Forespar MF 850 ball valve. Molded from high-strength Marelon. Strong, lightweight, and non-corrosive. Controls inlet/outlet needs both above and below waterlines. Body size: 2-3/4" X 4-3/4". Threads: 1" NPT. Weight: .85 lb.

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 20 mm. Size range: 63 - 68 mm, 2-1/2" - 2-11/16".

Stamped brass. Screw end: 1". 25 per container.

Stainless steel. Replacement basket for intake strainer. Diameter: 1-1/4".

Replacement transparent cylinder for strainer. Dimensions: 4-1/2" X 6".

Aluminum. Male 1" to hose.

Cast bronze flange Brass plug Complete with zinc plated steel wrench Weight: 1.25 lbs

Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 1" CTS to 1/2" CTS.

Bronze construction.
Drilled top holes, cast side slots.
NPT thread: 3/4".
Overall size: 1.88" X 1.88".

Brass and rubber construction. Diameter: 7/8". Snap lock handle is adjustable to tighten plug. Sized to fit most bait wells. Display packaged.

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 68 - 73 mm, 2-11/16" - 2-7/8".

Sea Tech 35 series stackable tee connector. Provides an instant zero-leak connection. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 3/8" CTS.

Ideally suited for extreme clamping situations. For high-durometer, multi-wire suction or high pressure hose Built entirely from AISI 316 stainless steel. Features a heavy formed bridge under the bolt. May be used in high-temperature applications. Has a mechanical band interlock instead of spotwelds. Band width: 25 mm. Size range: 73 - 79 mm, 2-7/8" - 3-1/8".

Equipped with a one-way duckbill valve. For use in bilge pump installations. Prevents water siphoning from thru hull. Diameter: 1-1/8".

Thru-Hull Connection for use with hose. Plain Bronze. (Not for use below waterline) Hose size: 2", Flange: 2-3/8", Max hull thickness 2" Back-side of flange is machined to fit hull and grooved to retain bedding compound.

Stainless steel.
Bent at a 30° angle.
Includes an attachment chain so you won't lose the cap.
Marked "Diesel".
Diameter: 1-1/2".

Valve Inlet Non-return 3/4" Fits in pumps suction hose to aid priming & prevent backflow.

Inline Check Valve 1-1/2" Fits in pumps suction hose to aid priming & prevent backflow.

Injection molded ABS Width: 1-7/8" Length: 15-1/2" Color: White.

Inline Check Valve 1" Fits in pumps suction hose to aid priming & prevent backflow.

3-Way Hose Fitting "T" 1-1/8" for Bilge Hose

Injection molded ABS Width: 1-7/8" Length: 15-1/2" Color: Black.

Cast bronze construction. Designed for easy installation and cleaning. Cast lugs on both sides for mounting. Four outside tie rods. Drain plug to remove sediment. Stainless steel strainer basket helps minimize electrolysis. Hinged lugs on cover for easy cleaning of basket. Pipe size: 1/2". Height: 5-3/4".

Prevents particles from entering pump. Cuts down on repairs, easy to install. Transparent housing for quick inspection. 50 mesh stainless steel filter screen. 3/4" hose barb ports.

Prevents particles from entering pump. Cuts down on repairs, easy to install. Transparent housing for quick inspection. 50 mesh stainless steel filter screen. 3/4" hose barb ports, one bottom port for 90° installations.

Injection-molded nylon construction.
Slotted for easy opening.
Includes an attachment chain.
Labeled "Diesel".
Color: Green.

A strong, barrier-lined fuel hose - 3/8". Surpasses permeation guidelines. Includes large primer bulb. Length: 7 feet. Weight: 1 lb.

Injection molded ABS. Cutout size: 3-5/8" X 12-1/8". Overall size: 4-3/4" X 13-1/4". Color: Black.

PVC. Female 1" to MNPT.

Injection molded ABS. Cutout size: 3-5/8" X 12-1/8". Overall size: 4-3/4" X 13-1/4". Color: White.

Brass and rubber construction. Diameter: 3/4". Snap lock handle is adjustable to tighten plug. Sized to fit most bait wells. Display packaged.

Injection molded ABS. Dimensions: 2-13/16" X 3-5/8". Hose / hole size: 3".

Body only. Does not come with a cap.
Stainless steel.
Diameter: 1-1/2".

Hardware for installing Moeller fuel tanks. Includes: - Fill hose - Vent hose - Thru hull - Deck plate fuel fill - Hose clamps.

For 1673, 777 series pumps. Used with seal spacer and O-ring on pump shaft. Diameter: 1-1/8".