cap attachment cable.

Marked "Gas".

Stainless steel pipe deck fill.
Designed for use with water.
No plastic or nylon parts.
Integrated raised label for easy identification.
Includes an attachment chain so you won't lose the cap.
Marked "WATER".
Designed to be connected to 1-1/2" straight threaded pipe.

Designed to be connected to 1-1/2" straight threaded pipe.
Includes an attachment chain so you won't lose the cap.
Marked "DIESEL".
Stainless steel.

Nylon construction.
1-1/2" connection.
Body only. Does not include a cap.

Injection molded nylon Dimensions: 1" x 1-1/8" Weight: .01 lb

Features a slotted cap which requires a key to open and close for extra security.
These fills contain no metal and do not require grounding.
Nylon construction.
1-1/2" connection.
Blue cap: marked "Water".

Display packaged.

Investment Cast 316 Stainless Steel Locking hose deck fills prevent fuel theft and include two keys. The cap threads are 1-1/2". Weight: 1.25 lb

Straight neck Black plastic Integral tank vent with flame arrestor No deck plate key or ground wire required Flip top cap Marked for gas Weight: .2813 lb

Diesel cap with O-Ring and Retainer Weight: .1 lb

Injection-molded nylon construction.
Features a built-in key for easy cap removal.
May be locked open, or closed in a flush position.
Includes an attachment chain.
Labeled "Gas".
Color: Red.

Features a slotted cap which requires a key to open and close.
Includes a cap attachment chain.
Marked "GAS".
Stainless steel construction.
2" hose connection.

Features a slotted cap which requires a key to open and close.
Includes a cap attachment chain.
Marked "DIESEL".
Stainless steel construction.
2" hose connection.

Features a slotted cap which requires a key to open and close.
Includes a cap attachment chain.
Marked "WASTE".
Stainless steel construction.
1-1/2" hose connection.

Stainless steel. Hose deck fill. 1-1/2".

Features a slotted cap which requires a key to open
Marked "Water".
Stainless steel construction.
Fits 1-1/2" hose.
Includes attachment chain.

Allows air to enter to break siphon. Does not permit air and odors to escape. Assures clog free anti-siphon protection. If used in exhaust system, overboard venting is required. Hose connection: 1-1/2".

Injection Molded Nylon For 5/8" hose Weight: .05 lb

Stamped 304 stainless Dimensions: 1-5/8" x 1-3/4" Weight: .01 lb

Stamped 304 stainless Dimensions: 2-1/4" x 2-1/8" Weight: .03 lb

Stamped 304 stainless Length: 7" Width: 5-3/4" Weight: .58 lb

Stamped 304 stainless Length: 7-1/2" Width: 6-3/4" Weight: .79 lb

Stamped 304 stainless Diameter: 4" Weight: .16 lb

Stamped 304 stainless Length: 5" Width: 4-5/8" Weight: .35 lb

Stamped 304 stainless Length: 5" Width: 9" Weight: .4 lb

Vent cap assembly for Forespar vented loops. "Duck bill" style. Commonly used in marine toilet or engine cooling systems. Molded from corrosion-proof Marelon. Manufacturer number: 903002 MF-841.

Vented loop assembly. Commonly used in marine toilet or engine cooling systems. A valve at the top of the loop allows air to enter line when system isn't in use, but seals when fluid is present. Molded from corrosion-proof Marelon. Manufacturer number: MF 844 903007. Barb size: 1". Dimensions: 7" X 9". Weight: .8 lb.

Vented loops are anti-siphon safety devices. For use with both manual and electric marine toilets. Plastic construction. Diameter: 3/4". Weight: .2 lb.

Injection molded ABS. Dimensions: 2-13/16" X 3-5/8". Hose / hole size: Up to 3". Color: White. Display packaged.

Perko gas tank vent with swivel elbow. Chrome-plated zinc alloy cowl. Black polymer cap. Removable flame arrestor mesh screen for fuel applications. Weight: .28 lb.

Flush mounted. Stainless steel. Diameter: 5/8".

Chrome plated pressure cast bronze with removable Monel wire 30 mesh screening Hole size: 3/8".

Injection molded ABS. Dimensions: 3-9/16" X 4-15/16". Hose / hole size: Up to 4". Color: White.