Radex radiator hot water forced air heater is designed to efficiently use the waste water heat produced by a water cooled engine, or a hot water system, to generate air heat.
Stainless steel construction minimizes maintenance and is highly resistant to corrosion.   
Ideal for a variety of applications including boats, RV's, trucks or cars.
Easy to install.
Side mount or frame mount available.
Equipped with two, independently switched high efficiency 12V DC fans.
24000 BTU output.
Dimensions: 16.75"W x 7"H x 5"D.

Conversion kit for propane heater. Allows the use of disposable 1 lb. propane bottles.

Dickinson stove top, complete with lid. Cast iron construction. For Dickinson Bristol diesel stoves.   Part # 07-060. Weight: 25 lbs.
NOTE: This is the cast iron top for stoves made after 1986.  For stoves made pre-1986, the sea rail, backsplash and flue collar would also have to be updated.

Oil Metering Valve '3S'. Diesel oil metering valve. For Adriatic, Antarctic, Bering, Lofoten, Pacific stoves. Part # 02-004. Weight: 1.2 lbs.

Stainless steel construction. Old-style, with tabs. Fits Dickinson stoves. Size: 5". Part # 08-010.

Dickinson steel flue collar. Stainless steel construction. Fits Lofoten and Bristol stoves. Size: 4". Part # 08-020

Aluminum construction. Fits Pacific, Atlantic, Bering, Adriactic, Beaufort stoves. Size: 5". Part # 08-000.

Stainless steel construction. Fits Newport, Alaska, and Antarctic stoves. Size: 3". Part # 08-030.

Dickinson lid lifter for diesel stoves.
Allows user to lift many kinds of lids.
Aluminum construction.
Part # 14-000.

High-temperature shut off solenoid kit. For use with 5" flue. Designed to shut off fuel oil supply if the probe's temperature exceeds a pre-set limit. Does not require power. Kit includes: - Solenoid - Fittings - Mounting bracket - Probe and capillary tube.

Floor mounted heater. Uses safe, economical diesel fuel. Includes 12 volt one turn hot water coil. Heating and optional hot water from a single appliance. Dimensions: w 13" x h 25" x d 14" A 12V assist fan is standard, 24V or 32V optional. Heat output: 6500 - 16250 BTU. Net Weight: 27 lbs - Shipping Weight: 30 lbs

Floor mounted heater. Uses safe, economical diesel fuel. Heating and optional hot water from a single appliance. Dimensions: w 8.75" x h 20.5" x d 10" A 12V assist fan is standard, 24V or 32V optional. Heat output: 6500 - 16250 BTU. Net Weight: 20 lbs - Shipping Weight: 22 lbs

Natural draft direct-vent heater/fireplace. Stainless steel construction. Rated for high temperature use. Large ceramic glass flame-viewing window. Safe operation with airtight combustion chamber. Variable heat output, excellent thermal efficiency. Low fuel consumption. Includes blower fan to enhance air circulation. Heat output: 7000 - 9700 BTU. Flue size: 2.5". Dimensions: w 10" X h 16" X d 7.25". Weight: 25 lbs.

Dickinson mica window. Naturally heat-resistant. Easily shaped and cut to fit. Part # 05-050. Size: 4" x 6". Weight: .1 lbs.

Six screws and clips. For stove top installations.

Dickinson glass window. Heat-resistant and clear. For Dickinson Newport heaters. Part # 05-070. Size: 5-1/8" x 4-5/8". Weight: .1 lbs.

Natural draft direct-vent heater/fireplace. Stainless steel construction. Rated for high temperature use. Large ceramic glass flame-viewing window. Safe operation with airtight combustion chamber. Variable heat output, excellent thermal efficiency. Low fuel consumption. Includes blower fan to enhance air circulation. Heat output: 5500 - 7500 BTU. Flue size: 2.5". Dimensions: w 8.5" X h 14" X d 5.5".

Includes resistor unit and wiring diagram.

Designed for use in 24 volt systems.

Includes resistor unit and wiring diagram.

Designed for use in 32 volt systems.

Dickinson sea rail for Bristol diesel stove Secures items on stovetop from falling. Easily installed. Part # 09-040. 1.9 lbs.

Stainless burner for Spitfire 180 marine BBQ
A replacement barbecue burner
Part number: #15-063.

For larger (45-60 foot) vessels.
Features a double insulated stainless steel surface.
Includes a 12 volt two turn hot water coil.
Flue size: 5".
Burner size: 7" 'Breeze'.
Overall dimensions: w 30.5" X h 28.75" X 23".
Oven size: 16" X 14.5" X 12".
A 12V assist fan is standard, 24V or 32V optional.
Heat output: 8125 - 24375 BTU.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.

Please call 1-800-426-2783 for further information.

Dickinson "Caribbean" propane galley range.
Features:
- Three efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Thermostatically-controlled oven and broiler
- Includes pot holders and removable cutting board.
Dimensions: 20.375" X 21.75" X 14.75".
Net Weight: 70 lbs.
Shipping Weight: 115 lbs

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Wall mount.
Two-stage.
Two 300 PSI gauges.
UL listed; meets ABYC standard.

Replacement split-top top burner ring. Cast iron. Fits Atlantic and Beaufort stoves. Part # 04-070. Size: 7". Weight: 3 lbs.

Replacement bottom burner ring. Stainless steel. Fits Atlantic and Beaufort stoves. Part # 04-050. Size: 7". Weight: .5 lbs.

Dickinson pot holders for diesel stovetops. Secures pots on Adriatic, Bering, and Pacific stoves. Stainless steel construction. Part # 11-000. Weight: .5 lbs.

Designed to remain constantly ON and monitoring, even when other parts of the LP gas system are off.
Will send an alarm signal to LP gas detection panel when LP gas is present at 10% LEL (Lower Explosion Limit) or more.
Marine UL listed.
Connects with a quick-connect cable (1300-7721-120; 1300-7721-240) to LP gas panels (1300-7760; 1300-7761-KIT).
Dimensions: 2" X 3.5" X 0.75".

Oil Metering Valve '3D'. Diesel oil metering valve. For Adriatic, Antarctic, Bering, Lofoten and Pacific stoves. Part # 02-000. Weight: 1.2 lbs.

Oil Metering Valve '4D'. Diesel oil metering valve. For Atlantic stoves. Part # 02-001. Weight: 1.2 lbs.

Oil Metering Valve '5D'. Diesel oil metering valve. For Beaufort stoves. Part # 02-002. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Alaska and Newport stoves. Part # 02-011. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Bristol stoves. Part # 02-012. Weight: 1.2 lbs.

Dickinson reamer rod for diesel stoves. Great for all reaming applications. Steel construction. Part # 14-070. Weight: .3 lbs.

High-temperature shut off solenoid kit. For use with 3" flue. Designed to shut off fuel oil supply if the probe's temperature exceeds a pre-set limit. Does not require power. Kit includes: - Solenoid - Fittings - Mounting bracket - Probe and capillary tube. Weight:

High-temperature shut off solenoid kit. For use with 4" flue. Designed to shut off fuel oil supply if the probe's temperature exceeds a pre-set limit. Does not require power. Kit includes: - Solenoid - Fittings - Mounting bracket - Probe and capillary tube. Weight: