Self-priming pump with run-dry protection. Triple-sealed motor to prevent corrosion. Four-bladed chopper reduces clogging. Flow rate: 12 GPM. Self primes up to 4 feet of vertical lift. Ports: 1-1/2" and 1". 24 volts DC, 8 amp draw.

Cast bronze construction. Diameter: 1/4" X 1/8".

High-temperature, single wire braid reinforced hose.
Synthetic rubber construction.
Often used with E-series Flextral crimps.
Size: #12, 3/4".
Work pressure: 1500 psi.
Color: Blue.
SAE J1942/1 USCG - HF Type B accepted.

Cast bronze construction. Diameter: 3/4" X 1/2".

Replacement for the Jabsco 4568-0003 impeller Globe's RED Run-Dry Impellers are specially designed to withstand diesel fuel and engine oil without swelling. Only impeller able to run dry for 15 minutes Globe impellers are made of Brandonite a high-strength, elastomeric material with self-lubricating compounds for run-dry protection and improved resistance to sand and dirt to help keep you going in the most difficult conditions.

High-temperature, single wire braid reinforced hose.
Synthetic rubber tube.
Used with E-series Flextral crimps.
Size: #8, 1/2".
Work pressure: 2300 psi.
Color: Blue.
SAE J1942/1 USCG - HF Type B accepted.

Designed to handle large fluid extraction applications. Ideal for removing stagnent bilge fluids. Dual-action pump works on both upstroke and downstroke. Equipped with an automatic shut-off valve to stop overflow. Tethered cap, easy-pour spout prevents messes. Capacity: 7 liters.

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 2" and 2-1/2" seacocks. Diameter: 7.13".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3" and 4" seacocks. Diameter: 9.5".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 3/4" and 1" seacocks. Diameter: 4.29".

Designed to fit between seacock valve flange and ship hull. Rigid enough for a secure installation. Flexible enough to conform to minor hull curvature. 1/2" thickness. Accepts 1-1/4" and 1-1/2" seacocks. Diameter: 5.38".

Cam screws for Jabsco pumps. Pack of three.

Bronze construction. Tolerates hard or soft solids. Pumps in either direction, will not airlock. 1-1/2" ports. Rated for 44.5 gallons per minute.

Cast bronze construction. Diameter: 3/4".

Cast bronze construction. Diameter: 1/2".

Cast bronze construction. Diameter: 3/8".

Cast bronze construction. Diameter: 1/4".

Cast bronze construction. Diameter: 1/8".

Heavy-walled white FDA formula vinyl tubing. Non-toxic, tasteless, odorless. Reinforced with polyester braid. Blue tracer in clear vinyl cover. Appropriate for: Hot/cold pressurized water systems including wash down pump connections, vent and drain lines and head intake - For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 5/8". 250 feet per spool, or sold by the foot.

Replacement for the Johnson 09-808B Only impeller able to run dry for 15 minutes Globe impellers are made of Brandonite a high-strength, elastomeric material with self-lubricating compounds for run-dry protection and improved resistance to sand and dirt to help keep you going in the most difficult conditions.

Johnson gear pump with oil change kit. A light, compact oil change pump. Features: - PTFE body and gears - Oil dip stick extraction tube - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14".

Replaceable wear plate to extend service when handling abrasive fluids
9.5 GPM - 115 Volt Motor - 1/3 HP - 1/2" NIPT
Dimensions: 7-3/4"H x 7-1/4"W x 10-1/2"L

Permanent Oil Drain Hose & Fitting Oil Drain Hose Kit Assembly
Includes drain plug fitting, oil drain hose, and cap/hose hanger clamp.
Oil drain kit: use in conjunction with Jabsco drill pump, model 17215-0000, or PAR hand pump, model 34060-0010.
Drain plug fitting size is 1/2"- 20". Packed in poly bag with display header card. Not recommended for autos with drain plugs exposed

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1-1/8".

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 3/8".

Standard Flow 90 Degree King Nipple 1-1/4" NPT x 1-1/8" hose - Bronze Weight .78 lbs

For use with water strainer. Bronze construction. Diameter: 4".

Guzzler 450 hand pump, plus service kit. Reliable, lightweight hand pump for bilges. Durable and rugged for marine and industrial use. Can accommodate 1-1/4" to 2" hoses. Kit includes extra Buna-N diaphragm and flapper valves. Can move 10 gallons of liquid per minute.

400 series replacement diaphragm. For use with 1-1/2" Guzzler pump.

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 1-1/2" NPT top.

A replacement impeller for various pumps. Suitable for water transfer and engine cooling applications. Made of a self-lubricating material, designed to run dry for up to 15 minutes.
Brass core.
6 blades.
Width: 3/4".
Diameter: 1-9/16".
Color: Blue.

Prevents damage to lines due to rubbing and chafing.
Color: Blue.
1-1/4" filled.
2" flat.

Flappers for rebuilding a valve. For Bosworth hand pumps (1-1/2"). Two nitrile rubber flappers per package.

Johnson gear pump. A light, compact oil change pump. Features: - PTFE body and gears - Self-priming - 8 liter per minute capacity. Size: 5.5" X 3.14". Weight: 2.5 lb.

Replacement impeller for "S" model Pacer pump.
3".