Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.
50 feet per box.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

Solid brass high-pressure "T" fitting.
For installation between cylinder valve and regulator or pigtail POL fittings.
Fully assembled and leak-tested.
Swivel male POL to female POl receptacle to 1" 20 male fitting with O-ring and check valve (with captive safety cap).
Designed to be used with a gas conversion hose.
Dimensions: 2" X 4.5" X 2".

300 PSI gauge.
20" QCC pigtail hose included.
Wall mount, single stage.
Meets ABYC standard.

For use in extreme temperature conditions. 
Inner tube is red heat-resistant silicone. 
Reinforced with nylon fiber. 
Cover is heat and weather-resistant silicone. 
ID: 3/8". 
Rated for 80 PSI.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 3/8". 250 feet per spool.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 3". Length: 12.5 feet.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 5/8".

Shieldsflex II marine water/exhaust hose.
Black synthetic rubber tube and cover.
Reinforced with a wire helix imbedded in HD synthetic cord.
Resistant to exhaust fumes, mild chemicals, ozone, antifreeze, and saltwater.
Abrasion and odor permeation resistant.
Primarily used for engine intake, wet exhaust connections, bilge pump intake, scupper lines, toilet exchange / discharge and more.
Meets SAE J2006 type R2 standards.
Color: Black with blue stripe.
Diameter: 3-1/2".
Length: 12.5 feet.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: Black.

Withstands water up to 180 degrees.
Stays flexible in cold temperatures.
3/4" diameter.
50 feet long.
Color: Red.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 3/4".

Fire-retardant marine fuel hose.
Resists alcohol-enhanced gasoline.
High nitrile rubber construction.
Reinforced with two spirals of synthetic fabric.
Diameter: 1/4".
50 feet per box.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/4". 250 feet per spool.

Fire-retardant marine fuel hose. Resists alcohol-enhanced gasolines. High nitrile rubber construction. Reinforced with two spirals of synthetic fabric. Diameter: 1/2". 250 feet per spool.

Heavy-duty for hot or cold water systems. Extra wall thickness increases kink resistance. FDA-approved virgin vinyl compound. Diameter: 3/8".

High-impact polypropylene construction. Split, ribbed design allows for expansion. Rated for 25 lb. Size: 2".

High-impact polypropylene construction. Split, ribbed design allows for expansion. Rated for 25 lb. Size: 1-1/2".

High-impact polypropylene construction. Split, ribbed design allows for expansion. Rated for 25 lb. Size: 1/2".

High-impact polypropylene construction. Split, ribbed design allows for expansion. Rated for 25 lb. Size: 1-1/4".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 20 mm. Size range: 59 - 63 mm, 2-5/16" - 2-1/2".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 20 mm. Size range: 63 - 68 mm, 2-1/2" - 2-11/16".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 68 - 73 mm, 2-11/16" - 2-7/8".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 73 - 79 mm, 2-7/8" - 3-1/8".

Type 201 stainless steel for high strength. Industry standard with fully rounded edges Simple to install. Size: 3/8". Available in 100 foot lengths.

Sea Tech elbow clip mount. Bends and secures polyethylene tubing at a 90° angle. For 1" tubing. Mounts to wall or bulkhead with a single screw.

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 97 - 104 mm, 3-13/16" - 4-1/8.

Resealable bag of 10 hose clamps.
All stainless steel construction.
Includes:
- Two Micro-Gear clamps, size 4
- One 1/2" Hy-Gear clamp, size 6
- Three 1/2" Hy-Gear clamps, size 12
- Three 1/2" Hy-Gear clamps, size 20
- One 1/2" Hy-Gear clamp, size 36.

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 104 - 112 mm, 4-1/8" - 4-7/16".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 18 mm. Size range: 37 - 40 mm, 1-7/16" - 1-9/16".

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 20 mm. Size range: 43 - 47 mm, 1-11/16" - 1-7/8".