Bronze construction. Nitrile impeller. Lip seal, stainless steel shaft. 1/2" ports, horizontal orientation.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Self-priming with ability to operate in either direction at variable speeds Removable end cover for easy impeller service 11.3 GPM - 1/2" NIPT - 5/8" diameter shaft Weight: 4.51 lbs

FC Tournament Series pump.
For seacock applications.
3/4" intake.
3/4" discharge hose.
Flow rate: 800 GPH.
12 volts.

Bronze impeller pump. Can handle small bilge debris. Flow rate: 8 GPM. 12 volts.

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

Rated for 5 gallons per minute. 70 PSI maximum pressure. Includes: - Pump - 25 feet of coiled hose - Pump protector inlet strainer - Spray nozzle - Two-way panel switch with fuse.

Dockside general purpose pumping and some onboard uses.
Self-priming and portable, very versatile.
Removable end cover allows easy impeller service.
Pump heads are built of bronze materials.

FC Tournament Series livewell pump.
3/4" straight pickup tube.
1/2" port for washdown pump attachment.
500 GPH.
Discharge: 3/4".
12 volts

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 15.25 lbs

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

Pacer's S Series self-priming centrifugal pump.
Lightweight and chemically resistant for general service.
Suitable for water, salt water, waste water, and mild acids and bases.
Constructed from polyester.
Stainless steel or non-metallic fasteners for resistance to chemical attack.
Suction lift to 25 ft. (7.6m) vertical.
- Requires 9.5 GPM for maximum pumping capacity
- HP required is 5.0
- Up to 230 GPM
- Buna-N elastomers
- Port size : 2" FNPT.
Pedestal mount.

Pacer's S Series self-priming centrifugal pump.
Lightweight and chemically resistant for general service.
Suitable for water, salt water, waste water, and mild acids and bases.
Constructed from polyester.
Stainless steel or non-metallic fasteners for resistance to chemical attack.
This model is equipped with a hydraulic motor.
Suction lift to 25 ft. (7.6m) vertical.
- Requires 9.5 GPM for maximum pumping capacity
- HP required is 5.0
- Up to 230 GPM
- Buna-N elastomers
- Port size : 3" FNPT.

Stainless steel housing and polyester internal parts. Dual 1-1/2" female and 2" male suction and discharge ports. Rated for 3450 RPM.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 21.65 lbs

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1b Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 22.8 lbs

Long life circulation, high efficiency and flow Use for hot and cold water systems, live well and bait tank systems, liquid transfer also windscreen washing 3/4 " NPT or BPS Dimensions: 6" L x 6-1/2" W x 5" H Weight: 4 lbs

Continuous duty motor and thermal overload protection No harm if pump runs dry Self priming can install above water line Calibrated for correct water movement for lively bait Use with 15 to 30 gallon tanks Includes 3/4" strainer Uses: Diesel fuel, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing, oil elastometer Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb Weight: 4 lbs

Chrome plated brass faucet. Includes compression fitting hardware. Integrated 35 psi shutoff pressure switch. Low power consumption (2.5 amps at 12 volt). Quiet operation and self priming.

Designed for washdown or for livewell tanks.
Heavy-duty construction.
Ideal for commercial or pleasure boats.
1-1/2" inlet, 1-1/2" discharge outlet.
Rated for 3700 GPH.
Must be mounted below waterline.
Operates at low pressure; not self-priming.
12 volts DC.

Fynspray rocker action pump.
May be used with either fresh or salt water.
Self-priming.
Tough non-corrosive white plastic and chrome steel.

Fynspray rocker action pump. May be used with either fresh or salt water Self-priming. Tough non-corrosive black plastic and chrome steel. Weight: 1 lb.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Self-priming with ability to operate in either direction at variable speeds Removable end cover for easy impeller service 83 GPM - 2" NIPT - 1" diameter shaft Weight: 21 lbs

Pacer self-priming centrifugal electric water pump.
Lightweight, chemically-resistant for general service.
Can handle water, saltwater, waste water, mild acids and bases.
Diameter: 2".
Rated for 110 gallons per minute (GPM) maximum flow.
Glass reinforced polyester with lined volute.
Stainless steel internal parts.

Nylon pump body.
Rated for 5.2 gallons per minute.
Activates at 25 PSI, cuts out at 40 psi.
Quiet operation, smooth flow.
Compact design.
3/8" port, 1/2" hose output.
12 volt DC.

iL500 Plus pump. Suitable for diesel, salt or fresh water. Rated for 500 gallons per hour. Includes: - Pump - Spray nozzle - 4 meter cable with battery clips - 4 meter lay-flat hose. 3/4" ports. 12 volts.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Pedestal mount, corrosion resistant bronze pumps Self-priming and portable, very versatile Removable end cover allows easy impeller service Pump heads are built of bronze materials 62 GPM, 1-1/4" NIPT Port, 1" shaft, face seal, brass cam and impeller insert Weight: 12.6 lbs

For use with 1 to 5 gallon accumulator tank. Designed for 6 or more fixtures. Quiet, smooth flow. Not harmed if it runs dry. Strainer included. Plug-in ports, easy to install. May be attached to garden hose or 3/4" hose barbs.

1.24 CID hydraulic motor. 1-1/2" NPT impeller pump. 2000 maximum RPM. +/- 70 GPM of water at 2000 RPM. 11 GPM of oil required to achieve 2000 RPM. Aluminum bracket.

1.24 CID hydraulic motor. 1-1/4" NPT impeller pump. 2000 maximum RPM. +/- 55 GPM of water at 2000 RPM. 11 GPM of oil required to achieve 2000 RPM. Aluminum bracket.

Can deliver almost 7 GPM at open flow. Equipped with pressure-cast bronze body. Features a reusable O-ring type end cover seal. 1/2" internal pipe thread and 1" external hose barb. Includes 2 port adapter. 12 volt DC. Weight: 6.06 lbs

Nylon pump body. Rated for 3.5 gallons per minute. Activates at 25 PSI, cuts out at 40 psi. Quiet operation, smooth flow. Compact design. 3/8" port, 1/2" hose output. 12 volt DC.

Johnson Aqua Jet water pressure system. A postive displacement diaphragm pump for small craft. Works great for pressurized water supply systems. Rated for 3.5 GPM. 3/8" NPT, 1/2" hose ports. Weight: 5.5 lbs.

Thermoplastic pump body. Rated for 5 gallons per minute. Stainless steel shaft. 3/4" ports. 12 volts DC.

Provides pumping power at the push of a button. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/2" ports.