Replacement bottom burner ring. Stainless steel. Fits Atlantic and Beaufort stoves. Part # 04-050. Size: 7". Weight: .5 lbs.

Dickinson pot holders for diesel stovetops. Secures pots on Adriatic, Bering, and Pacific stoves. Stainless steel construction. Part # 11-000. Weight: .5 lbs.

Conversion kit for propane heater. Allows the use of disposable 1 lb. propane bottles.

Dickinson stove top, complete with lid. Cast iron construction. For Dickinson Bristol diesel stoves.   Part # 07-060. Weight: 25 lbs.
NOTE: This is the cast iron top for stoves made after 1986.  For stoves made pre-1986, the sea rail, backsplash and flue collar would also have to be updated.

Oil Metering Valve '3S'. Diesel oil metering valve. For Adriatic, Antarctic, Bering, Lofoten, Pacific stoves. Part # 02-004. Weight: 1.2 lbs.

Stainless steel construction. Old-style, with tabs. Fits Dickinson stoves. Size: 5". Part # 08-010.

Dickinson steel flue collar. Stainless steel construction. Fits Lofoten and Bristol stoves. Size: 4". Part # 08-020

Aluminum construction. Fits Pacific, Atlantic, Bering, Adriactic, Beaufort stoves. Size: 5". Part # 08-000.

Stainless steel construction. Fits Newport, Alaska, and Antarctic stoves. Size: 3". Part # 08-030.

Dickinson lid lifter for diesel stoves.
Allows user to lift many kinds of lids.
Aluminum construction.
Part # 14-000.

High-temperature shut off solenoid kit. For use with 5" flue. Designed to shut off fuel oil supply if the probe's temperature exceeds a pre-set limit. Does not require power. Kit includes: - Solenoid - Fittings - Mounting bracket - Probe and capillary tube.

Floor mounted heater. Uses safe, economical diesel fuel. Includes 12 volt one turn hot water coil. Heating and optional hot water from a single appliance. Dimensions: w 13" x h 25" x d 14" A 12V assist fan is standard, 24V or 32V optional. Heat output: 6500 - 16250 BTU. Net Weight: 27 lbs - Shipping Weight: 30 lbs

Floor mounted heater. Uses safe, economical diesel fuel. Heating and optional hot water from a single appliance. Dimensions: w 8.75" x h 20.5" x d 10" A 12V assist fan is standard, 24V or 32V optional. Heat output: 6500 - 16250 BTU. Net Weight: 20 lbs - Shipping Weight: 22 lbs

Dickinson sea rail for Bristol diesel stove Secures items on stovetop from falling. Easily installed. Part # 09-040. 1.9 lbs.

Radex radiator hot water forced air heater is designed to efficiently use the waste water heat produced by a water cooled engine, or a hot water system, to generate air heat.
Stainless steel construction minimizes maintenance and is highly resistant to corrosion.   
Ideal for a variety of applications including boats, RV's, trucks or cars.
Easy to install.
Side mount or frame mount available.
Equipped with two, independently switched high efficiency 12V DC fans.
24000 BTU output.
Dimensions: 16.75"W x 7"H x 5"D.

For medium boats (36 - 42 foot).
Most popular model.
Features a double-insulated outer surface.
Flue size: 5".
Burner size: 6" stainless steel 'Airflow'.
Overall dimensions: w 21.75" X h 23.5" X d 21.5".
Oven size: 10" X 13" X 10.5".
A 12V assist fan is standard, 24V or 32V optional.
Heat output: 6500 - 16250 BTU.
Net Weight: 110 lbs.
Shipping Weight: 156 lbs.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Dickinson insoline cement. For Dickinson Marine heaters and stoves. Adheres to fire bricks and metals. High-temperature resistant. Simply mix with water for installation or repairs. Use for: metal to metal, metal to masonry. Weight: 5 lbs.

Fire brick for Dickinson stoves. Medium duty, insulates combustion chamber. Part # 05-000. Weight: .5 lbs

Dickinson glass window. Heat-resistant and clear. For all Dickinson diesel oil stoves. Part # 05-065. Size: 3-3/8" x 3-3/8". Weight: .1 lbs.

Dickinson heat-resistant Hybond cement.
Air setting "Super 3000 Hybond sealant."
For use with Dickinson oil stoves and heaters.
Max joint thickness: 1/8" Sets at room temperature in 24 hours.
Use on: brick to brick, metal to brick, metal to metal.
Part # 05-040.
Size: 500 ML.

Dickinson propane galley range.
Features:
- Two efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Includes pot holders and removable cutting board.
Overall Dimensions: w 23" X d 14" X h 4.75".
Counter Cutout: w 21.5" X d 12.5" X h 4.25".

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Knob for Dickinson motor speed control switches. Part # 01-120. Weight: .01 lbs.

Dickinson speed control switch. Potentiometer rocker switch component only. Rated for 12 volts. Part # 01-072. Weight: .3 lbs.

Turns LP gas system ON or OFF from installed position.
Has green and red indicator lights.
CE certified gas control panel.
(No detection capabilities; may not be upgraded for LP gas detection.)
12 volts DC.
Dimensions: 2" X 4.5" X 2”.

Dickinson gas regulator for Sea-B-Que. Controls the flow of fuel to the burner. For both small and large Sea-B-Que grills. Easy installation. Part # 15-110.

Chef Master butane stove.
Offers a high heat output of 10,000 Btu/hour.
Equipped with an automatic Piezo electronic ignition system.
Housed in a high-impact protective carrying case.

Stove only. Does not include butane fuel canister (required for use).

Professional chef's torch.
From Chef-Master, a Mr. Bar-B-Q company.
Equipped with an anti-flare device.
Heats to 2012 degrees F.
Burns up to 3 Hours per 8 oz. canister of butane.
Quick, simple push-button ignition.

Head only. Does not include butane.

Dickinson "Mediterranean" propane galley range.
Features:
- Three efficient 11,000 and 7,000 BTU burners
- 100% stainless steel construction
- Thermostatically-controlled oven and broiler
- Includes pot holders and removable cutting board.
Dimensions: 20.375" X 21.75" X 20.25".
Net Weight: 80 lbs
Shipping Weight: 115 lbs.

To prevent damage from shipping, all stoves are required to be shipped on a pallet via Barge or Trucking company only.
Please call 1-800-426-2783 for further information.

Features:
CFC-free insulation foam and refrigerant
Separate refrigerator-only section
Battery protection with three settable levels
Easy-to-clean, removable wire basket
Stainless-steel interior prevents stains
Durable and corrosion-proof plastic exterior
Included DC cord with cigarette lighter plug
Optional adapter allows AC operation
Easily reversible and removable hinged lid.
Capacity: 1.06 cubic feet (30 liters, or 32 quarts).
Dimensions: 15.6" X 22" X 15.7".

 

Used with LP gas detector unit and panel.
Simple to install.
Length: 10 feet.

Brass construction. Size: 1/8" X 1/4".

High-strength fiberglass composite.
Type 1 valve.
OPD, DOT and TC approved.
See-thru feature for level of LP gas.
LP gas capacity: 4.2 gallons.
1260 cubic inch volume.

Replacement middle leg burner ring. Cast iron. Fits Atlantic and Beaufort stoves. Part # 04-060. Size: 7". Weight: 2.5 lbs.

Bulkhead-mounted heater for 30 - 36 foot boats Uses safe, economical diesel fuel. Small, compact. Stainless steel with a decorative valve cover. Heating and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Dimensions: w 8.5" X h 19.75" X d 10.5". Heat output: 6500 - 16250 BTU. Flue size: 3". Weight: 22 lbs.

A very compact low-pressure regulator.
Comes fully assembled and leak-tested.
Consists of a solid brass male POL cylinder fitting and street tee; a low-profile, watertight, stainless steel gauge; and a UL listed die-cast zinc body, with a 3/8" FPT outlet.
Designed to be tank-mounted.
Single port, single stage.
Gauge is rated for up to 300 PSI.
Meets ABYC marine standards (LPG System Leak Test 1).
Dimensions: 2.13" X 4.5" X 1.63".

Floor mounted heater for 36 - 40 foot boats. Uses safe, economical diesel fuel. Heating, cooking, and optional hot water from one appliance. A 12V assist fan is standard, 24V or 32V optional. Cast iron lid provides a fine cooking surface. Dimensions: w 10.75" X h 18" X d 17". Heat output: 6500 - 16250 BTU. Flue size: 4". Net Weight: 25 lbs - Shipping Weight: 35 lbs