Fuel filter kit with clear bowl. Allows for visual inspection of water build-up. Lightweight housing mounts easily to bulkheads. Pitcock valve allows drainage without filter removal. Weight: 1.6 lb.

Separates water from fuel. Rated for 10 microns.

Traps dirt and metallic particles. Lets you immediately inspect your fuel condition. Not for use on inboard engines. Includes connection barbs in 1/4", 5/16", 3/8".

Removes particles and emulsified water from gasoline. Filtration media will not separate 2-cycle oil from gasoline Designed for: Mercury, BRP (Johnson/Evinrude), Yamaha, Suzuki, Honda, Tohatsu & Nissan engines. Universal use also. High performance 3/8" NPT ports. Powder-coated aluminum filter head. Not recommended for use with diesel engines.

Replacement filter for 7852 Separator 28 micron Weight: 1 lb

Culligan "whole-house" sediment water filter housing. Fits various filter cartridges for cleansing water. Extends the life of household appliances. Durable and opaque. Quick and easy to install. Has 3/4" inlet and outlet. Typically installed on main water lines. Weight: 3.02 lb.

Clear plastic. Designed for easy inspection. Diameter: 3/8".

Clear plastic. Designed for easy inspection. Diameter: 5/16".

For low-flow applications with space restrictions. Clear styrene acrylonitrile for easy flow viewing. Used with a 5" X 2-1/2" filter cartridge.

Replacement fuel filter element. 25 micron element for inline fuel filter. Includes required gaskets. Part # 20-020.

Fuel filter with shut-off valve. A perfect filter for a Dickinson stove. Stainless steel and glass filter. Stone element included. Part # 20-010. Weight: .6 lbs

For under-sink water filtration systems. Reduces effort required to install/remove filter housings. Plastic construction.

The Valve-in-Head (VIH) patented technology allows for easy water filter cartridge replacement. Pressure Release Button for fast release of the whole house water filter pressure. Thick walls for increased strength.

High dirt-holding capacity maximizes utilization of activated carbon.
Highly effective at reducing unpleasant taste and odor.
5 micron rating.
2-3/4" X 10". 

Fits housing #4-6 10230.

Triangular flange base. Full flow. Side port has a quick-release plug for emergencies. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 2" NPT top and bottom ports.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1-1/4" NPT top.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1" NPT top.

Forespar MF 849 flange mounting seacock. Molded in high strength glass-reinforced Marelon. Strong, lightweight, and corrosion resistant. Uses a ball valve to control flow. For controlling water needs above or below the waterline. Diameter: 3/4". Weight: .4 lb.

Forespar MF 849 flange mounting seacock. Molded in high strength glass-reinforced Marelon. Strong, lightweight, and corrosion resistant. Uses a ball valve to control flow. For controlling water needs above or below the waterline. Diameter: 1/2".

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1-1/2" NPT top.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 3/4" NPT top.

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 2" and 2-1/2" seacocks. Diameter: 7.13".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3" and 4" seacocks. Diameter: 9.5".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3/4" and 1" seacocks. Diameter: 4.29".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 1-1/4" and 1-1/2" seacocks. Diameter: 5.38".

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 4-7/8" Pipe Size: 1-1/4" Weight: 5.125 lbs

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 2" NPT top.

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 4-3/8" Pipe Size: 1" Weight: 2.5 lbs

Forespar MF 849 flange mounting seacock. Molded in high strength glass-reinforced Marelon. Strong, lightweight, and corrosion resistant. Uses a ball valve to control flow. For controlling water needs above or below the waterline. Diameter: 1-1/2". Weight: 1.5 lb.

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 3-1/4" Pipe Size: 3/4" Weight: 2.5 lbs

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 7-1/4" Pipe Size: 2-1/2" Weight: 12 lbs

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 5-3/4" Pipe Size: 2" Weight: 11.375 lbs

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 5-1/2" Pipe Size: 1-1/2" Weight: 6.375 lbs