Used to file circular openings or concave surfaces. Single cut. Tapered slightly toward point. Length: 8".

Trigger-Start torch head - TS4000.
One-click instant-on trigger igniter for easy lighting.
May be locked on for continuous use.
Emits a hot, efficient flame.
Uses propane or propylene fuel (MAP-Pro).

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 4".

Megapro pocket-sized electronics screwdriver.
Compact and designed for electronics and computer parts.
Comes with special small Phillips, square, and flat bits.

Bends so you can tighten screws from any angle.
Reaches awkwardly-placed screw heads, up to 90°.
Perfect for tightening hose clamps.
Size: 9/32" (7mm).

Wood scraper All-metal construction. Four edges on a 1-1/2" blade. Features an aggressive camber ground blade. Weight: .44 lb.

Features a patented pullout bit cartridge
Makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin.
Shaft opening serves as a 1/4" hex driver.
Alloy steel shaft.
Palm saver cap keeps you from getting blisters.
Comes with 15 bit tips:
- Point types: double-ended, Phillips, square, flat, Torx.
- Tip types: Phillips, square awl, valve stem, slotted, 5/16" miniature nut driver.

Wood scraper. All-metal construction. Four edges on a 2-1/2" blade. Features an aggressive camber ground blade. Weight: .7 lb.

Forged stainless steel.
Point is set with epoxy into wood handle.
Length: 54".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options. 

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 10".

Two-piece Bernz-O-Matic propane torch kit.
Includes brass torch with adjustable flame knob.
Comes with 14.1 oz. container of propane.
An easy, do-it-yourself soldering kit.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 8".

 All the hand tools you need around the car, boat, or home to do simple fixes or advanced repair.

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
18 degree top plate articulates in all directions
Threaded center rod allows for smooth adjustment
May be stacked for convenient storage.
Size range: 89" - 102".

NOTE: Due to the size of this product, shipping via UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 24" - 36".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 64" - 79".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Flat-topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Size range: 79" - 96".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Made from first-rate American steel.
Dimensions: 54" X 41.5" X 48".
Rated for 20,000 lbs.

Intended to be used alongside a bow rack. 

Brownell TLC boat pad. Gives "Tender Loving Care" to your boat. Protects your boat's finish: epoxy, gelcoat, or wood. Provides drainage to eliminate moisture on hulls. May be mounted to any boat stand or trailer top. 

Stern rack. For use with fork lifts and hydraulic trailers. Ideal for wash downs and service at dry stack facilities. Fast and efficient set-up. Compact for storage when not in use. Dimensions: 41" X 31-1/2". Weight: 77 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Bow rack. For use with fork lifts and hydraulic trailers. Ideal for wash downs and service at dry stack facilities. Fast and efficient set-up. Dimensions: 28" X 24.5" X 30". Weight: 67 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell heavy-duty steel boat dolly. Features: - 6" X 2" phenolic wheels with brakes and casters - Designed for low ground clearance (2.5") - One pair accommodates boats up to 8,000 pounds. Adjustable height: 15-1/2" - 21-1/2". Adjustable width: 35-1/2" - 43-1/2". Weight: 110 lbs.

Keel bench. Provides a large surface area to support your boat. One bench should be used for each 20,000 of vessel weight. Size: 16" high. Weight: 50 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Stackable keel stand. Adjustable from 20" - 33". Heavy duty wide V-top. One for each 10,000 pounds of vessel weight recommended. Stackable for easy storage. Perfect for multi-hulls. 

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell motorboat stand base.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Size range: 33" - 50".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Replacement top for boat stand. Painted orange. Plywood construction.

Keel stand. 12" - 24". Hot dipped steel. Makes bottom painting easy without lifting the boat. One keel stand for each 20,000 pounds is recommended. Weight: 22 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 35" - 52".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell flat topped sailboat stand.
Designed to be placed under the angled hulls of sailboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions.
- Threaded center rod allows for smooth adjustment.
- May be stacked for convenient storage.
Size range: 48" - 65".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Orange V-shaped top with screw threads. Narrow pad with foam. Durable steel construction. Height: 27". Pad dimensions: 3" X 12". NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 33" - 50".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 29" - 46".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Brownell motorboat stand.
Designed to be placed under the flat chines of powerboats.
Always use keel supports with boat stands.
Features:
- 18 degree top plate articulates in all directions
- Threaded center rod allows for smooth adjustment
- May be stacked for convenient storage.
Size range: 41" - 58".

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.