Trailer bunk padding. Durable, weather-resistant polypropylene marine material. Carpet-like with durable acrylic backing. Easy to cut for custom installations. Grips surface of trailer cradle boards. Designed to retain minimal amounts of water. Color: Charcoal grey. Size: 12" X 12' roll.

Trailer bunk padding. Durable, weather-resistant polypropylene marine material. Carpet-like with durable acrylic backing. Easy to cut for custom installations. Grips surface of trailer cradle boards. Designed to retain minimal amounts of water. Color: Charcoal grey. Size: 8" X 12' roll.

Ribbed wobble roller with washer and insert. For EZ Loader trailers. Used in all applications where hog ring is used. as the keeper on the aluminum arm. Hard center core reduces deforming under heavy loads. Weight: .02 lbs.

Flat washer. For trailer rollers. Internal diameter: 1". Used with roll and hogrings. Weight: .01 lbs.

Brushing roll insert. For EZ Loader trailer roller. Nylon bushing insert. Size: 1.025". Weight: .01 lbs.

Zinc-plated for corrosion resistance.
Perfect for keel rollers and bunk rollers.
Size: 1/2" X 12-3/4".
Fits 4" roller.

Bolster bracket.
Heavy-duty hot dipped galvanized steel.
Designed to support bolster or bunk boards.
Slotted for vertical adjustments.
Length: 10".

Galvanized steel. Two pieces. Will accommodate any size of roller length. May be vertically adjusted for stabilizing boat on trailer. Slot accept 7/16" or 1/2" bolts.

Roller shaft. Keeps your rollers lubricated. Perfect for keel rollers and bunk rollers. Zinc plated steel gives corrosion resistance. Includes pal nuts. Size: 1/2" X 6-1/4". Weight: .4 lbs.

Perfect for keel rollers and bunk rollers.
Zinc plated steel for corrosion resistance.
Size: 1/2".
Four per package.

Replacement roller shaft cap nuts - 4 per pack.
Perfect for keel rollers and bunk rollers.
Zinc plated steel for corrosion resistance.
Size: 5/8".

May be installed on aluminum boats, or inflatable boats with a hard transom.
Wheel-a-Weigh transom wheels are portable and removable.
Stainless steel frame and pivot bracket.
Inflatable 14-inch tires with roller bearings inside the hub.
330 lb. capacity.
Precision molded, non-corrosive wheel hubs.
Stainless steel installation hardware included.
Easy-to-follow instructions.

Sold in pairs. For any size roller length. Slot for vertical adjust to stabilize boat on trailer. Slots accept: 7/16" or 1/2" bolts. Use 1/2" or 5/8" roller shaft.

Nylon leafspring bushing spacer. For EZ Loader trailers. Fits into the loop on the end of a leafspring. Requires steel bushing inside, sold separately.

Gliding shim for trailer rollers.

Cast from resiliant, non-marring molded black polyvinyl. Allows a boat to snug down on a trailer. Oil, gas, and saltwater resistant. Diameter: 1/2".

Cast from resiliant, non-marring molded black polyvinyl. Allows a boat to snug down on a trailer. Oil, gas, and saltwater resistant. Diameter: 3/8".

Bow roller. Molded black plastic. Allows a boat to be snugged down onto a trailer. Size: 1/2" diameter.

Spool roller. Molded black plastic. Allows a boat to be snugged down on a trailer. Size: 5" X 1/2". Weight: 2 lbs.

Molded black plastic. Allows a boat to be snugged down on a trailer. Size: 4" X 1/2".

Cast from resiliant, non-marring molded black polyvinyl. Allows a boat to snug down on a trailer. Oil, gas, and saltwater resistant. Diameter: 1/2".

Keel roller - 12". Resilient, non-marring molded black polyvinyl construction. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag when launching boats. Oil, gas, and saltwater resistant. Shaft size: 5/8". Weight: 5.6 lbs.

Keel roller - 10". Resilient, non-marring molded black polyvinyl construction. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag when launching boats. Oil, gas, and saltwater resistant. Shaft size: 5/8". Weight: 4.2 lbs.

Keel end cap. Manufactured from non-marking polyvinyl. Installs on the outside of keel roller brackets. Color: Black. Size: 3" X 5/8". Weight: .5 lb.

Keel roller - 8". Resilient, non-marring molded black polyvinyl construction. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag when launching boats. Oil, gas, and saltwater resistant. Shaft size: 5/8". Weight: 2.9 lbs.

Molded black plastic. Allows a boat to be snugged down on a trailer. Size: 5" X 5/8".

Molded black plastic. Allows a boat to be snugged down on a trailer. Size: 4" X 5/8".

Non-marring black polyvinyl material. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag while launching a boat. Unaffected by oil, gas or saltwater. Diameter: 3/4" X 4".

Molded amber plastic. Allows a boat to be snugged down on a trailer. Size: 4" X 5/8".

Molded amber plastic. Allows a boat to be snugged down on a trailer. Size: 5" X 5/8".

Cast from resiliant, non-marring molded amber polyvinyl. Allows a boat to snug down on a trailer. Oil, gas, and saltwater resistant. Diameter: 1/2".

Keel roller - 8". Resilient, non-marring molded amber polyvinyl construction. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag when launching boats. Oil, gas, and saltwater resistant. Shaft size: 5/8". Weight: 2.9 lbs.

Super bow roller - 4". Molded from resiliant, non-marring polyvinyl. Allows a boat to be snugged down on a trailer. Comes in three pieces for maximum protection. Unaffected by oil, gas or saltwater. Size: 1/2" shaft diameter. Weight: 2.2 lbs.

Molded from resiliant, non-marring polyvinyl. Allows a boat to be snugged down on a trailer. Comes in three pieces for maximum protection. Unaffected by oil, gas or saltwater. Size: 1/2" shaft diameter.

Non-marring, polyvinyl material. Allows a boat to roll smoothly on a trailer. Spins freely to reduce drag while launching a boat. Unaffected by oil, gas or saltwater. Diameter: 4".

Molded amber polyvinyl plastic. Allows a boat to be snugged down onto a trailer. Size: 1/2" diameter.