Provides ultimate pumping performance and fully automatic operation.
Designed to help keep your boat clear of nuisance water.
Equipped with a powerful 800 GPH high-capacity pump.
Tough impact-resistant sealed polycarbonate lid.
3/4" discharge port.
Simple to install.

For venting bilge gases and fumes.
PVC hose supported by helical wire.
Resistant to ozone, sunlight and weathering.
Will not support a flame.
Diameter: 4".

Nitrile. 6 blades. Diameter: 2".

Neoprene. 6 blades. Diameter: 2".

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 1-1/2".

A multi-purpose hand pump kit. Brass and neoprene construction. Corrosion resistant. Great for draining or filling engine and gearbox oil. Rated for up to 1-1/2 GPM output. Includes: - Pump - Two 1/2" hoses, 3 feet length - Two dipstick probes, 1/4" and 5/16" - Connector and adapter for 1/2" hose. Not designed for pumping flammable liquids.

Size: 1/2".
For hose connections.
Two per package.

Includes: - 3 feet of 1/2" hose - Probe adaptor - 1/4" X 40" dipstick probe - Utility pump. Kit has same utility pump as 17250-0003. Packed in poly bag with display header card.

Diameter: 1/2". 50 foot coil.

King Nipple - Straight Standard Flow 3/4" NPT x 3/4" hose - Bronze Weight .20 lbs

FC Tournament Series pump.
For seacock applications.
3/4" intake.
3/4" discharge hose.
Flow rate: 800 GPH.
12 volts.

Heavy-walled FDA-approved vinyl compound.
Reinforced with polyester braid.
Non-toxic, tasteless, odorless.
Red tracer in clear PVC.
Appropriate for:
- Hot/cold pressurized water systems
- Vent and drain lines
- Bilge pump discharge.
For temperature range: 25° F - 150° F.
Rated for a burst pressure of 250 psi.
Size: 1/2".

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 30 feet.
UL listed.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 25 feet.
UL listed.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 20 feet.
UL listed.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1".

Propane / liquid petroleum gas (LPG) supply hose. Thermoplastic construction. Both ends are 3/8" female flare fittings. Length: 15 feet.

High pressure LPG hose with solid brass.
3/8" female swivel flare fittings on each end.
Many people prefer to use hose over copper supply line tubing in their LP gas installations, because it won't corrode, or develop stress fatigue cracks.
Fully assembled and leak tested.
Length: 10 feet.
UL listed.

Brass construction.
3/4" to close.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/4".

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/2".

304 stainless steel. Tee pipe fitting. Size: 2" NPT.

Designed to connect wall-mounted regulators
to LPG gas cylinders with Type I valves.
One end has a 1/4" male inverted flare fitting.
Other end has a thermoplastic QCC nut for quick and easy hand tight connection.
The "new-style" QCC connection will not allow any gas to flow through unless properly connected, and has a heat-sensing fail-safe feature that shuts off all gas flow if the the temperature reaches 2400° to 3000° F. Additionally, a controlled-flow device will activate in the case of a downstream gas system break (activates at 200 cubic feet / hour).
Fully assembled, leak-tested, and UL listed.
Length: 20".

Replacement for the Jabsco 6056-0003 impeller.
Globe's RED Run-Dry impellers are specially designed to withstand diesel fuel and engine oil without swelling.
Made from a high-strength, elastomeric material with self-lubricating compounds for run-dry protection and improved resistance to sand and dirt.
Able to run dry for 15 minutes.

Has some of the most advanced features in the industry. Automatic operation, with a non-clogging electric float. Removable motor cartridge for cleaning and replacement. Rated for 750 GPM. Equipped with easy-to-install Dura-Port discharge ports. 3/4" fitting. Dimensions: 3" X 4" X 4.4".

Investment cast 316 stainless steel Comparable to Jabsco 50070 - 0200 Allows easier removal of flexible impellers from a pump Weight: 1.04 lb

Bronze impeller pump. Can handle small bilge debris. Flow rate: 8 GPM. 12 volts.

For sanitation system connections. Multi-purpose, smooth-walled hose. For bilge, drain, or potable water uses. Temperature range: -13° to 158° F. Diameter: 1-1/8".

For Jabsco pumps. Three per bag.

5 feet long.
High-pressure rated.
3/8" female swivel flare end fittings.
UL 21 listed.

For Jabsco 17954-0001. Designed to run dry for 15 minutes. Dimensions: 2-5/8" X 2". 3/4" shaft diameter.

Heavy-walled FDA-approved vinyl compound. Reinforced with polyester braid. Non-toxic, tasteless, odorless. Red tracer in clear PVC. Appropriate for: - Hot/cold pressurized water systems - Vent and drain lines - Bilge pump discharge. For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1-1/4".

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

Neoprene. 9 blades. Diameter: 2".