Includes: - One cover gasket - Two cork cylinder gaskets. For use with #4 and #5 water strainers.

Cover bolt, wing-nut and washer. For use with 493 series water intake strainers. Fits models 4 and 5 only. Bolt length is 1-7/8".

Includes impeller, O-rings and seals.

Thru-Hull Connection for use with hose. Plain Bronze. (Not for use below waterline) Hose size: 5/8", Flange: 1-5/8", Max hull thickness 1-1/4" Back-side of flange is machined to fit hull and grooved to retain bedding compound.

For Jabsco manual pump toilet #29090. Includes gaskets and hardware.

Replacement pump end cover, for Jabsco pump, model 2760.

For hydraulic systems. Copper alloy wetted parts. Lower mount process connection. Displays 0 - 5000 psi.

Stamped 304 stainless Diameter: 4" Weight: .16 lb

Cast bronze. Diameter: 1-1/4".

Stamped 304 stainless Length: 5" Width: 4-5/8" Weight: .35 lb

Stamped 304 stainless Length: 5" Width: 9" Weight: .4 lb

PVC. Male 1-1/4" to hose.

Hydraulic Test Pressure 1/2" Carbon steel 1-piece body - Reduced bore. Blowout-proof stem - Screwed ends. Hi-Press Ball Valves (Steel or SS) 1/2 Steel 2,000 PSI

Brass and rubber construction. Diameter: 3/8". Snap lock handle is adjustable to tighten plug. Sized to fit most bait wells. Display packaged.

Hydraulic Test Pressure 3/4" Carbon steel 1-piece body - Reduced bore. Blowout-proof stem - Screwed ends. Hi-Press Ball Valves (Steel or SS) 3/4 2,000 PSI

Vent cap assembly for Forespar vented loops. "Duck bill" style. Commonly used in marine toilet or engine cooling systems. Molded from corrosion-proof Marelon. Manufacturer number: 903002 MF-841.

Gives structural stability in valve / thru-hole locations. Bottom port has straight threads to mate with thru-hulls. Top port has tapered threads to mate with ball valves. Use where in-line valves have been used as seacocks. Size: 2". Weight: 2.04 lbs.

For Jabsco impeller pump, model 9040.

Vented loop assembly. Commonly used in marine toilet or engine cooling systems. A valve at the top of the loop allows air to enter line when system isn't in use, but seals when fluid is present. Molded from corrosion-proof Marelon. Manufacturer number: MF 844 903007. Barb size: 1". Dimensions: 7" X 9". Weight: .8 lb.

Schedule 80 PVC construction. Diameter: 1". Length: 5".

1-1/2". Plastic.

Aluminum. Male 1-1/4" to MNPT.

Vented loops are anti-siphon safety devices. For use with both manual and electric marine toilets. Plastic construction. Diameter: 3/4". Weight: .2 lb.

Cast bronze. Diameter: 1-1/2".

Replacement O-ring for a Pacer "S" series pump.

Sea Tech elbow clip mount. Bends and secures polyethylene tubing at a 90° angle. For 1" tubing. Mounts to wall or bulkhead with a single screw.

Stainless steel. Replacement basket for intake strainer. Diameter: 2".

Cast bronze. Complete with #1248 key and O-ring. Pipe size: 2". OD flange: 4-1/4".

Cast bronze. Complete with #1248 key and O-ring. Pipe size: 2-1/2".

Replacement part for series 6050, 6850, 43210.

Secures Sea Tech quick-connect tubing fittings. Simply slips into the small gap on each fitting. Ensures that your tubing will stay secure when jostled. For use with 1" CTS tubing.

Secures Sea Tech quick-connect tubing fittings. Simply slips into the small gap on each fitting. Ensures that your tubing will stay secure when jostled. For use with 3/8" CTS tubing.

For Johnson pumps. Brass construction.

Aluminum. Male 1-1/4" to hose.

Chrome plated zinc alloy Black plastic cap Deck plate key, O-ring and integral retainer on cap included Cap has a slot between the holes Ground wire required Marked for: Diesel