Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

High quality multi-purpose rubber hose with EPDM liner Great wash-down hose

Solid brass high-pressure "T" fitting.
For installation between cylinder valve and regulator or pigtail POL fittings.
Fully assembled and leak-tested.
Swivel male POL to female POl receptacle to 1" 20 male fitting with O-ring and check valve (with captive safety cap).
Designed to be used with a gas conversion hose.
Dimensions: 2" X 4.5" X 2".

Shields 400/402 Vinylvent Vent Hose 3" 3 1/8" 8 Black Venting of bilge gases & fumes. PVC hose supported by helical wire. Resistant to ozone, sunlight and weathering. Will not support a flame.

Multi-purpose agriculture petroleum hose.
For grease, gasoline, kerosene, and other oils.
Diameter: 1".

For use with sinks, showers, drain lines, pumps, AC systems. Resists mild chemicals, heat, cold, ozone, saltwater. Designed for flexibility and heavy-duty suction. Color: Clear blue spiral. Diameter: 3/4".

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 1-7/8". Length: 12.5 feet.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/2".
Color: Black.
50 feet per carton.

For use with water drainage. Resistant to chemicals, heat, cold, ozone, saltwater. Temperature range: -40° to -210° F. Color: Black. Diameter: 5/8".

Double-ply soft wall, no wire.
For straight connection in wet exhaust systems.
Okay for either gasoline or diesel engines.
Designed for coolant and heat resistance.
Color: Black with blue stripe.
Temperature range: 0° to 212° F.
Diameter: 4".
Length: 12.5 feet.

For use with sinks, showers, drain lines, pumps, AC systems. Resists mild chemicals, heat, cold, ozone, saltwater. Designed for flexibility and heavy-duty suction. Color: Clear blue spiral. Diameter: 3".

For use with sinks, showers, drain lines, pumps, AC systems. Resists mild chemicals, heat, cold, ozone, saltwater. Designed for flexibility and heavy-duty suction. Color: Clear blue spiral. Diameter: 2".

For use with sinks, showers, drain lines, pumps, AC systems. Resists mild chemicals, heat, cold, ozone, saltwater. Designed for flexibility and heavy-duty suction. Color: Clear blue spiral. Diameter: 1".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/4".
Color: Black.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 7/8". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 2-1/2". Length: 12.5 feet.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 2-1/4". Length: 12.5 feet.

Kink resistant and flexible. Designed with an EPDM tube and cover. Wire-reinforced with two fabric plies. Resistant to toilet chemicals, odors, salt water and heat. Primarily used for toilet to holding tank connections. Works well as a holding tank pump-out hose. Diameter: 1-1/2".

Resists permeation from alcohol-enhanced gasoline. Weather and UV resistant PVC cover. Complies with EPA and CARB low-permeation standards. Diameter: 5/8".

Resists permeation from alcohol-enhanced gasoline. Weather and UV resistant PVC cover. Complies with EPA and CARB low-permeation standards. Diameter: 5/8". 250 feet per spool.

Designed for engine intake, bilge discharge and other lines. Reinforced with wire helix embedded in synthetic material. Excellent flexibility and bend radius. Resists heat, fumes, ozone, acid, salt water and abrasion. Color: Black with blue stripe. Diameter: 2-1/8". Length: 12.5 feet.

For venting bilge gases and fumes.
PVC hose supported by helical wire.
Resistant to ozone, sunlight and weathering.
Will not support a flame.
Diameter: 4".

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 1-1/2".

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 30 feet.
UL listed.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 25 feet.
UL listed.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 20 feet.
UL listed.

Propane / liquid petroleum gas (LPG) supply hose. Thermoplastic construction. Both ends are 3/8" female flare fittings. Length: 15 feet.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 10 feet.
UL listed.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/4".

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/2".

Designed to connect wall-mounted regulators
to LPG gas cylinders with Type I valves.
One end has a 1/4" male inverted flare fitting.
Other end has a thermoplastic QCC nut for quick and easy hand tight connection.
The "new-style" QCC connection will not allow any gas to flow through unless properly connected, and has a heat-sensing fail-safe feature that shuts off all gas flow if the the temperature reaches 2400° to 3000° F. Additionally, a controlled-flow device will activate in the case of a downstream gas system break (activates at 200 cubic feet / hour).
Fully assembled, leak-tested, and UL listed.
Length: 20".

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/8".

5 feet long.
High-pressure rated.
3/8" female swivel flare end fittings.
UL 21 listed.