Flush mounted. Stainless steel. Diameter: 5/8".

Diameter: 1-1/2".

Cam screws for Jabsco pumps. Pack of three.

For 34600 series pump. Includes belt, diaphragm, and valve set.

Aluminum. Female 1-1/2" to MNPT.

Hull strainer with access door. Bronze construction. Makes it easy to access thru-hull and seacocks. Maximum thru-hull length: 2". Dimensions: 10.25" X 4.38" X 1.63".

Display for drains and plugs. Injection molded nylon. Fasteners: #8. Dimensions: 2-3/16" X 2-3/16" X 1-1/8".

Aluminum. Female 3" to FNPT.

Three per bag.

Strains debris and particles from bilge pump line. Clear plastic housing for easy inspection. Easy to disassemble and clean. 16 mesh stainless steel screen. 3/4" hose barb ports.

PVC. 1-1/4" dust cap.

Uses turbine technology to produce a powerful flush. Compact size but very efficient. Very quiet. Leaves a clean bowl after every flush. Dimensions: 17.5" X 14.6" X 11.6". 24 volt.

High impact plastic construction. Will not rust, corrode or discolor. Designed for use with Rule pumps. Size: 3/4".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 1-1/2".

Stainless steel cable, ring and fittings. For 1-1/2" deck fills.

Keeps debris from entering your pump. Plug-in Quad port. Threaded bowl makes cleaning easy. 40 mesh, stainless steel screen. 3/4" hose barb.

Fire hose fog nozzle. Polycarbonate construction. Adjustable combination fog and stream nozzle. Virtually indestructible and nearly weightless. Perfect for pin racks and single jacket hoses. Size: 1-1/2", NST threads. Weight: .4 lb.

Reducing hose adapter. 1" to 1-1/2".

Sea Tech 35 series tube support liner. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 3/8". Weight: .02 lb.

Aluminum. Female 3" to hose.

Thru-Hull Connection for use with hose. Plain Bronze. (Not for use below waterline) Hose size: 1-1/8", Flange: 2-3/8", Max hull thickness 1-7/8" Back-side of flange is machined to fit hull and grooved to retain bedding compound.

Heavy-duty for hot or cold water systems. Extra wall thickness increases kink resistance. FDA-approved virgin vinyl compound. Diameter: 3/8".

Service kit for WS-63 with diaphragm. Includes: - WSP-63/16 Rubber washers - WSP-63/27 packing gland parts. Weight: .25 lb.

Hose barb to hose barb adapter. "A real problem solver." Connects marine hoses easily and securely. Dimensions: 1-1/8" to 1".

2 stage self-venting cap.
Designed for easy and stable storage, even in tight places.
EPA-compliant; meets ABYC/NMMA/CARB requirements.
Capacity: 9 gallons.

Bronze construction. Thread size: 1/2". Plug only. Display packaged.

Nitrile thermoplastic laminate (NTL) tube.
Reinforced with multiple high tensile textile spirals.
Covered with black OZO.
Formulated for gasoline, diesel and alcohol.
Flame-resistant, designed for engine compartments.
Meets all requirements of USCG, NMMA, ABYC.
Size: 5/16".

PVC. Female 3" to hose.

Sea Tech 35 series reducing stem connector. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 1" CTS to 1/2" CTS. Weight: .05 lb.

Sea Tech 35 series reducing stem connector. Manufactured from lead-free high-performance polysulfone. The quick-connect design installs easily, without tools. Size: 1" CTS to 3/4" CTS. Weight: .07 lb.

Aluminum. 1-1/4" dust cap.

Features a slotted cap which requires a key to open and close for extra security.
These fills contain no metal and do not require grounding.
Nylon construction.
1-1/2" connection.
Green cap: marked "Diesel".

Display packaged.

Toilet base assembly for Jabsco toilets. Includes all needed installation hardware.

Bronze thru-hull - extra long. Machined finish, complete with flange nut. Cast bronze. Stem length under flange: 5-9/16". Flange diameter: 2". Weight: .8 lb.

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 3/4".

Solenoid for vented loop (29015). For use with electric toilets. Must be wired in parallel with toilet motor.