Oil Metering Valve '3D'. Diesel oil metering valve. For Adriatic, Antarctic, Bering, Lofoten and Pacific stoves. Part # 02-000. Weight: 1.2 lbs.

Oil Metering Valve '4D'. Diesel oil metering valve. For Atlantic stoves. Part # 02-001. Weight: 1.2 lbs.

Oil Metering Valve '5D'. Diesel oil metering valve. For Beaufort stoves. Part # 02-002. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Alaska and Newport stoves. Part # 02-011. Weight: 1.2 lbs.

Oil Metering Valve '3D'. Diesel oil metering valve. For Bristol stoves. Part # 02-012. Weight: 1.2 lbs.

Used with LP gas detector unit and panel.
Simple to install.
Length: 10 feet.

Brass construction. Size: 1/8" X 1/4".

High-strength fiberglass composite.
Type 1 valve.
OPD, DOT and TC approved.
See-thru feature for level of LP gas.
LP gas capacity: 4.2 gallons.
1260 cubic inch volume.

Replacement middle leg burner ring. Cast iron. Fits Atlantic and Beaufort stoves. Part # 04-060. Size: 7". Weight: 2.5 lbs.

Bulkhead-mounted heater for 30 - 36 foot boats Uses safe, economical diesel fuel. Small, compact. Stainless steel with a decorative valve cover. Heating and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Dimensions: w 8.5" X h 19.75" X d 10.5". Heat output: 6500 - 16250 BTU. Flue size: 3". Weight: 22 lbs.

A very compact low-pressure regulator.
Comes fully assembled and leak-tested.
Consists of a solid brass male POL cylinder fitting and street tee; a low-profile, watertight, stainless steel gauge; and a UL listed die-cast zinc body, with a 3/8" FPT outlet.
Designed to be tank-mounted.
Single port, single stage.
Gauge is rated for up to 300 PSI.
Meets ABYC marine standards (LPG System Leak Test 1).
Dimensions: 2.13" X 4.5" X 1.63".

Floor mounted heater for 36 - 40 foot boats. Uses safe, economical diesel fuel. Heating, cooking, and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Cast iron lid provides a fine cooking surface. Dimensions: w 10.75" X h 18" X d 17". Heat output: 6500 - 16250 BTU. Flue size: 4". Net Weight: 25 lbs - Shipping Weight: 35 lbs

For medium boats (36 - 42 foot).
Most popular model.
Features a double-insulated outer surface.
Flue size: 5".
Burner size: 6" stainless steel 'Airflow'.
Overall dimensions: w 21.75" X h 23.5" X d 21.5".
Oven size: 10" X 13" X 10.5".
A 12V assist fan is standard, 24V or 32V optional.
Heat output: 6500 - 16250 BTU.
Net Weight: 110 lbs.
Shipping Weight: 156 lbs.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Dickinson insoline cement. For Dickinson Marine heaters and stoves. Adheres to fire bricks and metals. High-temperature resistant. Simply mix with water for installation or repairs. Use for: metal to metal, metal to masonry. Weight: 5 lbs.

Fire brick for Dickinson stoves. Medium duty, insulates combustion chamber. Part # 05-000. Weight: .5 lbs

Dickinson glass window. Heat-resistant and clear. For all Dickinson diesel oil stoves. Part # 05-065. Size: 3-3/8" x 3-3/8". Weight: .1 lbs.

Dickinson heat-resistant Hybond cement.
Air setting "Super 3000 Hybond sealant."
For use with Dickinson oil stoves and heaters.
Max joint thickness: 1/8" Sets at room temperature in 24 hours.
Use on: brick to brick, metal to brick, metal to metal.
Part # 05-040.
Size: 500 ML.

Dickinson propane galley range.
Features:
- Two efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Includes pot holders and removable cutting board.
Overall Dimensions: w 23" X d 14" X h 4.75".
Counter Cutout: w 21.5" X d 12.5" X h 4.25".

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Galvanized steel.
Adjustable elbow - 90°.
26 gauge.
Diameter: 6".

The Artis Metals Company's flagship vent cap. For use with fossil fuel chimneys. Designed to prevent downdraft and poor draws created by wind Cap creates a vacuum, which pulls fumes out of the pipe cap. Galvanized steel. Size: 4".

The Artis Metals Company's flagship vent cap. For use with fossil fuel chimneys. Designed to prevent downdraft and poor draws created by wind Cap creates a vacuum, which pulls fumes out of the pipe cap. Galvanized steel. Size: 3".

The Artis Metals Company's flagship vent cap. For use with fossil fuel chimneys. Designed to prevent downdraft and poor draws created by wind Cap creates a vacuum, which pulls fumes out of the pipe cap. Galvanized steel. Size: 6".

Galvanized steel.
Dimensions: 5" X 24".
26 gauge.

Galvanized steel.
Dimensions: 8" X 24".
26 gauge.

Dickinson flue guard. Stainless steel construction. Prevents heat damage to nearby objects. Dimensions: 5" X 22". Part # 18-030 Weight: 1.5 lbs

Internally-braced, heavy-duty triangle turbine roof vent. Made from thick galvanized steel. Features a long-lasting jewel bearing system. Size: 4"

Internally-braced, heavy-duty triangle turbine roof vent. Made from thick galvanized steel. Features a long-lasting jewel bearing system. Size: 6"

The Artis Metals Company's flagship vent cap. For use with fossil fuel chimneys. Designed to prevent downdraft and poor draws created by wind Cap creates a vacuum, which pulls fumes out of the pipe cap. Galvanized steel. Size: 5".

Galvanized steel construction. Diameter: 5".

Galvanized steel construction. Diameter: 6".

Galvanized steel construction. Diameter: 4".

Galvanized steel. 
Dimensions: 5" X 24". 
26 gauge.

Galvanized steel. 
Adjustable elbow - 90°. 
26 gauge. 
Diameter: 4".

Galvanized steel. 
Dimensions: 6" X 24". 
26 gauge.

Dickinson barometric draft damper kit. Install on flue pipe 12" to 20" above unit. Required to stabilize draft. Dimensions: 3" x 7". Part # 16-010. Weight: .4 lbs.

Dickinson flue guard. Stainless steel construction. Prevents heat damage to nearby objects. Dimensions: 3" X 22". Part # 16-030. Weight: 1.2 lbs.