Injection Molded Nylon For 5/8" hose Weight: .05 lb

Used with Jabsco vane pump 45710. Includes seals, impellers, and hardware.

Schedule 80 PVC construction. Diameter: 3/4". Length: 1-1/2".

Bronze construction. Thru-hull fitting with grounding nut. Diameter: 1".

Schedule 80 PVC construction. Diameter: 3/4". Length: 5".

For 2620 and 2630 series Jabsco pumps. Includes impeller, gasket, lip seal.

Cast bronze. Diameter: 2".

Cast bronze. Diameter: 2-1/2".

Black plastic with gasket Built in lock cylinder Weight: .1 lb

PVC construction. Size: 1-1/4" X 3/4".

PVC construction. Size: 1-1/4" X 1".

Machined bronze. Replacement plug for garboard drain.

Brass construction. Tightens with a snap handle. Diameter: 1".

Brass and rubber construction. Diameter: 7/8". Snap lock handle is adjustable to tighten plug. Sized to fit most bait wells.

Brass and rubber construction. Diameter: 1".

Stainless steel / nitrile rubber.
A twist-turn plug that creates a leak-proof seal.
Corrosion and vibration resistant.
Diameter: 1".

Nylon construction. Dimensions: 3-1/4" X 4-3/4".

Nylon construction.
Designed with a molded-in recess in the base.
Provides a watertight seal.

SecureStack fuel tank - 6 gallon. "An innovative tank for today' boater." Ergonomic-designed, stackable, EPA compliant. The answer to your fuel handling problems.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Aluminum. 3" dust cap.

Fuel tank tie-down strap kit. Includes: - Two 68" nylon straps - Four stainless steel tie-downs - Eight stainless steel mounting screws. Weight: .2 lb.

Stamped 304 stainless Dimensions: 1-5/8" x 1-3/4" Weight: .01 lb

Stamped 304 stainless Dimensions: 2-1/4" x 2-1/8" Weight: .03 lb

Stamped 304 stainless Length: 7" Width: 5-3/4" Weight: .58 lb

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 5/8".
Color: White.

Cast bronze Hose size: 1-1/4" - Length: 4-1/2" - Width: 2-3/4" Weight: 1.375 lb

Stamped 304 stainless Length: 7-1/2" Width: 6-3/4" Weight: .79 lb

Smooth cover, clear PVC with white vinyl helix. Rated for full vacuum. Resistant to mild chemicals and saltwater. Used for: - Bilge pump intake and discharge - Livewell intake and drain - Sanitation: intake, vent and pump out. Designed for connections below the waterline. Not for use in pressurized systems or with antifreeze. Diameter: 3".

PVC. Male 1-1/4" to MNPT.

Labeling kit for marine manifolds. Great for labeling your SeaTech manifold.

PVC. 3" dust cap.

Cast bronze construction. Designed for easy installation and cleaning. Cast lugs on both sides for mounting. Four outside tie rods. Drain plug to remove sediment. Stainless steel strainer basket helps minimize electrolysis. Hinged lugs on cover for easy cleaning of basket. Pipe size: 3/4". Height: 8-3/8".

Washdown water outlet. Cast from 316 stainless steel. Allows for garden hose hookup to onboard water system. Standard male hose connector. Requires a separate ball or gate valve to regulate flow. 1/2" FIPT X 3/4 MGHT. Weight: .32 lb.

For Jabsco pump. Includes impeller, gasket, hardware.

For pedestal-mount pump. Includes impeller, gasket and hardware.

For Perko raw water strainers. Includes 1/2" and 3/4" gaskets. For #4 and #5 strainers.