Pump with neoprene impeller Bronze body - Stainless steel shaft Stainless steel lip or mechanical seals for shaft Shielded ball bearings - 1" IPT Weight: 6.2 lbs

Heavy-walled white FDA formula vinyl tubing. Non-toxic, tasteless, odorless. Reinforced with polyester braid. Blue tracer in clear vinyl cover. Appropriate for: Hot/cold pressurized water systems including wash down pump connections, vent and drain lines and head intake - For temperature range: 25° F - 150° F. Rated for a burst pressure of 250 psi. Size: 1/2". Sold by the foot.

Cast aluminum king combination nipples. Hose diameter: 1/2" Thread size: 1/2"

Cast aluminum king combination nipples. Hose diameter: 3/4" Thread size: 3/4"

Automatic bilge pump.
1-1/8" discharge outlet.
Senses when bilge water reaches 2-3/4".
12 volt DC.
Rated for 1100 GPH.

A compact pneumatic bladder tank for small water systems. Smoothes water flow and eliminates pulses. Pressurized tank is rated to 20 PSI. Mounts easily in any position. Includes snap-in barbed or threaded hose fittings. Diameter: 4-3/4" Height: 13-1/4".

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.
50 feet per box.

Bronze body. 1-1/2" ports. Rated for 73 gallons per minute. 1" shaft.

Original Johnson Pump Style Pump 62 GPM F8B8 Bronze body, stainless steel shaft, 1-1/4" ports, 1"shaft keyd. Mounted shaft with perm. Lubricated double ball bearings. Mechanical seal, neoprene impeller.

Single-layer, corrugated polyethylene hose.
Resistant to mild chemicals and salt water.
Has a clamping cuff every foot.
This hose is primarily used for bilge pump discharge.
Diameter: 3/4".
Color: Black.

Cast bronze Cast hex for easier installation Curved 90 degrees Pipe Size: 1-1/2" Hose Size: 1-1/2" Overall Length: 6" Weight: 1.4 lbs

Accumulator Tank Accumulator Tank Pneumatic accumulator tank for smooth flow from faucets & shower. Reduces pump cycling. Eliminates pulsations & water hammer. Water separated from air chamber by diaphragm & polypro tank liner. Tank volume: 2 gallons with working water volume of about 1 gallon. Mounts horizontally or vertically, even upside down. Port is 3/4" NPT (male). Includes brackets & band clamps. Pre-pressurized to 20 psi. Tank may be fine tuned to cut-in pressure of pump. Diameter: 8" (203mm). Height: 12 5/8" (320mm. Weight: 5 Lb. (2.3 kg). Max working pressure 100 PSI: (690 kPa).

For Jabsco pumps. Three per bag.

Neoprene. 8 blades. Diameter: 1-1/4".

Nitrile. 8 blades. Diameter: 1-1/4".

Triangular flange base. Features a field-reversible handle. Handle has a square hole to accept a standard ratchet. Stainless steel handle and hardware. 2" NPT top.

King Nipple - Straight Standard Flow 1" NPT x 1" hose - Bronze Weight .26 lbs

Stainless steel. Diameter: 2".

Fire retardant marine fuel hose. Designed for use with alcohol-enhanced gasoline. Reinforced with 2 spirals of high-strength synthetic fabric. Helical wire imbedded between fabric for kink resistance. Diameter: 2-3/8".

Dimensions: L 16" W 12" H 8" Weight: 7 lb

304 stainless steel. Tee pipe fitting. Size: 1/2" NPT.

A compact multi-purpose hand pump kit. Great for many draining and liquid transfer jobs. Small enough to fit in a tool or tackle box. Includes: - Pump - 2" hose - Draw tube for draining crankcases.

304 stainless steel. Tee pipe fitting. Size: 1/4" NPT.

Cast bronze These valve bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls Flange Diameter: 4-3/8" Pipe Size: 1" Weight: 2.5 lbs

Neoprene. 6 blades. Diameter: 1-9/16".

Designed for the tough demands of the fishing industry. Equipped with a liquid-cooled 12-pole motor. Features a mechanical shaft seal and a threaded port. Uses 1-1/8" and 1-1/4" ports. Rated for 2200 GPH.

Sliding Vane Diesel Pump VR050 Diesel Refueling 24V 1" 1" Hose 5-1/4" 5" 8-1/2" 11 Lbs. Continuously rated diesel pump - 13.7 GPM at 10 ft. total head. Self priming up to 9.6 ft. vertical lift. Optional fitted switch, fuse & ports. 22° F to 104° F operating temp range.

304 stainless steel. Tee pipe fitting. Size: 3/4" NPT.

304 stainless steel. Tee pipe fitting. Size: 3/8" NPT.

Nylon pump body. Nitrile valves and diaphragm. Rated for 3.5 gallons per minute. 1/2" port, 3/4" hose output. 12 volt DC.

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain line. Not recommended for hot water. Diameter: 1/2".

Single layer vinyl, non toxic clear tubing. FDA approved. Useful for sink, cooler, or livewell drain lines. Not recommended for hot water. Diameter: 1/4".

Unites two lengths of hose. Stainless steel. Diameter: 1-1/4".

Unites two lengths of hose. Stainless steel. Diameter: 1-1/2".

Fuel filter kit with clear bowl. Allows for visual inspection of water build-up. Lightweight housing mounts easily to bulkheads. Pitcock valve allows drainage without filter removal. Weight: 1.6 lb.

Stainless steel. Diameter: 1-1/4".