Trailer bunk padding. Durable, weather-resistant polypropylene marine material. Carpet-like with durable acrylic backing. Easy to cut for custom installations. Grips surface of trailer cradle boards. Designed to retain minimal amounts of water. Color: Charcoal grey. Size: 8" X 12' roll.

Ribbed wobble roller with washer and insert. For EZ Loader trailers. Used in all applications where hog ring is used. as the keeper on the aluminum arm. Hard center core reduces deforming under heavy loads. Weight: .02 lbs.

Flat washer. For trailer rollers. Internal diameter: 1". Used with roll and hogrings. Weight: .01 lbs.

Brushing roll insert. For EZ Loader trailer roller. Nylon bushing insert. Size: 1.025". Weight: .01 lbs.

Polyvinyl construction. Will not mark your boat. Size: 5/8" X 3-1/2". Color: Black.

Solid high grade rubber. For 1/2" shaft.

Solid high grade rubber. Length: 3-1/2".

Solid high grade rubber. Length: 12"

High grade solid rubber. Fits on 7/8" shaft. Dimensions: 4-1/4" X 3".

Boat Guides help visually guide your boat onto trailer. High strength gripper mounting brackets attach firmly above/below trailer frame. Easy bolt on mounting. Fits trailer frames up to 3" x 5" high. Adjusts to fit any hull design. Non-marring, marine grade PVC uprights. Upright height: 50

Diameter: 1/2". Four per package.

Diameter: 5/8". Four per package.

Used for mounting brackets to trailer frame.
Galvanized steel to help prevent rusting.
Rod width: 1/2", 13 threads per inch.
Between each leg: 3-1/16".
Leg length: 6-1/4".

Includes amber PVC keel roller, shaft roller and pal nuts. 6" width between slots 8-3/8" inch bracket width.

Hog ring roller arm clamp. For EZ Loader trailer. Fastener is used in all applications of roller assemblies. Retains rollers to trailer roller arms. (Not used in keel or winch stand rollers.)

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with bolts and nyloc nuts. Dimensions: 8" with 1-1/16" slots.

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with bolts and nyloc nuts. Dimensions: 10" with 1-1/16" slots.

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with bolts and nyloc nuts. Dimensions: 12" with 1-1/16" slots.

For any size roller length. Vertical adjustment slots accept 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft. Includes right and left brackets.

Use with adjustable bolster brackets. For proper angle for bunk or bolster boards. Includes 1/2" x 1" bolts and 1/2" nylock nuts. Two per package.

Roller shaft. Perfect for keel rollers and bunk rollers. Zinc plated steel gives corrosion resistance. Includes pal nuts. Size: 5/8" X 13-1/4". Weight: .8 lb.

Galvanized steel. Includes roller shaft and two pal nuts. Dimensions: 5/8" X 5-1/4".

Includes two pal nuts. Galvanized steel. Dimensions: 5/8" X 9-1/4".

13" rubber rollers. Mounts on top/beneath frame for added adjustment. Hot dipped galvanized steel. Adjust to 13" wide each side. Fits: frames up to 4" Sold in pairs.

Roller angle adjusts to angle of hull. Allows for 16" of adjustment (8" each side). Single piece adjusting clamp with U-bolts. Fits all channel and tube frames up to 5".

Guide-on posts, a visual aid for your trailer. For boat loading and backing up. White PVC construction with galvanized metal core. Strong, impact resistant, and highly visible. Mounting hardware included. Sold in pairs. Size: 60". 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Hot dip galvanized for corrosion protection. Fits frames up to 4-1/4" in size. Bunk boards mount 19" above trailer frames. Side movement: 13" on each side. Sold in pairs with all hardware included. Size: 5 ft. 
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Heavy 11 gauge galvanized steel construction. Mount 2" bunks on edge. Slotted for integration with standard or deep-V hulls. Dimensions: 9-1/2", with 6" slot.

Heavy 11 gauge galvanized steel construction. Mount 2" bunks on edge. Slotted for integration with standard or deep-V hulls. Dimensions: 12-5/8", with 9-1/8" slot.

Zinc plated steel. Includes 2 pal nuts. Dimensions: 5/8" X 11-1/4".

Replacement "guide-on" roller. Molded black rubber construction. Dimensions: 2" X 9-1/2".

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with swivel fittings, bolts and nyloc nuts Dimensions: 10" with 1-1/16" slots.

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with swivel fittings, bolts and nyloc nuts Dimensions: 8" with 1-1/16" slots.

Designed to support bolster or bunk boards. Slotted for vertical adjustment. Features non-slip dimples to avoid movement. Packaged in pairs with swivel fittings, bolts and nyloc nuts Dimensions: 12" with 1-1/16" slots.

Roller bushing insert. Internal diameter: .812". Weight: .1 lb.

Zinc-plated.
Designed to outlast any conventional shaft.
Zerk grease fitting on each end for easy lubrication.
For use with keel rollers, spool rollers, or bow rollers.
Includes E-clips.

Fits a 5" roller.

Size: 5/8" X 6-1/4".