Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
24 volt DC.

Combination displacement lift / siphon pump. Suitable for transferring diesel, oil, or water. Clear tubing. Not intended for PVC-attacking solvents.

An auxiliary water pump. 1" inlet and outlet. 12 volt.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1B Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 14.75 lbs

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
12 volt DC.

Engine Cooling Pump & General Purpose Pumping 3.7 GPM, 1/4" NIPT Port Connections. Pedestal mount, corrosion resistant bronze pumps: Use for engine cooling, washdown, circulation, & general purposes on-board or dockside. Bronze or stainless steel shaft installed with permanently lubricated ball bearings for long life & heavy-duty service. Self-priming with ability to operate in either direction at variable speeds. Capacity ranges from 3 GPM to 83 GPM with varied port configurations and sizes. Most models have replaceable cams/wearplates for extended product life. Removable end cover for easy impeller service. Standard impeller for these pump models is neoprene. (some have alternative oil resistant nitrile impellers available.)

Plastic pump body. Designed to provide constant water pressure. 3/8" ports. Automatic flow from tank to faucet. 12 volt DC.

Designed for washdown or for livewell tanks.
Heavy-duty construction.
Ideal for commercial or pleasure boats.
1-1/2" inlet, 1-1/2" discharge outlet.
Rated for 3700 GPH.
Must be mounted below waterline.
Operates at low pressure; not self-priming.
24 volts DC.

Jabsco 50900 Fish Box evacuation pump. A single-diaphragm, 5 GPM plastic-body pump. Perfect for emptying the fisbox after a day's fishing. This self-priming pump is designed to pass debris, such as bait residue, ice particles, fish scales, etc. OK to run dry and equipped with a 360º rotatable head. 12 volt.

Keep your decks clean with this high-flow and high-pressure diaphragm pump kit.

A HD model that features a heavy-duty motor and cast aluminum lower housing.
Efficient, quiet and self-priming.
Runs dry without damage.
Quick-connect ports make it easy to install and service.
Kit includes 25 feet of coiled hose and a spray down nozzle.

Polypropylene pump body
Rated for 5.2 gallons per minute
Activates at 25 PSI, cuts out at 40 psi
Quiet operation, smooth flow
Has a 2 liter accumulator tank
1/2" hose output
12 volt DC.

Similar in design to an electromagnetic clutch pump. Equipped with a mechanically activated clutch. Provides added operational security in case of power failure Rated for 26 gallons per minute. 1" port.

1.8 CID hydraulic motor. 2" NPT impeller pump. 2000 maximum RPM. +/- 90 GPM of water at 2000 RPM. 15 GPM of oil required to achieve 2000 RPM. Aluminum bracket.

Bilge, deckwash, and refueling pump. Rated for four gallons per minute. Used for water circulation, not for petrochemicals. Bronze body, stainless steel shaft. Dimensions: 6.7" X 4" X 3.22".

Replaceable wear plate to extend service when handling abrasive fluids
9.5 GPM - 115 Volt Motor - 1/3 HP - 1/2" NIPT
Dimensions: 7-3/4"H x 7-1/4"W x 10-1/2"L

Suitable for diesel, salt or fresh water. Rated for 500 gallons per hour. 3/4" ports. 12 volts.

A compact, general-purpose pump. Bronze body. Neoprene impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

Has a high capacity flow rate and horizontal-oriented ports. Rated for 4710 GPH. Self-priming up to 15 feet. Mechanical face type shaft seal. Nitrile impeller. Fitted with single "B" groove pulley. 12 volt.

Marine bronze and stainless steel for reliability. Self-priming. 1-1/4" NPT input. 1" shaft. 1/2" cam.

Replacement pump only, does NOT include clutch. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/2" ports.

A centrifugal booster pump. Bronze construction. 1/2" inlet and outlet. 12 volt.

Provides pumping power at the push of a button. Has a connection for a vacuum switch accessory. Bronze construction. Mechanical seal, stainless steel shaft. 1-1/4" ports.

Pump with oil resistant nitrile impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Flexible impeller self priming bronze pedestal pump.
Typical Marine Applications:
-Engine cooling
-Bilge pump
-Wash-down pump
-Emptying holding tanks  
Bronze body. 3/8" NPT ports.  Rated for 6 GPM at 1800 RPM.  Neoprene impeller. 3/8" stainless steel shaft.
Caution: Do not run dry.

Pump with neoprene impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Pump with oil resistant nitrile impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Plastic pump body. Nitrile valves and diaphragm. Rated for 8.1 gallons per minute. 1-1/2" ports. 12 volt DC.

Thirsty-Mate high capacity super pump. Coast Guard approved for commercial use. Model 519CG#2. Three strokes per gallon, rated for 22 gallons per minute. Inlet hose is 24", outlet hose is 72". Length: 24". Diameter: 3". Weight: 8.3 lbs.

Use for diesel fuel transfer, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing Fitted with oil resistant elastomers Self-priming, may be mounted above the waterline Heavy-duty ball bearings, thermal overload protection Continuous duty motor provides quiet operation & smooth flow Runs dry without harm to pump Includes plug-in ports for easy installation, two garden hose ports and two 3/4" hose barb ports Includes a 3/4" inlet strainer Weight: 6 lbs

Bronze construction. Tolerates hard or soft solids. Pumps in either direction, will not airlock. 1-1/2" ports. Rated for 44.5 gallons per minute.