Dimensions: 3/4" X 1-1/2".

Solid brass swivel fittings.
One side is 1" 20 female for a tee connection; other side is 1" 20 male with O-ring and check valve for an appliance connection.
This hose will connect with gas grill adapter tees.
Fully assembled and leak tested.
Length: 12 feet.

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/8".

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/2".

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 1-1/4".

Suitable for diesel, salt or fresh water. Rated for 500 gallons per hour. 3/4" ports. 12 volts.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 5/8".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/8".
Color: White.

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 1-7/8".

For Jabsco pumps. One per bag.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/2".
Color: White.
50 feet per carton.

Allows push-on fitting to install quickly, without tools. Unique spiral angle design and polyester reinforcement. Designed to hold fittings up to 250 psi. Provides smooth, safe performance in harsh conditions. High oil resistance. Diameter: 5/8". Color: Black.

Reliable, rugged diaphragm pump. Portable, lightweight. All Delrin plastic construction. Self-priming. 12 foot delivery suction lift. Horizontal handle orientation. Inlet / outlet diameter: 1-1/2".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 1-1/4".

Designed to be easy to mount and remove in tight spaces. Removable cartridge style. Uses easy-to-install Dura-Port discharge ports. Rated for 750 GPH. Dimensions: 5.75" X 3.2" X 2.82".

Replacement O-ring.

Replacement O-ring.

Replacement O-ring.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 600 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

Guzzler 500 hand pump, with service kit. Reliable, lightweight hand pump for bilges. Durable and rugged for marine and industrial use. Can accommodate 1-1/4" to 2" hoses Kit includes extra Buna-N diaphragm and flapper valves. Can move 15 gallons of liquid per minute.

Black smooth vinyl cover with a helix. Rated for full vacuum. Resistant to chemicals and saltwater. Primarily used for bilge pump and discharge purposes. Easily bent, OK for below waterline connections. Diameter: 1".

Designed for automatic operation with an Ultima switch. Rated for 500 GPH. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting.

A compact, general-purpose pump. Bronze body. Neoprene impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

Sleek, reliable, and compact. Integrated switch. 12 volts. Rated for 1000 GPH. Includes straight and 90° Dura-Port connectors. Has a removable nitrile check valve.

"Full Stroke" Brass Bilge Pumps 7 13 3/4" 22 1/2" 1 3/4" 1" 4 High quality hand bilge pumps: brass cylinders & oil resistant plungers, intake & discharge caps. Includes adjustable mounting brackets for sufficient clearance to easily pump. Meets standards of portable hand bilge: CFR Tile 46, Chapter 1, Subchapter T, Subpart 182.25-10.

Has a high capacity flow rate and horizontal-oriented ports. Rated for 4710 GPH. Self-priming up to 15 feet. Mechanical face type shaft seal. Nitrile impeller. Fitted with single "B" groove pulley. 12 volt.

Neoprene. 8 blades. Dimensions: 3" X 2-9/16". Shaft diameter: 5/8".

Bilge Pro motor cartridge. For 500 gallon per hour pumps.

Marine bronze and stainless steel for reliability. Self-priming. 1-1/4" NPT input. 1" shaft. 1/2" cam.

For Jabsco pumps. Three per bag.

U-bolt style exhaust clamp. 
Secures exhaust tubing. 
Diameter: 7". 

Diameter: 3/4". 50 foot coil.

Oil-resistant construction.
Simple to use for DIY boat owners.
Container is 3.5 gallons.
Includes 8 feet of suction tubing.
12 volt DC.

Standard Flow 90 Degree King Nipple 1/2" NPT x 1/2" or 5/8" hose - Bronze Weight .22 lbs

Nitrile. 8 blades. Diameter: 2-9/16".